Study on Losses Segregation for Capacitor-Run Single Phase Induction Motor

커패시터 구동형 단상유도전동기의 손실분리에 대한 연구

  • 김광수 (한양대학 대학원 전기공학과) ;
  • 김기찬 (한양대학 대학원 전기공학과) ;
  • 이성구 (한양대학 대학원 전기공학과) ;
  • 고성철 (한양대학 대학원 전기공학과) ;
  • 전연도 (한국전기연구원) ;
  • 이철규 ((주)SPG) ;
  • 이주 (한양대학 전기제어생체공학부과)
  • Published : 2008.09.01

Abstract

This paper is concerned with the problems of accurate losses segregation in capacitor-run single phase motor. Segregation of losses in single phase induction motor is more complicated than that in three phase induction motor, because of the backward magnetic field component in the motor. Generally there are two methods for losses segregation of single phase induction motor. The one is relatively complicated method based on parameter estimation of single phase induction motor. By the way, the other one is simplified method based on IEEE Standard 114. All of the methods for the experimental determination of single phase induction motor losses are studied in this paper. Since the IEEE Standard is not possible to be applied for all type of single phase induction motors, we modified that method to apply for losses segregation of capacitor-run single phase induction motor as unifying the method based on parameter estimation.

Keywords

References

  1. "IEEE Standard Test Procedure for Polyphase Induction Motors and Generators,". Standard 112-2004, Sponsored by the Rotating Machinery Committee of the IEEE Power Engineering Society, Revised in 2004
  2. "IEEE standard test procedure for single-phase induction motors,". Standard 114-2002, Sponsored by the Rotating Machinery Committee of the IEEE Power Engineering Society, Revised in 2002
  3. "Energy Efficiency Test Methods for Single- and Three-Phase Small motor" Standard CAN/CSC-C747094, A National Standard of Canada, Reaffirmed 2005
  4. Cyril G. Veinott ; "Theory and design of small induction motors", MaGraw-Hill Book Company, 1959
  5. Ion Boldea, Syed A. Nasar " The induction machine handbook", CRC Press, 2001
  6. Collins, E.R., Jr.; Boyd, P.B.; Smith, A.O.; "Improved methods for determining the equivalent circuit parameters" Industry Applications Society Annual Meeting, Page(s):390 - 397 vol.1, 1993