Journal of Navigation and Port Research (한국항해항만학회지)

Korean Institute of Navigation and Port Research (한국항해항만학회)
권호 표지
DOI QR코드

DOI QR Code

Detection and Isolation Method for Operator Failure by Unknown Input Observer

  • Kim, Hwan-Seong (Dept. of Logistics, Korea Maritime University) ;
  • Kim, Seung-Min (Dept. of Mechatronics Examination, The Korean Intellectual Property Office)
  • Published : 2008.03.31
Download PDF
⟨ Previous Next ⟩

Abstract

In this paper, a fault detection method for operator failures using the observation technique is proposed. The suggested algorithm is extended using the conventional sensor/actuator fault detection method. First, it is assumed that operator failure affects human work operations, as it is an external input signal. With this assumption, a human work model with operator failure is suggested. Second, an unknown input observer with proportional and integral gains is introduced. The characteristic of this observer of estimating an external signal without an exact input is shown, and the conditions for the detection of an operator failure are proposed. Finally, by simulating the container crane operations, it is verified that the observer can accurately detect an operator failure and estimate its magnitude from the given internal signal.

Keywords

References

  1. Antsaklis, P. J. and Anthony, N. M. (1997), 'Linear Systems', McGraw-Hill
  2. Bryson, A. E. and Ho, J. Y. C. (1975), 'Applied Optimal Control: Optimisation, Estimation, and Control', John Wiley&Sons, New York
  3. Clark, R. N. (1978), 'Instrument fault detection', IEEE Trans. Aero. and Electr. Syst., AES-14, pp. 456-465 https://doi.org/10.1109/TAES.1978.308607
  4. Efe, M. O. and Kaynak, O. (1999), 'Neural-fuzzy approaches for identification and control of non-linear Systems', Proceedings of the IEEE International Symposium on Industrial Electronics, pp. TU2-TU11
  5. Frank, P. M. and Keller, L. (1980), 'Sensitivity discriminating observer design for instrument failure detection', IEEE Trans. Aero. and Elect. Syst., AES-16, pp. 456-46
  6. Franklin, G. F., Powell, J. D., and Workman, M. (1998), 'Digital Control of Dynamic Systems', Addison Wesley
  7. Garcia, E. A. and Frank, P. M. (1999), 'A novel design of structured observer-based residuals for FDI', Proceedings of the American Control Conference, pp. 1341-1345
  8. Glass, B. J. and Wong, C. M. (1988), 'A knowledgebased approach to identification and adaptation in dynamical systems control', Proceedings of the 27th IEEE Conference on Decision and Control, pp. 881-886
  9. Hou, M. and Muller, P. C. (1994), 'Fault detection and isolation observers', Int. J. Control, 60(5), pp. 827-846 https://doi.org/10.1080/00207179408921497
  10. Kim, H. S., Kim, S. B., and Kawaji, S. (1997),'Fault detection and isolation of system using multiple PI observers', Journal of the Korean Society of Precision Engineering, 14(2), pp. 41-47
  11. Kim, H. S., Tran, N. H. S., and Kim, S. H. (2005), 'Design of human works model for gantry crane system', International Journal of Navigation and Port Research, 29(2), pp. 135-140 https://doi.org/10.5394/KINPR.2005.29.2.135
  12. Levine, W.S. (1996), 'The Control Handbook', IEEE Press, Vol. II
  13. Ljung, L. (1999), 'System Identification: Theory for User', Prentice Hall PTR
  14. Malek, A. A. and Marmarelis, V. Z. (1988), 'Modelling of task-dependent characteristics of human operator dynamics pursuit manual tracking', IEEE Trans. Syst., Man, and Cybernetics, 18(1), pp. 163-172 https://doi.org/10.1109/21.87065
  15. Martens, D. (1999), 'Neural networks as a tool for the assessment of human pilot behaviour in wind shear', Aerospace Science and Technology, 3(1), pp. 39-48 https://doi.org/10.1016/S1270-9638(99)80021-2
  16. Park, J. P. and Lee, C. W. (1999), 'Diagnosis of faults in rolling element bearings by using directional spectra of vibration signals', KSME Int. Journal, 13(1), pp. 63-73 https://doi.org/10.1007/BF02946124
  17. Shinners, S. M. (1947), 'Modelling of human operator performance utilizing time series analysis', IEEE Trans. Syst. Man Sybern., SMC-4(5), pp. 446-458
  18. Sinha, N. K. and Kuszta, B. (1983), 'Modeling and Identification of Dynamic Systems', Van Nostr and Reinhold Company, New York
  19. Skogestad, S. and Postlethwaite, I. (1996), 'Multivariable Feedback Control, Analysis and Design', John Wiley & Sons, New York
  20. Viswanadham, N. and Srichander, R. (1987), 'Fault detection using unknown-input observer', Control-Theory and Advanced Technology, 3(2), pp. 91-101
  21. Wang, H. and Daley, S. (1996), 'Actuator fault diagnosis: an adaptive observer based technique', IEEE Trans. on Automatic Control, 41(7), pp. 1073-1078 https://doi.org/10.1109/9.508919
  22. Yehia, M. E. (1995), 'Human operator behaviour modelling using non-linear identification techniques', Proceeding of Instrumentation and Measurement Technology Conference, pp 211-216
  23. Zhou, K. and Doyle, J. C. (1998), 'Essentials of Robust Control', Prentice Hall