DOI QR코드

DOI QR Code

Microstructures and Proton Conductivities of BaZrO3 Modified by BaCeO3

BaCeO3가 첨가된 BaZrO3의 미세구조 및 수소이온 전도도

  • Park, Jong-Sung (Center for Energy Materials Research, Korea Institute of Science and Technology) ;
  • Lee, Sung-Myung (Center for Energy Materials Research, Korea Institute of Science and Technology) ;
  • Kim, Dong-Wan (Nano-material Research Center, Nano Science Research Division, Korea Institute of Science and Technology) ;
  • Lee, Jong-Ho (Center for Energy Materials Research, Korea Institute of Science and Technology) ;
  • Lee, Hae-Won (Center for Energy Materials Research, Korea Institute of Science and Technology) ;
  • Choi, Heon-Jin (Department of Ceramic Engineering, Yonsei University) ;
  • Kim, Byung-Kook (Center for Energy Materials Research, Korea Institute of Science and Technology)
  • 박종성 (한국과학기술연구원 에너지재료연구단) ;
  • 이성명 (한국과학기술연구원 에너지재료연구단) ;
  • 김동완 (한국과학기술연구원 나노재료과학본부 나노재료연구센터) ;
  • 이종호 (한국과학기술연구원 에너지재료연구단) ;
  • 이해원 (한국과학기술연구원 에너지재료연구단) ;
  • 최헌진 (연세대학교 세라믹공학과) ;
  • 김병국 (한국과학기술연구원 에너지재료연구단)
  • Published : 2008.04.30

Abstract

The dense sintered bodies with >95% theoretical densities were successfully obtained from the $BaZrO_3,\;BaCeO_3,\;Ba(Zr_{0.7}Ce_{0.3})O_3$ solid solution, and core-shell structured $0.7BaZrO_3-0.3BaCeO_3$ composite powders prepared by sol-gel methods. The activation energy of $Ba(Zr_{0.7}Ce_{0.3})O_3$ solid solution calculated from the Arrhenius plot of the proton conductivities was similar to that of $BaZrO_3$. The activation energy of core-shell structured $0.7BaZrO_3-0.3BaCeO_3$ composite, however, was much lower than that of $BaZrO_3$ or $Ba(Zr_{0.7}Ce_{0.3})O_3$ solid solution, and was very similar to that $BaCeO_3$. These results could be assigned to the Ce-rich grain boundary which was clearly observed by EDX in core-shell structured $0.7BaZrO_3-0.3BaCeO_3$ composite.

Keywords

References

  1. H. Iwahara, Y. Asakura, K. Katahira, and M. Tanaka, "Prospect of Hydrogen Technology using Proton-conducting Ceramics," Solid State Ionics, 168 299-310 (2004). https://doi.org/10.1016/j.ssi.2003.03.001
  2. H. Iwahara, T. Esaka, H. Uchida, and N. Maeda, "Proton Conducting in Sintered Oxides and Its Application to Steam Electrolysis for Hydrogen Production," Solid State Ionics, 3- 4, 359-63 (1981). https://doi.org/10.1016/0167-2738(81)90113-2
  3. K. D. Kreuer, "Proton Conductivity: Materials and Applications," Chem. Mater., 8 610-41 (1996). https://doi.org/10.1021/cm950192a
  4. K. D. Kreuer, "On the Development of Proton Conducting Materials for Technological Applications," Solid State Ionics, 97 1-15 (1997). https://doi.org/10.1016/S0167-2738(97)00082-9
  5. K. D. Kreuer, "Proton Conducting Oxides," Annu. Rev. Mater. Research, 33 333-59 (2003). https://doi.org/10.1146/annurev.matsci.33.022802.091825
  6. C. D. Savaniu, J. C.-Vazquez, and J. T. S. Irvine, "Investigation of Proton Conuducting $BaZr_{0.9}Y_{0.1}O_{2.95}:BaCe_{0.9}Y_{0.1}O_{2.95}$ Core-Shell Structures," J. Mater. Chem., 15 598-604 (2005). https://doi.org/10.1039/b410958a
  7. G. N. Glavee, R. D. Hunt, and M. Paranthaman., "Low Temperature Preparation of $BaCeO_3$ and $Ce_{0.75}Zr_{0.25}O_2$ Thin Films using Sol-Gel Processing Techniques," Mater. Res. Bull., 34 817-25 (1999). https://doi.org/10.1016/S0025-5408(99)00061-6
  8. M. Paranthaman, S. S. Shoup, D. B. Beach, R. K. Williams, and E. D. Specht, "Epitaxial Growth of $BaZrO_3$ Films on Single Crystal Oxide Substrates using Sol-Gel Alkoxide Precursors," Mater. Res. Bull, 32 1697-704 (1997). https://doi.org/10.1016/S0025-5408(97)00159-1
  9. A. L. Samgin, "A Statistical Theory of the Isotope Effect in Proton Conducting Oxides," Solid State Ionics, 176 1837-44 (2005). https://doi.org/10.1016/j.ssi.2005.05.007