Restorative Dentistry and Endodontics

The Korean Academy of Conservative Dentistry (대한치과보존학회)
권호 표지
DOI QR코드

DOI QR Code

Shear bond strength of dentin bonding agents cured with a plasma arc curing light

전단접착강도와 관련된 Plasma Arc Curing Light의 중합효율평가

  • Kwon, Young-Chul (Department of Conservative Dentistry & Dental Research Institute, School of Dentistry, Seoul National University) ;
  • Kim, Sun-Young (Department of Conservative Dentistry & Dental Research Institute, School of Dentistry, Seoul National University) ;
  • Chung, Sae-Joon (Department of Conservative Dentistry & Dental Research Institute, School of Dentistry, Seoul National University) ;
  • Han, Young-Chul (Department of Conservative Dentistry & Dental Research Institute, School of Dentistry, Seoul National University) ;
  • Lee, In-Bog (Department of Conservative Dentistry & Dental Research Institute, School of Dentistry, Seoul National University) ;
  • Son, Ho-Hyun (Department of Conservative Dentistry & Dental Research Institute, School of Dentistry, Seoul National University) ;
  • Um, Chung-Moon (Department of Conservative Dentistry & Dental Research Institute, School of Dentistry, Seoul National University) ;
  • Cho, Byeong-Hoon (Department of Conservative Dentistry & Dental Research Institute, School of Dentistry, Seoul National University)
  • 권영철 (서울대학교 치의학전문대학원 보존학교실) ;
  • 김선영 (서울대학교 치의학전문대학원 보존학교실) ;
  • 정세준 (서울대학교 치의학전문대학원 보존학교실) ;
  • 한영철 (서울대학교 치의학전문대학원 보존학교실) ;
  • 이인복 (서울대학교 치의학전문대학원 보존학교실) ;
  • 손호현 (서울대학교 치의학전문대학원 보존학교실) ;
  • 엄정문 (서울대학교 치의학전문대학원 보존학교실) ;
  • 조병훈 (서울대학교 치의학전문대학원 보존학교실)
  • Published : 2008.05.30
Download PDF
⟨ Previous Next ⟩

Abstract

The objective of this study was to compare dentin shear bond strength (DSBS) of dentin bonding agents (DBAs) cured with a plasma arc (PAC) light curing unit (LCU) and those cured with a light emitting diode (LED) LCU. Optical properties were also analyzed for Elipar freelight 2 (3M ESPE); LED LCU, Apollo 95E (DMT Systems); PAC LCU and VIP Junior (Bisco); Halogen LCU. The DBAs used for DSBS test were Scotchbond Multipurpose (3M ESPE), Singlebond 2 (3M ESPE) and Clearfil SE Bond (Kuraray). After DSBS testing, fractured specimens were analyzed for failure modes with SEM. The total irradiance and irradiance between 450 nm and 490 nm of the LCUs were different. LED LCU showed narrow spectral distribution around its peak at 462 nm whereas PAC and Halogen LCU showed a broad spectrum. There were no significant differences in mean shear bond strength among different LCUs (P > 0.05) but were significant differences among different DBAs (P < 0.001)

광물리학적 특성 분석을 위해 Apollo 95E (DMT Systems, Orange, CA; PAC 광중합기), Elipar Freelight 2 (3M ESPE, MN, USA; LED 광중합기) 그리고 VIP Junior (Bisco, Schaumberg, IL, USA; QTH 광중합기), 3종의 광중합기의 총광강도(Total intensity)와 spectral distribution을 측정하였고 특정 파장에 해당되는 광강도 (Energy density)를 분석하였다. 상아질 전단접착강도의 측정을 위해 Scotchbond Multipurpose (3M ESPE), Single bond (3M ESPE) 그리고 Clearfil SE bond (Kuraray)가 사용되었다. Plasma Arc Curing light (Apollo 95E) 광중합기는 여러개의 최대정점을 가지며 넓은 spectral distribution과 $2307mw/cm^2$의 높은 광강도를 나타내었고, VIP Junior 광중합기는 490nm에서 최대정점을 갖는 넓은 spectral distribution을 나타내었고, Elipar Freeelight 2 광중합기는 462 nm의 최대정점 주위로 좁은 spectral distribution을 보였다. Two-Way ANOVA와 Bonferroni's multiple comparison test를 이용하여 상아질 전단접착강도를 분석한 결과, PAC 광중합기와 LED 광중합기 간에 유의성 있는 차이를 보이지 않았으며 (P > 0.05), 상아질 접착제와 광중합기의 교호관계에도 유의성이 없었다. 그러나 상아질 접착제는 상호간에 유의성 있는 차이를 보였다 (P < 0.001).

