한국유체기계학회 논문집 (The KSFM Journal of Fluid Machinery)

한국유체기계학회 (Korean Society for Fluid machinery)
권호 표지
DOI QR코드

DOI QR Code

가중평균 대리모델을 사용한 딤플 유로의 최적설계

Design Optimization of a Channel Roughened by Dimples Using Weighted Average Surrogate Model

  • 이기돈 (인하대학교 기계공학과 대학원) ;
  • 김광용 (인하대학교 기계공학부)
  • 발행 : 2008.02.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Staggered dimples printed on opposite walls of an internal cooling channel are formulated numerically and optimized to enhance heat transfer performance. Nusselt number and friction factor based objectives are considered and a weighted average surrogate model is used to approximate the data generated by numerical simulation. The dimpled channel shape is defined by three geometric design variables, and the design point within design space are selected using Latin hypercube sampling. A weighted-sum method for multi-objective optimization is applied to integrate multiple objectives into a single objective. By the optimization, the objective function value is improved largely and heat transfer rate is increase much higher than pressure loss increase due to shape deformation. Channel with vertically non-symmetric optimum dimples is tested and found that the best appears if dimples on opposite wall are displaced by one quarter of dimple spacing.

키워드

참고문헌

  1. Ligrani, P. M., Oliveira, M. M. and Blaskovich, T., 2003, 'Comparison of Heat Transfer Augmentation Techniques,'AIAA J., Vol. 41, No. 3, pp. 337-362 https://doi.org/10.2514/2.1964
  2. Ridouane, E. H., and Campo, A., 2007, 'Heat Transfer and Pressure Drop Characteristics of Laminar Air Flows Moving in a Parallel Plate Channel With Transverse Hemi-Cylindrical Cavities,'International Journal of Heat and Mass Transfer, (Article in press)
  3. Silva, C., Marotta, E. and Fletcher, L., 2007, 'Flow Structure and Enhanced Heat Transfer in Channel Flow With Dimpled Surfaces: Application to Heat Sinks in Microelectronic Cooling,' Journal of Electronic Packaging, Vol. 129, pp. 157-166 https://doi.org/10.1115/1.2721087
  4. Hwang S. D. and Cho H. H., 2006, 'Heat Transfer Enhancement of Internal Cooling Passage Using Dimple/Protrusion,' 13 Inter- national Heat Transfer Conference, Sydney, Austrailia, HTE24
  5. Mahmood, G.I., and Ligrani, P.M., 2002, 'Heat Transfer in a Dimpled Channel: Combined Influences of Aspect Ratio, Temperature Ratio, Reynolds Number, and Flow Structure,' International Journal of Heat and Mass Transfer, Vol. 45, No. 10, pp. 2011-2020 https://doi.org/10.1016/S0017-9310(01)00314-3
  6. Burgess, N. K. and Ligrani, P. M., 2004, 'Effects of Dimple Depth on Nusselt Numbers and Friction Factors for Internal Cooling Channel,' ASME Paper No. GT2004-5432
  7. Queipo, N. V., Haftka, R. T., Shyy, W., Goel, T., Vaidyanathan, R. and Tucker, P. K., 2005, 'Surrogate-based analysis and optimization,' Progress in Aerospace Sciences, Vol. 41, pp. 1-28 https://doi.org/10.1016/j.paerosci.2005.02.001
  8. Li, W. and Padula, S., 2004, 'Approximation Methods for Conceptual Design of Complex Systems,' Eleventh International Conference on Approximation Theory(eds. Chui, C., Neaumtu, M., Schumaker, L.), Tennessee, USA
  9. Goel, T., Haftka, R. T., Shyy, W. and Queipo, N., 2007, 'Ensemble of Surrogates,' Structural and Multidisciplinary Optimization, Vol. 33. No. 3, pp. 199-216 https://doi.org/10.1007/s00158-006-0051-9
  10. Samad, A., Shin, D. Y., Kim, K. Y., Goel, T. and Haftka, R. T., 2007, 'Surrogate Modeling for Optimization of a Dimpled Channel to Enhance Heat Transfer Performance,' Journal of Thermophysics and Heat Transfer, Vol. 21, Number 3, pp. 667-670 https://doi.org/10.2514/1.30211
  11. Samad, A., Kim, K. Y., Goel, T., Haftka, R. T. and Shyy, W., 2007, 'Multiple Surrogate Modeling for Axial Compressor Blade Shape Optimization,' Journal of Propulsion and Power, (Accepted for publication)
  12. CFX-11.0 Solver Theory, Ansys inc., 2006
  13. Menter, F. and Esch, T., 2001, 'Elements of Industrial Heat Transfer Predictions,' 16th Bazilian Congress of Mechanical Engineering (COBEM), Uberlandia, Brzil
  14. Bardina, J. E. and Huang, P. G, Coakley, T., 1997, 'Turbulence Modeling Validation,' AIAA Paper 97-2121
  15. Lai, Y. G. and So, R. M. C., 1990, 'Near-Wall Modeling of Turbulent Heat Fluxes,' Int. J. Heat Mass Transfer, Vol. 33, pp. 1429-1440 https://doi.org/10.1016/0017-9310(90)90040-2
  16. Kim, H. M. and Kim, K. Y., 2004, 'Design Optimization of Rib-roughened Channel to Enhance Turbulent Heat transfer,' International Journal of Heat and Mass Transfer, Vol. 47, Issue 23, pp. 5159-5168 https://doi.org/10.1016/j.ijheatmasstransfer.2004.05.035
  17. JMP$\Re$ 5.1, 2004, SAS Institute, Inc
  18. Kim, K. Y. and Choi, J. Y., 2005, 'Shape Optimization of a Dimpled Channel to Enhance Turbulent Heat Transfer,' Numerical Heat Transfer, Part A, Vol. 48, No. 9, pp. 901-915 https://doi.org/10.1080/10407780500226571
  19. Collette, Y. and Siarry, P., 2003, Multiobjective Optimization, Principles and Case Study, 1st ed., Springer-Verlag, New York
  20. Burgess, N. K., Oliveira, M. M., and Ligrani, P. M., 2003, 'Nusselt Number Behavior on Deep Dimpled Surfaces within a Channel,' Journal of Heat Transfer, Vol. 125, pp. 11-18 https://doi.org/10.1115/1.1527904
  21. Moon, H. K., Connell, T. O., and Glezer, B., 2000, 'Channel Height Effect on Heat Transfer and Friction in a Dimpled Passage,' Journal of Engineering for Gas Turbines and Power, Vol. 122, pp. 307-313 https://doi.org/10.1115/1.483208
  22. Isaev, S. A. and Leont'ev, A. I., 2003, 'Numerical Simulation of Vortex Enhancement of Heat Transfer Under Conditions of Turbulent Flow Past a Spherical Dimple on the Wall of a Narrow Channel,' High Temperature, Vol. 41, No. 5, pp. 665-679 https://doi.org/10.1023/A:1026100913269