Logicality Estimate for Domestic the Periodic Replacement Criteria of CWR based on Accumulated Passing Tonnage

누적통과톤수에 의한 국내 레일교체기준의 타당성 평가

  • 박용걸 (서울산업대학교 철도전문대학원 철도건설공학과) ;
  • 서상교 (서울산업대학교 철도전문대학원 철도건설공학과, 한국철도시설공단 건설본부) ;
  • 최정열 (서울산업대학교 철도전문대학원 뉴레일연구소)
  • Published : 2008.06.30

Abstract

This study is objected by presenting preliminary data to revise the periodic replacement criteria of continuous welded rail (CWR) in using. In this study, it is investigated information resources for foreign standards, the cause and types of damage in welded rails and the track maintenance history of Seoul metro to analysis the correlation between rail failure and accumulated passing tonnage. Also, it is performed bending test for the laid welded rail reaching the periodic replacement criteria. In result, the correlation between rail failure and accumulated passing tonnage is not obvious and it is a lot of cases for the construction error of welded rail. Also, as a result of bending test of laid welded rail, according to reducing about $17{\sim}18%$ the bending fracture strength of rail, the laid welded rail reaching the periodic replacement criteria is well enough ensured for the load carrying capacity of rail.

본 논문은 누적통과톤수에 의한 레일교체기준 개정을 위한 기초 데이터를 제시하는데 목적이 있다. 본 연구에서는 국외의 누적통과톤수에 의한 레일교체기준의 산정근거를 조사하였으며, 일본에서 조사된 레일용접부 결합유형 및 원인과 국내 철도운영기관인 서울메트로의 궤도유지관리이력을 조사하여 실제 레일절손과 누적통과톤수의 상관관계를 분석하였다. 또한, 누적통과톤수 기준치에 도래한 노후레일 용접부를 현장에서 발췌하여 레일용접부 휨시험을 수행하였다. 그 결과, 누적통과톤수와 레일절손간의 상관관계는 뚜렷하지 않았으며 레일용접부의 시공불량에 의한 절손사례가 많은 것으로 분석되었다. 또한, 노후레일휨시험 결과 신규레일용접부에 비해 파괴강도가 $17{\sim}18%$만이 저하된 것으로 나타나 레안교체기준에 도래한 노후레일은 사용성 측면에서 충분한 내구성 및 내하력을 확보하고 있는 것으로 분석되었다.

Keywords

References

  1. 양신추 외 2인(2001), "레일용접부의 피로수명 예측", 대한토목학회 논문집, 제20권 제1-D호, pp97-105
  2. Ska Kouzi, Kusuda Masayuki, Maeda Hiroaki(2002), "레일수명 연장에 관해", 일본철도시설협회지
  3. 이종득(2006), "철도공학", 노해출판사
  4. 서사범(2006), "선로공학(개정2판)", 얼과 알
  5. 양신추(1998), "레일용접부의 특성에 관한 연구", 철도청
  6. Coenraad Esveld (2001), "Modern Railway Track," MRT-Productions
  7. Tadashi Deshimaru, Hiroo Kataoka (2006), "Estimation of Service Life of Aged Continuous Welded Rail", QR of RTRI, Vol. 47, No. 4
  8. Hideki Shitara, Yoshihira Terashita, Mitumasa Tatsumi, Yasuto Fukada (2003), "Nondestructive Testing and Evaluation Methods for Rail Welds in Japan", QR of RTRI, Vol. 44, No. 2, pp. 53-58 https://doi.org/10.2219/rtriqr.44.53
  9. Yoshihiro Terashita, Mitsumass Tatsumi (2003), "Analysis of Damaged Rail Weld", QR of RTRI, Vol. 44, No. 2, pp. 59-64 https://doi.org/10.2219/rtriqr.44.59
  10. 일본JR, "궤도정비규칙"
  11. 서울메트로, 부산지하철공사, 대구지하철공사, 인천지하철공사, 대전지하철공사, "선로정비규정"
  12. 서울메트로, "선로검사내규", "궤도유지관리이력"
  13. 서울산업대학교 철도전문대학원 뉴레일연구소(2007), "노후레일의 교체주기 산정을 위한 연구보고서"