Benefit/Cost Analysis of Form Work Methods for Composite Basement Wall in Building Constructions

건축물의 합성 지하옹벽 거푸집에 대한 편익·비용 분석 연구

  • 김재엽 (충주대학교 건축공학과) ;
  • 김광희 (목포대학교 건설공학부 건축공학전공) ;
  • 안성훈 (고려대학교 건축공학과) ;
  • 이지영 (충주대학교 산업대학원)
  • Published : 2008.02.28

Abstract

This study surveys the types of form works used for constructing composite basement walls found in domestic construction sites. Based on expert surveys, the research provides criteria for selecting a form work type and cost-benefit analysis for different types of form works. In selecting a form work type, safety was considered the most important factor. It is induced from the survey that a successful construction requires a form work type that could solidly bear the lateral pressure of concrete rather than other types that cut back the cost and shorten the construction period. In the cost-benefit analysis, the benefit was the highest in 'euro-form+soldier system', and the cost was most competent in 'rib-lath+soldier system'. In considering benefit and cost together, 'euro-form+soldier system' was judged to be the best option. This is likely to be attributed to the following reasons: site workers are familiar with euro-forms because it is the most widely used; and, soldier system is more reliable in bearing lateral pressure compared to steel pipes.

Keywords

References

  1. 김광희 외(2003), 초고층 골조공사를 위한 유닛 테이블 거푸집공법의 개발 및 적용에 관한 연구, 대한건축학회논문집 구조계, p.p. 181-188
  2. 김동완 외(2005), 벽식구조 건축물의 공기단축을 위한 거푸집시스템, 대한건축학회 학술발표대회 논문집, 25권 1호, p.p. 205-208
  3. 김성근 외(2006), 초고층 건축공사 바닥 거푸집 선정을 위한 의사결정지원시스템, 대한건축학회 구조계, 20(11), p.p.207-214
  4. 김준호(2006), 공기단축을 위한 시스템 폼의 현장 적용성 평가, 대한건축학회 학술발표대회 논문집 구조계, 26권 1호, p.p. 437-440
  5. 김태훈 외(2006), 다중판별분석을 통한 초고층 바닥판 거푸집 산정 모델, 대한건축학회 학술발표대회 논문집 구조계, 26권 1호, p.p. 597-600
  6. 삼성중공업(2001), 한양대학교, CBS공법의 개발 및 성능평가에 관한 연구, p.p. 13-31
  7. 신윤석 외(2006), 초고층 건축공사의 바닥판 거푸집시스템 선정에 관한 연구, 대한건축학회 구조계, 22(2), p.p147-154
  8. 오승준 외(2003), 사전검토단계에서 제한조건 분석에 의한 지하 합성벽 공법의 현장 적용성 평가에 관한 연구, 대한건축학회 구조계, 19(3), p.p. 115-122
  9. 이창남(1998), 건축구조 뿌리에서 새순까지 I, 기문당, p 57
  10. 장지선 외(2005), 국내 초고층 거푸집 공사기간에 영향을 미치는 주요요인 평가, 대한건축학회 학술발표대회 논문집, 구조계, 25권 1호, p.p. 281-284
  11. 정경진 외(2004), 지하공사 지식기반 적정공법 선정을 위한 프로세스에 관한 연구, 대한건축학회 학술발표논문집, 24(2), p.p.639-642
  12. 정상진외(2004), 리브라스 거푸집의 적용을 위한 실험적 연구, 한국건축시공학회논문집, p. 103
  13. 조근태외(2003), 앞서가는 리더들의 계층분석적 의사결정, 동현출판사, p.p. 115-130
  14. Elazouni, A. M., Ali, A. F., Abdel-Razek, R. H.(2005), Estimating the Acceptability of New Formwork Systems Using Neural Networks, Journal of Construction Engineering and Management, 131(1), p.p. 33-41 https://doi.org/10.1061/(ASCE)0733-9364(2005)131:1(33)
  15. Hanna, A. S., Willenbrock, J. H., Sanvido, V. E.(1992), Knowledge Acquisition and Development for Formwork Selection System, Journal of Construction Engineering and management, 118(1), p.p. 179-198 https://doi.org/10.1061/(ASCE)0733-9364(1992)118:1(179)