Keywords

References

  1. Craig RG, Powers JM. Restorative dental materials. 11th Ed, 2001
  2. Althoff F, Hartung M. Advances in light curing. Am J Dent 13:77D-81D, 2000
  3. Jandt KD, Mills RW, Blackwell GB, Ashworth SH. Depth of cure and compressive strength of dental composites cured with blue light emitting diode (LEDs). Dent Mater 16:41-47, 2000 https://doi.org/10.1016/S0109-5641(99)00083-4
  4. Mills RW. Blue light emitting diodes - another method of light curing? Br Dent J 178:169, Letter 1995
  5. Stahl F, Ashworth SH, Jandt KD, Mills RW. Lightemitting diode (LED) polymerisation of dental composites: flexural properties and polymerisation potential. Biomaterials 21:1379-1385, 2000 https://doi.org/10.1016/S0142-9612(00)00029-6
  6. Price RBT, Felix CA, Andreou P. Evaluation of a dual peak third generation LED curing light. Compendium 26:331-348, 2005
  7. Kim SY, Lee IB, Cho BY, Son HH, Um CM. Curing effectiveness of a light emitting diode on dentin bonding agents. J Biomed Mater Res Part B 77B:164-170, 2006 https://doi.org/10.1002/jbm.b.30426
  8. Caughman WF, Rueggeberg FA. Shedding new light on composite polymerization. Oper dent 27:636-638, 2002
  9. Christensen GJ. The light-curing mania. JADA 135:461-463, 2004 https://doi.org/10.14219/jada.archive.2004.0211
  10. Uhl A, Mills RW, Jandt KD. Polymerization and lightinduced heat of dental composites cured with LED and halogen technology. Biomaterials 24:1809-1820, 2003 https://doi.org/10.1016/S0142-9612(02)00585-9
  11. Teshmia W, Nomura Y, Tanaka N, Urabe H, Okazaki M, Nahara Y. ESR study of camphorquinone/amine photoinitiator systems using blue-light emitting diodes. Biomaterials 24:2097-2103, 2003 https://doi.org/10.1016/S0142-9612(02)00636-1
  12. Ramp LC, Broome JC, Ramp MH. Hardness and wear resistance of two resin composites cured with equivalent radiant exposure from a low irradiance LED and QTH light-curing units. Am J Dent 19:31-36, 2006
  13. Peuzfeldt A, Sahafi A, Asmussen E. Characterization of resin composites polymerized with plasma arc curing units. Dent Mater 16(5);330-336, 2000 https://doi.org/10.1016/S0109-5641(00)00025-7
  14. Park SH, Krejci I, Lutz F. Microhardness of resin composites polymerized by plasma arc or conventional visible light curing. Oper Dent 27: 30-37, 2002
  15. Lindberg A, Peuzfeldt A, Dijken JWV. Effect of power density of curing unit, exposure duration, and light guide distance on composite depth of cure. Clin Oral Invest 9:71-76, 2005 https://doi.org/10.1007/s00784-005-0312-9
  16. Lindberg A, Peuzfeldt A, Dijken JWV. Curing depths of a universal hybrid and a flowable resin composite cured with quartz tungsten halogen and light-emitting diode units. Acta Odontol Scand 62:97-101, 2004 https://doi.org/10.1080/00016350410006905
  17. Sudsangiam S, Van Noort R. Do dentin bond strength tests serve a useful purpose? J Adhes Dent 1:57-67, 1999
  18. Van Noort R, Cardew GE, Howard IC. A study of the interfacial shear and tensile stresses in a restored molar tooth. J Dent 16:286-293, 1988 https://doi.org/10.1016/0300-5712(88)90129-7
  19. Van Noort R, Noroozi S, Howard IC, Cardew G. A critique of bond strength measurements. J Dent 17:61-67, 1989 https://doi.org/10.1016/0300-5712(89)90131-0
  20. Versluis A, Tantbirojin, Douglas WH. Why do shear bond tests pull out dentin? J Dent Res 76:1298-1307, 1997 https://doi.org/10.1177/00220345970760061001
  21. Dickens SH, Milos MF. Relationship of dentin shear bond strengths to different laboratory test designs. Am J Dent 15:185-192, 2002

Cited by

  1. Temperature changes under demineralized dentin during polymerization of three resin-based restorative materials using QTH and LED units vol.39, pp.3, 2014, https://doi.org/10.5395/rde.2014.39.3.155