DOI QR코드

DOI QR Code

The Modified Two-axis Vector Controller of Linear Induction Motor to Apply to the Non-contact Stage with Large Workspace

대면적 비접촉 스테이지에 구동기 적용을 위한 선형유도기의 변형된 2축 벡터 제어기

  • Published : 2008.04.01

Abstract

To effectively cope with a complexity of kinematic metrology due to workspace enlargement of the planar stage, the linear induction motor is suggested as its new driving source. Especially, the linear induction motor under uniform plate type of secondary doesn't inherently have a periodical force ripple which is generally shown in the brushless DC motor. But, it presents a poor transient characteristic at zero or low speed zone owing to time delay of flux settling, resulting in slow response. To improve the servo property of linear induction motor and apply successfully it to the precision stage, this paper discusses a modified vector control methodology. The controller has a novel input form, fixed d-axis current, q-axis current and forward-fed DC current, to control thrust force and normal force of the linear induction motor independently. Influence of the newly introduced input and the feasibility of controller are validated experimentally.

Keywords

References

  1. 한혁, 서민호, "평판디스플레이 요소장비-LCD 장비," KISTI TCI report, 2006
  2. 김민영, "해외 선진국의 반도체 장비 기술 동향," KISTI 미래선도기술 이슈분석보고서, 2006
  3. 김재열, 이일형, "초정밀 시스템의 나노위치제어기술," KISTI Technical trend report, 2002
  4. T. Morizane, N. Kimura and K. Taniguchi, "Simultaneous control of propulsion and levitation of linear induction motor in a novel maglev system," Proceedings of Power Electronics and Motion Control Conference, vol. 1, pp. 127-131, August 2000
  5. I. Takashashi and Y. Ide, "Decoupling control of thrust and attractive force of a LIM using a space vector control inverter," IEEE Trans. on Industry Applications, vol. 29, no. 1, pp. 161-167, 1993 https://doi.org/10.1109/28.195902
  6. H. Amirkhani, A. Shoulaie, and P. Ramezanpoor, "A new thrust estimation method for on-line control of thrust and flux a LIM using a fuzzy space-vector controller," Proceedings of Inter. Conf. on Control Applications, pp. 932-936, September Italy, 1998
  7. R. Wai, R. Duan, W. Liu, and S. Yu, "Nonlinear decoupled control for linear induction motor servo drive," The 27th Annual Conf. of IEEE Industrial Electronics Society, pp. 635-640, 2001
  8. K. Yoshida and T. Yoshida, "Soft touch mass-reduced-mode control of attractive force in SLIM vehicle propulsion," IEEJ Trans. IA, vol. 123, no. 5, pp. 575-581, 2003 https://doi.org/10.1541/ieejias.123.575
  9. 정광석, 이상헌, "유도형 축방향 모터의 6축력 제어를 이용한 대회전 구현용 통합 구동기," 제어.자동화.시스템공학 논문지, 제 12 권, 제 8 호, pp. 798-804, 2006. 8 https://doi.org/10.5302/J.ICROS.2006.12.8.798
  10. P. Vas, Sensorless Vector and Direct Torque Control, OXFORD University PRESS, 1996