Journal of the Korean Society of Safety (한국안전학회지)

The Korean Society of Safety (한국안전학회)
권호 표지

The Effects of Reinforcing in Concrete Crack by AIG Method

Auto Injector Grouting을 이용한 콘크리트 균열 보강효과

  • Oh, Se-Wook (Department of Civil Engineering, a College of Science and Engineering, Kyungpook University) ;
  • Youn, Il-Ro (Department of Civil Engineering, a College of Science and Engineering, Kyungpook University) ;
  • Cho, Hong-Dong (Direct of Ciber Solution Co.)
  • 오세욱 (경북대학교 이공대학 토목공학과) ;
  • 윤일로 (경북대학교 이공대학 토목공학과) ;
  • 조홍동 (큐버 솔루션)
  • Published : 2008.08.31
Download PDF
⟨ Previous Next ⟩

Abstract

Auto injector grouting method as low pressure injected by using epoxy and Boyle's law is very excellent method in economical efficiency and construction work because injected process can be dealt with collectively. For estimation of filling capacity purpose of this study compared the Auto injector method with the piston injector method. In this study, the tests allow for width of crack, injected angle of epoxy resin and injected method were performed using concrete block specimen making artificial crack. The results of test, tilling et1iciency of epoxy by Auto Injector grouting method verify to better than the piston injector method and uniaxial strength increased about 11% than standard specimen.

Keywords

References

  1. 金鎭根, "콘크리트 균열의 원인", 한국콘크리트학회 학회지 제6권4호, pp. 6-16, 1994.8
  2. 추영수 역, "콘크리트의 균열조사", 보수.보강지침, 건설도서, pp. 29-106, 1996
  3. 최재진, "콘크리트 품질문제의 유형과 대책", 한국레미콘공업협회, pp. 6-16, 1988
  4. 김우, "세계 여러나라 콘크리트시방서의 균열제한에 대한 규정", 콘크리트학회지, 제6권 4호, pp. 30-36, 1994.8
  5. ACI Committee 224, "Control of Cracking in Concrete Structures", ACI Manual, pp. 140-148, 1988
  6. ACI Committee 318, "Building Code Requirements for Reinforced Concrete", ACI Manual, pp. 515-526, 1989
  7. PCA, "Note on ACI", 318-95, pp. 69-80, 1996
  8. G. S. Springer, B. A. Sanders and R. W. Tung, "Environmental Effects on Glass Fiber Reinforced Polyester and Vinylester Composites", IBID, vol. 14, pp. 213-232, 1980
  9. J. L. Christian, W. E. Witzell, and B. A. Stein, "Environmental Effects on Advanced Composite Materials", ASTM STP 602, pp. 61-69, 1976