Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

An Optimal Design of Sandwich Panels with Wire-woven Bulk Kagome Cores

와이어 직조 카고메 다공질 금속을 심재로 갖는 샌드위치 판재의 최적 설계

  • 이용현 (POSCO 광양제철소 도금부) ;
  • 강기주 (전남대학교 기계시스템공학부)
  • Published : 2008.09.01
Download PDF
⟨ Previous Next ⟩

Abstract

First, the effect of the geometry such as the curved shape of the struts composing the truss structure of WBK is elaborated. Then, analytic solutions for the material properties of WBK and the maximum loads of a WBK-cored sandwich panel under bending are derived. A design optimization with the face sheet thickness and the core height selected as the design variables is presented for given slenderness ratios of the WBK core. Unless the face sheet thickness is limited, the optimal design to give the maximum load per weight is always found at a confluence of three failure modes, namely, face sheet yielding, indentation plastic, and core shear modeB plastic.

Keywords

References

  1. Zok, F.W., Waltner, S.A., Wei, Z., Rathbun, H.J., McMeeking, R.M. and Evans, A.G., 2004, “A Protocol for Characterizing the Structural Performance of Metallic Sandwich panels: Application to Pyramidal Truss Cores,” International J. of Solids and Structures, Vol. 41, pp. 6249-6271 https://doi.org/10.1016/j.ijsolstr.2004.05.045
  2. Chiras, S., Mumm, D.R., Wicks, N., Evans, A.G., Hutchinson, J.W., Dharamasena, K. Wadley, H.N.G. and Fichter, S., 2002, “The Structural Performance of Near-Optimized Truss Core Panels,” International J. of Solids and Structures, Vol. 39, pp. 4093-4115 https://doi.org/10.1016/S0020-7683(02)00241-X
  3. Wallach, J.C. and Gibson, L.J., 2001, “Mechanical Behavior of a Three-Dimensional Truss Materials,” International J. of Solids and Structures, Vol. 38, pp. 7181-7196 https://doi.org/10.1016/S0020-7683(00)00400-5
  4. Sypeck, D.J. and Wadley, H.N.G., 2001, “Multifunctional Microtruss Laminates: Textile Synthesis and Properties,” J. Mater. Res., Vol. 16, pp. 890-897 https://doi.org/10.1557/JMR.2001.0117
  5. Hyun, S., Karlsson, A. M., Torquato, S. and Evans, A. G., 2003, “Simulated Properties of Kagome and Tetragonal Truss Core Panel,” Int. J. Solids and Structures, Vol. 40, pp. 6989-6998 https://doi.org/10.1016/S0020-7683(03)00350-0
  6. Kang, K.J. and Lee, Y. H., 2005, “Three-Dimensional Cellular Light Structures Rirectly Woven by Continuous Wires and the Manufacturing Method of the Same,” US Patent Pending (Application 10/578,421)
  7. Lee, Y.H., Lee, B.K., Jeon, I. and Kang, K.J., 2007, “Wire-Woven Bulk Kagome (WBK) Truss Cores,” Acta Materialia, Vol. 55, pp. 6039-6400 https://doi.org/10.1016/j.actamat.2007.07.023
  8. Ashby, M.F., Evans, A.G., Fleck, N.A., Gibson, L.J., Hutchison, J.W., and Wadley, H.N.G., 2000, Metal Foams: A Design Guide, Butterworth Heinemann
  9. Hyun, S., Choi, J.E. and Kang, K.J., 2007, “Effect of Imperfection on the Mechanical Behavior of Wire-Woven Bulk Kagome Truss PCMs Under Shear Loading,” Proceedings of MetFOAM
  10. Hyun, S., Choi, J.E. and Kang, K.J., 2007, “Effects of Imperfections on the Mechanical Behaviors of a Wire-Woven Bulk Kagome Cellular Metal Subjected to Compression,” Submitted to Mechanics of Materials
  11. Choi, J.E., Lee, S.C. and Kang, K.J., 2008, “Effect of Wire Diameter to Pitch Ratio on Mechanical Behavior of Wire-Woven Bulk Kagome Truss PCMs Under Compression,” Proceedings of Annual Spring Meeting Korean Society of Mechanical Engineers
  12. Lee, Y.H., Choi, J.E., Jeon, I. and Kang, K.J., 2007. “A New Method to Fabricate Bulk PCMs from Continuous Wires and the Mechanical Behaviors,” Trans. of the KSME(A), Vol. 31, pp. 245-252 https://doi.org/10.3795/KSME-A.2007.31.2.245
  13. Wicks, N. and Hutchinson, J. W., 2001, “Optimal Truss Plates,” International Journal of Solids and Structures, Vol. 38, pp. 5165-5183 https://doi.org/10.1016/S0020-7683(00)00315-2
  14. Lee, Y.H., 2007, “Mechanical Behaviors of Bulk Kagome Truss PCMs Woven of Metal Wires,” Master Thesis, Chonnam National University, Korea

Cited by

  1. Finite Element Simulation of Behavior of WBK Cored Sandwich Panels Subjected to Bending Loads vol.33, pp.4, 2009, https://doi.org/10.3795/KSME-A.2009.33.4.353