DOI QR코드

DOI QR Code

Analysis of Total Harmonic Distortion in Microspeaker Considering Coupling Effect

연성 효과를 고려한 마이크로스피커 왜율분석

  • 권중학 (부산대학교 기계공학부 기계설계시스템) ;
  • 김광석 (부산대학교 기계공학부 기계설계시스템) ;
  • 방기창 (부산대학교 기계공학부 기계설계시스템) ;
  • 황상문 (부산대학교 기계공학부)
  • Published : 2008.04.20

Abstract

With the advent of mobile phone, digital multimedia broadcasting(DMB) service is to be realized for multimedia data communication. For an acoustic part, a smaller and lighter microspeaker is also soon to be realized as an MP3 song player and a speakerphone. Sound quality in the microspeaker is becoming more important in mobile phones. It is evaluated by total harmonic distortion(THD). THD is the proportion of higher order frequencies output response to sinusoidal input signal. It is affected by uneven magnetic distribution and nonlinear response of diaphragm. In this paper, harmonic distortion is analyzed by considering magnetic and mechanical coupling effects. Simulated results of THD are compared with experimental data. Results show that THD in lower frequency range is higher due to high displace on voice coil and high mechanical response of high order frequency.

Keywords

References

  1. Hwang, S. M., Hong, G. S., Lee, H. J, Kim, J. H. and Jeung, S. K., 2004, 'Reduction of Harmonic Distortion in Dual Magnet Type Microspeaker', IEEE Transactions on Magnetics, Vol. 40, No. 4, pp. 2004-2006
  2. Hwang, S. M., Lee, H. J., Kwon, J. H, Hwang, G. Y. and Yang, Y. C., 2006, 'Development of Combined Permanent Magnet Type Microspeakers Used for Mobile Phones', Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 16, No. 2, pp. 183-189 https://doi.org/10.5050/KSNVN.2006.16.2.183
  3. Hong, D. K., Woo, B. C., Ahn, C. W. and Han, G. J., 2005, 'Vibration Analysis of Microspeaker Diaphragm', Proceedings of the KSNVE Annual Spring Conference, pp. 551-554
  4. Kinsler, L. E., 1982, Fundamentals of Acoustics, John Wiley & Sons, Inc., New York

Cited by

  1. Investigation on Vibration Characteristics of Micro Speaker Diaphragms for Various Shape Designs vol.30, pp.8, 2013, https://doi.org/10.7736/KSPE.2013.30.8.790