소수성 모노머들을 포함한 콘택트렌즈의 특성에 관한 연구

Study on Characterization of Contact Lens with Hydrophobic Monomers

  • 예기훈 (대불대학교 안경광학과) ;
  • 김태훈 (대불대학교 안경광학과) ;
  • 성아영 (대불대학교 안경광학과)
  • Ye, Ki-Hun (Department of Ophthalmic Optics Daebul University) ;
  • Kim, Tae-Hun (Department of Ophthalmic Optics Daebul University) ;
  • Sung, A-Young (Department of Ophthalmic Optics Daebul University)
  • 투고 : 2008.07.31
  • 심사 : 2008.09.10
  • 발행 : 2008.09.30

초록

목적: 본 연구에서는 HEMA(2-Hydroxyethyl methacrylate)/Silicone 기본 조합에 각각 BMA(Butyl methacrylate)와 MMA(Methyl methacrylate)를 혼합하여 콘택트렌즈의 재료로 사용한 후, 각각의 물리적 특성을 비교하였다. 방법: 캐스트 몰드 법을 이용하여 각각의 렌즈를 제조 하였으며, 각 시료의 물리적 특성에 대한 평균값을 사용하여 분석하였다. 결과: HEMA/silicone/BMA 조합의 경우, 함수율은 24.69%에서 29.26%, 인장강도는 0.109 kgf에서 0.263 kgf의 분포를 나타내었다. HEMA/silicone/MMA 조합의 경우, 팽윤율은 13.56%에서 14.83%, 함수율은 25.61%에서 29.33%, 인장강도는 0.107 kgf에서 0.286 kgf의 분포를 나타내었다. 결론: 두 조합은 HEMA/silicone(0.20%~11.50%)의 기본 조합에서 BMA(5.15%)와 MMA(5.15%)를 일정량 첨가한 것으로 두 경우 모두에서 BMA의 양과 MMA의 양이 상대적으로 감소할수록 팽윤율과 함수율이 증가하는 경향을 보였다. HEMA/silicone/MMA 조합의 경우, 인장강도는 silicone의 비율이 증가할수록 4-MMA 시료까지는 다소 증가하는 경향을, HEMA/silicone/BMA 조합의 경우, 인장강도는 silicone의 비율이 증가할수록 감소하는 경향을 나타내었다.

Purpose: In this study, we compared the physical properties of the compositions that were mixed with basic materials of HEMA (2-Hydroxyethyl methacrylate)/Silicone and BMA (Butyl methacrylate), MMA (Methyl methacrylate) by making the silicone contact lens. Method: Each sample of contact lenses was fabricated by cast mould method. We analyzed results by using average values of physical property of each sample. Results: In the composition of HEMA/Silicone/BMA, water contents of samples showed the value from 24.69% to 29.26%. Ultimate strength of samples showed the value from 0.109 kgf to 0.263 kgf. In the composition of HEMA/Silicone/MMA, swelling ratio of samples showed the value from 13.56% to 14.83%. Water contents of samples showed the value from 25.61% to 29.33%. Ultimate strength of samples showed the value from 0.107 kgf to 0.286 kgf. Conclusions: The compositions of percents of silicone were ranged from 0.20% to 11.50% and the composition percent of BMA and MMA was 5.15% in total. Swelling ratio and water contents increased with decreasing of BMA (Butyl methacrylate) and MMA (Methyl methacrylate) percent. In the composition of HEMA/Silicone/MMA, the values of ultimate strength increased with increasing of silicone percent to 4-MMA sample. In the composition of HEMA/Silicone/BMA, the values of ultimate strength decreased with increasing of silicone percent.

키워드