Korean Journal of Computational Design and Engineering (한국CDE학회논문집)

Society for Computational Design and Engineering (한국CDE학회)
권호 표지

Standardization of an Integrated Application Resource of STEP for the Exchange of Procedurally Represented 2D CAD Models

절차적으로 표현된 2D CAD 모델 교환을 위한 STEP 통합 응용 자원의 표준화

  • Published : 2008.04.30
Download PDF
⟨ Previous Next ⟩

Abstract

ISO 10303-112 is an integrated application resource of ISO 10303, commonly known as STEP, and specifies the procedural_sketch schema. The ISO 10303-112 provides general resources for the representation of modeling commands for the exchange of procedurally represented 2D CAD models. Procedural models have the advantage of being easy to edit, simply by changing values of parameters of their constructional operations. Such models are said to embody design intent, in the sense that modifications to them conform to the method of creation used by their original creator, and they also comply with any constraints implied by the particular constructional operations used. This paper introduces the development and standardization process of the ISO 10303-112, and describes the concept of procedural 2D CAD modeling, the way to represent the procedural 2D CAD models in STEP and the harmonization with other STEP resources.

Keywords

References

  1. Owen, J., STEP: An Introduction, 2ed., Information Geometers, Jul. 1997
  2. ISO, "ISO 10303-203:1994, Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 203: Application Protocol: Configuration Controlled 3D Designs of Mechanical Parts and Assemblies", Geneva, Switzerland: International Organization for Standardization (ISO): 1994
  3. ISO, "ISO 10303-112:2006, Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 112: Integrated Application Resource: Modelling Commands for the Exchange of Procedurally Represented 2D CAD Models", Geneva, Switzerland: International Organization for Standardization (ISO): 2006
  4. Pratt, M. J. and Anderson, B. D., "A Shape Modelling Applications Programming Interface for the STEP Standard", Computer-Aided Design, Vol. 33, No. 7, pp. 489-559, Jun. 2001 https://doi.org/10.1016/S0010-4485(01)00048-3
  5. Pratt, M. J., "Extension of ISO 10303, the STEP Standard, for the Exchange of Procedural Shape Models", Proceedings of International Conference on Shape Modeling and Applications 2004, pp.317-326
  6. Pratt, M. J., Anderson, B. D. and Ranger, T., "Towards the Standardized Exchange of Parameterized Feature-Based CAD Models", Computer-Aided Design, Vol. 37, No. 12, pp. 1251-1265, Oct. 2005 https://doi.org/10.1016/j.cad.2004.12.005
  7. ISO, "ISO 10303-55:2005, Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 55: Integrated Generic Resource: Procedural and Hybrid Representation", Geneva, Switzerland: International Organization for Standardization (ISO): 2005
  8. ISO, "ISO 10303-108:2005, Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 108: Integrated Application Resource: Parameterization and Constraints for Explicit Geometric Product Models", Geneva, Switzerland: International Organization for Standardization (ISO): 2005
  9. Pratt, M. J., "A New ISO 10303 (STEP) Resource for Modeling Parameterization and Constraints", Journal of Computing and Information Science in Engineering, Vol. 4, No. 4, pp. 339-351, Dec. 2004 https://doi.org/10.1115/1.1814383
  10. ISO, "ISO 10303-109:2004, Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 109: Integrated Application Resource: Kinematic and Geometric Constraints for Assembly Models", Geneva, Switzerland: International Organization for Standardization (ISO): 2004
  11. ISO, "ISO 10303-111:2007, Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 111: Integrated Application Resource: Elements for the Procedural Modelling of Solid Shapes", Geneva, Switzerland: International Organization for Standardization (ISO): 2007
  12. ISO, "ISO 10303-201:1994, Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 201: Application Protocol: Explicit Draughting", Geneva, Switzerland: International Organization for Standardization (ISO): 1994
  13. ISO, "ISO 10303-202:1996, Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 202: Application Protocol: Associative Draughting", Geneva, Switzerland: International Organization for Standardization (ISO): 1996
  14. ISO, "ISO 10303-42:2003, Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 42: Integrated Generic Resource: Geometric and Topological Representation", Geneva, Switzerland: International Organization for Standardization (ISO): 2003
  15. Stiteler, M., "Construction History and ParametricS: Improving Affordability through Intelligent CAD Data Exchange", CHAPS Program Final Report, Advanced Technology Institute, 2004
  16. 문두환, 한순흥, "매크로 파라메트릭 방법론을 이용한 CAD모델의 교환", 한국CAD/CAM학회 논문집, 제6권, 제4호, pp. 254-262, 2001년 12월
  17. Choi, G., Mun, D. and Han, S., "Exchange of CAD Part Models Based on the Macro-Parametric Approach", International Journal of CAD/CAM (www.ijcc.org), Vol. 2, No. 1, pp.13-21, 2002
  18. Mun, D., Han, S., Kim, J. and Oh, Y., "A Set of Standard Modeling Commands for the History-Based Parametric Approach", Computer-Aided Design, Vol. 35, No. 13, pp. 1171-1179, Nov. 2003 https://doi.org/10.1016/S0010-4485(03)00022-8
  19. Hoffmann, C. M. and Juan, R., "Erep - An Editable, High-Level Representation for Geometric Design and Analysis", Proceedings of the IFIP TC5/WG5.2 Working Conference on Geometric Modeling for Product Realization, pp. 129-164, 1992
  20. Rappoport, A., "An Architecture for Universal CAD Data Exchange", Proceedings of ACM Symposium on Solid Modeling and Applications 2003, pp. 266- 269, 2003
  21. CAM-I, Application Interface Specification (AIS) 2.0, Technical Report, R-90-PM-03, May, 1991
  22. ISO, "ISO 13584-31:1999, Industrial Automation Systems and Integration - Parts Library - Part 31: Implementation Resources: Geometric Programming Interface", Geneva, Switzerland: International Organization for Standardization (ISO): 1999
  23. OMG, Computer Aided Design Services Specification V1.2 (Homepage: http://www.omg.org/technology/ documents/formal/cad.htm), Jan., 2005
  24. Pratt, M. J., "Extension of the Standard ISO10303 (STEP) for the Exchange of Parametric and Variational CAD Models", Proceedings of the Tenth International IFIP WG 5.2/5.3 Conference PROLAMAT98, Sep. 1998
  25. Schnitger, M., "Implementing Intelligent P&IDs at Rayong Olefins and Lyondell Chemical Company", Daratech Best Practices (homepage: http:// www.daratech.com/), Mar. 2004
  26. SC4 Secretariat, SC4 Organization Handbook, ISO/TC184/SC4 N 2053, 2006
  27. Schenck, D. A. and Wilson, P. R, Information Modeling the EXPRESS Way, Oxford University Press, Jun. 1997
  28. Kripac, J., "A Mechanism for Persistently Naming Topological Entities in History-Based Parametric Solid Models", Computer-Aided Design, Vol. 29, No. 2, pp. 113-122, Feb. 1997 https://doi.org/10.1016/S0010-4485(96)00040-1
  29. Mun, D. and Han, S., "Identification of Topological Entities and Naming Mapping for Parametric CAD Model Exchanges", International Journal of CAD/CAM (www.ijcc.org), Vol. 5, No. 1, pp. 69-82, Dec. 2005