Transactions of the Korean Society of Automotive Engineers (한국자동차공학회논문집)

The Korean Society of Automotive Engineers (한국자동차공학회)
권호 표지

Characteristic Analysis of the Damper Cylinder for the Automotive Hydraulic Clutch System

차량용 유압 클러치시스템의 댐퍼실린더 특성해석

  • Lee, Choon-Tae (Department of Automotive & Mechanical Engineering, Silla University)
  • 이춘태 (신라대학교 자동차기계공학과)
  • Published : 2008.05.01
Download PDF
⟨ Previous Next ⟩

Abstract

The clutch system is a subcomponent of the transmission that is designed to engage and disengage power flow between the engine and the transmission. Recently, the engine power of automobile has been continuously increased because of customer's demand for the bigger one. As the engine power is increased, the vibration transmitted to the hydraulic clutch operating system has been increased. Therefore the demand for the reduction of clutch pedal vibration during the operation has been increased. This paper describes the pressure pulsation reduction characteristics of the damper cylinder which is applied to the hydraulic clutch operating system. And the purpose of this study is to propose an analysis model and investigate the effect of the design variable variations for the hydraulic clutch system. Especially, we studied the effect of damper cylinder parameter variations on the hydraulic clutch system performance.

Keywords

References

  1. I.-Y. Lee, "High Speed Computing Method of Unsteady Laminar Pipe Flow by Characteristics Method," KSMME, Vol.14, No.1, pp.20-27, 1990
  2. J.-C. Lee, "An Investigation into the State-Space Model for a Hydraulic Attenuator," Journal of the KSPE, Vol.19, No.5, pp.168-175, 2002
  3. D.-T. Kim and J.-M. Lee, "Attenuation Characteristics of Fluid-Borne Pressure Ripple in Automotive Power Steering Hydraulic Hoses," Journal of the KSMTE, Vol.7, No.3, pp.22-28, 1998
  4. J.-C. Lee, Y.-S. Jeong and J.-H. Kim, "Development of Performance Analysis Program for a Hydraulic Shimmy Damper of Steering System," transactions of KSAE, Vol.12, No.1, pp.174-183, 2004
  5. B.-S. Lee, "Friction Characteristics of an Hydraulic Cylinder for an Automotive Manual Clutch," Transactions of KSAE, Vol.14, No.4, pp.32-38, 2006
  6. M. C. Hastings and C. Chen, "Analysis of Tuning Cables for Reduction of Fluidborne Noise in Automotive Power Steering Hydraulic Lines," SAE 931295, pp.277-282, 1993
  7. S. Nagata, "Simulation of Resonator Hose," Proceedings of JHPS, pp.219-132, 1993
  8. P. Larsson, "Flow Ripple Reduction in Hydrostatic Transmission by means of Fluid Power Attenuators," Proceedings of 2nd JHPS International Symposium on Fluid Power, pp.341-348, 1993