Abstract
Flood forecasting is a very important tool as one of nonstructural measures for reduction of flood damages in life and property and its accuracy is also an important factor. However, when we apply the Storage Function Model(SFM) which is mainly used for the flood forecasting system in Korea, the determination of the parameters is very important but it is difficult. So, the parameters have been calibrated by using an empirical formulas and judgement of hydrologist. Hence, in this study we perform the sensitivity analysis to understand the parameter characteristics and establish the ranges of parameters of the SFM. Also we do the parameter calibration by using the optimization techniques and objective functions, and evaluate their performances. Especially, we suggest a method to determine proper parameters by using a objective function which can be obtained from flood events. So, we use the suggested method for parameter estimation and compare the estimated parameters with the previously reported parameters. As a result of the application, the estimated parameters by the suggested method showed better than them from the previously reported parameters.
홍수예보는 홍수로 인한 인명과 재산피해를 저감하기 위한 비구조적 대책으로 그 정확성은 매우 중요한 요소이다. 그러나 우리나라 홍수예보에서 주로 쓰이는 저류함수모형은 그 적용에 있어서 매개변수의 결정이 매우 중요하지만 이를 결정하는 것은 매우 어렵다. 그래서 현재에는 주로 경험식을 이용하거나 수문 기술자의 판단에 의해 보정이 이루어지고 있는 실정이다. 이에 본 연구에서는 저류함수모형 매개변수의 특성을 알고 범위를 설정하기 위해서 민감도 분석을 수행하였으며, 보정을 위해 다양한 보정방법과 목적함수를 적용하여 그 성능을 평가하였다. 또한 유역에 맞는 매개변수를 결정하기 위한 방법을 제시하고, 결정된 매개변수를 이용하여 검증홍수사상에 대해 검증을 수행하였다. 본 연구의 결과와 기존에 제시된 매개변수를 사용한 결과를 비교하였다. 기존에 제시된 대상유역의 저류함수모형 매개변수도 좋은 결과를 나타내었으나, 새롭게 추정된 매개변수는 보다 더 좋은 결과를 도출하였다.