References
- Lho, T. J., Kim, J. Y., Kang, D. J., Kim, J. H. and Kim, K. I., "A Study on Development of Automobile Interior Parts using Al-Inserted Injection Molding Process," KSPE Fall Conference, p. 54, 2005
- Kim, K. S., Lho, T. J., Oh, Y. J., Jeong, H. S. and Kim, K. I., "A Study on Al-Inserted Injection Molding Analysis using Moldflow," KSPE Fall Conference, pp. 275-276, 2006
- Kim, Y. S., "A Study of Shrinkage Phenomena on Injection Molded Pa Metal Insert," J. of Korean Society of Automotive Engineers, Vol. 7, No. 8, pp. 112-118, 1999
- Lyu, M. R., Seo Y. B., Mun, B. J. and Park, H. S., "Shoe Moulds Runner Shape Optimization using Moldflow," KSPE Spring Conference, pp. 1483-1486, 2003
- Kim, J. H., Kim, J. K., Song, J. I. and Kim, S. T., "Injection molding process Optimization using Moldflow and Taguchi method," KSPE Fall Conference, p. 49, 2003
- Han, K. T., Goo, Y., Kim, B. T., Jeong, Y. D. and Han, S. R., "A Study on the Filling Imbalance in a Geometrically Balanced Injection Mold," J. of Korean Society of Marine Engineers, Vol. 28, No. 6, pp. 931-937, 2004
- Kim, B. H., Jang, W. J., Kim, J. H., Chung J. W., Park Y. H. and Choe, S. J., "Optimization Condition for Injection Molding of TV Speaker Grille Using CAE," Polymer, Vol. 25, No. 6, pp. 855-865, 2001 https://doi.org/10.1016/0032-3861(84)90018-1
- Ha, Y. W., Chong, T. H. and Lee, B. J., "Injection Molding of Polyetherimide Axi-Symmetric Elements," Trans. of Korean society of machine tool engineer, Vol. 11, No. 6, pp. 68-74, 2002
- Kim, J. M. and Lyu, M. Y., "An Application of CAE in the Optimization of Runner Size in Injection Molding," J. of the Korean society for Technology of Plastics," Vol. 15, No. 5, pp. 347-353, 2006 https://doi.org/10.5228/KSPP.2006.15.5.347
- Shokri, P. and Bhatnagar, N., "Effect of packing pressure on fiber orientation in injection molding of fiber-reinforced thermoplastics," Society of Plastics Engineers, Vol. 28, No. 2, pp. 214-223, 2007
- Imiherri, S. S. S., Sapueu, S. M., Sulaiman, S., Hamdan, M. M., Zainnddin, E. S., Osmau. M. R. and Rahmau, M. Z. A., "Mould flow and component design analysis of polymeric based composite automotive clutch pedals," J. of materials processing technology, Vol. 171, No. 3, pp. 358-365, 2006 https://doi.org/10.1016/j.jmatprotec.2005.06.077
- Lam, Y. C., Britton, G. A. and Deng, Y. M., "A computer-aided system for an optimal molding conditions design using a simulation-based approach," Int. J. of advanced manufacturing technology, Vol. 22, No. 7, pp. 574-586, 2003 https://doi.org/10.1007/s00170-003-1558-5
- Cox, H. W., Mentzer, C. C. and Custer, R. C., "Flow of thermoplastic melts: experimental and predicted," Polymer engineering and science, Vol. 24, No. 7, pp. 501-510, 1984 https://doi.org/10.1002/pen.760240709
- Choi, Y., Yeo, H. T., Park, J. H., Kang, M. G., Oh, K. H. and Park, S. W., "Press Forming of Extruded Aluminum Profile for Automotive Parts," J. of the Korean Society of Precision Engineering, Vol. 23, No. 5, pp. 52-58, 2006
- Bae, W. B., Kim, Y. H., Lee, Y. S. and Kim, M. S., "The Basic Study on the Casting/ Forging Technology of Aluminum Alloy," KSPE Spring Conference, pp. 85-88, 1998
- Ahn, D. G. and Kim, D. W., "Selection of Gate location of Injection Mould for Automotive Floor Console Using Injection Molding Analysis," KSPE Spring Conference, pp. 449-450, 2007