한국정밀공학회지 (Journal of the Korean Society for Precision Engineering)

  • 제25권6호
  • /
  • Pages.126-133
  • /
  • 2008
  • /
  • 1225-9071(pISSN)
  • /
  • 2287-8769(eISSN)
한국정밀공학회 (Korean Society for Precision Engineering)
권호 표지

고속.정밀 이송용 리니어모터 개발을 위한 열적 안정성 향상에 관한 연구

A Study on Improvement of the Thermal Stability for Development of Linear Motors with High Speed and Accuracy

  • 황영국 (창원대학교 기계설계공학과 대학원) ;
  • 이춘만 (창원대학교 기계설계공학과) ;
  • 은인웅 (경기공업대학 금형디자인과)
  • 발행 : 2008.06.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Linear motors are efficient mechanism that offers high speed and positioning accuracy. By eliminating mechanical transmission mechanisms such as ball screw or rack-pinion, much higher speed and greater acceleration can be achieved without backlash or excessive friction. However, an important disadvantage of linear motor system is its high power loss and heating up of motor and neighboring machine components on operation. For the application of the linear motors to precision machine tools an effective cooling method and thermal optimizing measures are required. This paper presents an investigation into the thermal behavior of linear motors with the objective of deriving the optimum cooling conditions. To reach these goals several experiments were carried out, varying operating and cooling conditions. From the experimental results, this research proposed cooling conditions to improve the thermal characteristics of the linear motors.

키워드

참고문헌

  1. Eun, I. U., "Optimization of the Thermal Behavior of Linear Motors with High Speed and Force [1st paper]," Journal of the Korean Society for Precision Engineering, Vol. 19, No. 6, pp. 184-191, 2002
  2. Eun, I. U., "Optimization of the Thermal Behavior of Linear Motors with High Speed and Force [2nd paper]," Journal of the Korean Society for Precision Engineering, Vol. 19, No. 7, pp. 163-170, 2002
  3. Eun, I. U., "Comparison between Asynchronous and Synchronous Linear Motors as to Thermal Behavior," International Journal of the Korean Society of Precision Engineering, Vol. 2, No. 3, pp. 61-68, 2001
  4. Eun, I. U., "Improvement of the Thermal Characteristics of Synchronous Linear Motors Through Insulation," Journal of the Korean Society for Precision Engineering, Vol. 19, No. 3, pp. 123-130, 2002
  5. Hsue, A. W. J., Yan, M. T. and Ke, S. H., "Comparison on linear synchronous motors and conventional rotary motors driven Wire-EDM processes," Journal of Materials Processing Technology, pp. 478-485, 2007
  6. Chung, I. Y., Kang, E. G., Lee, S. W. and Choi, H. Z., "A Study on thermal characteristics of linear motor for high speed machining tools," Proceedings of the Korean Society for Precision Engineering Spring Conference, pp. 98-101, 2001
  7. Hwang, Y. K., Eun, I. U. and Lee, C. M., "A Study on the Cooling Parameter Decision of Linear Motor System by Finite Volume Method," Proceedings of the Korean Society for Precision Engineering Spring Conference, pp. 449-450, 2006
  8. Hwang, Y. K., Jung, J. W., Eun, I. U., Lee, C. M. and Choi, J. K., "A Basic Study on Improvement of the Thermal Stability for Development of High Speed, Accuracy Linear Motors," Proceedings of the Korean Society for Precision Engineering Autumn Conference, pp. 473-474, 2007
  9. Jung, J. H., Shin, S. H. and Lee, S. R., "Optimization of the Design Variables of Linear Motor by FEM," Trans. of KSME, A, Vol. 26, No. 7, pp. 1232-1240, 2002 https://doi.org/10.3795/KSME-A.2002.26.7.1232
  10. Park, S. H., "Design of Experiments," Minyoungsa, pp. 305-329, 2005
  11. Cengel, Y. A., "Heat Transfer A Practical Approach," McGraw-Hill, pp. 362-408, 2002