한국자동차공학회논문집 (Transactions of the Korean Society of Automotive Engineers)

  • 제16권3호
  • /
  • Pages.111-117
  • /
  • 2008
  • /
  • 1225-6382(pISSN)
  • /
  • 2234-0149(eISSN)
한국자동차공학회 (The Korean Society of Automotive Engineers)
권호 표지

자동차 워터펌프 밸런스 홀 직경이 수력성능 및 축추력에 미치는 영향

Effects of the Balance Hole Diameter of an Automotive Closed Type Water Pump on Hydraulic Performance and Axial Force

  • 발행 : 2008.05.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The aim of this paper was to investigate the fluid dynamic behavior of the automotive closed type water pump with balance hole in order to evaluate and justify its overall hydraulic performance and, in particular to analyze the effects of the balance hole on the reduction of hydraulic flow force of it. The analysis has been peformed by applying the commercial computational fluid dynamics (CFD) code, Fluent, to the solution of the 3-D turbulent flow fields of automotive closed type water pump. The reliability of the employed analysis was demonstrated by the comparison between numerical result and experimental data. Although, hydraulic head of the closed type water pump with 3mm diameter of balance hole decreased by 1.1%, axial flow force was effectively reduced by 13.3%, comparison of it with no hole at design point.

키워드

참고문헌

  1. J. Tuzson, Centrifugal Pump Design, John Wiley & Sons Inc., New York, 2000
  2. S. Zoz, W. Thelen, T. Alcenius and M. Wiseman, "Validation of Methods for Rapid Design and Performance of Water Pumps," SAE 2001-01-1715, 2001
  3. A. Deguchi and Y. Nomoto, "Development of Design Method for a High-Efficiency Water Pump," JSAE 9838688, 1998
  4. K. Majidi and H. E. Siekmann, "Calculation of Secondary Flow in a Centrifugal Pump Using 3D Viscous Flow Computation Techniques," Proceedings of the 6th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Vol.2, 1996
  5. A. Kaps and H. E. Siekmann, "Numerical Flow Analysis in a Centrifugal Pump for Optimization of the Casing with regard to Hydraulic Efficiency and Bearing Forces," Proceedings of the 6th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Vol.2, 1996
  6. H. S. Heo, K. S. Park, G. S. Lee and J. P. Won, "A Study on the Performance Prediction of Automotive Water Pump with Double Discharge Single Suction," Transactions of KSAE, Vol.12, No.6, pp.103-110, 2004
  7. H. S. Heo, G. S. Lee and S. J. Bae, "Effect of Shape of Discharge Port on Hydraulic Performance of Automotive Closed Type Water Pump," Transactions of KSAE, Vol.12, No.6, pp.103-110, 2004