DOI QR코드

DOI QR Code

A Frequency-Sharing Method to Use Frequency Resources Efficiently

효율적인 주파수 이용을 위한 주파수 공유 방법

  • Published : 2008.08.30

Abstract

Recently many short-range transceiver systems, such as ZigBee, Bluetooth and RFID(Radio Frequency Identification), have been developed. These systems are mostly low-power transceivers. In the near future many more low-power transceivers are appeared for WPAN(Wireless Personal Area Network) and interference mitigation technologies are necessary to the low-power transceivers for using frequency resources efficiently. In this paper we consider two methods for sharing frequency resources. The first case is that a frequency band previously assigned fer a certain system is shared and the second case is that the white frequency band is shared. We study the method and conditions for sharing frequency resources in the above two cases. When a frequency band is shared with ZigBee, RFID, DCP (Digital Cordless Phone) and Bluetooth as an example for the first case, the sharing conditions are investigated and the results are presented. We propose a balancing factor to maintain an equal transmitting conditions between systems having a different interference mitigation technique. In the interference simulation we use FH(Frequency Hopping) as a reference system and 0.9 of a balancing factor for LBT(Listen Before Talk) and 0.8 for DS(Direct Spreading). From the simulation results we know that a balancing factor reduces interference probability therefore many more systems can be operated in the same frequency bands compared with the case without using a balancing factor.

최근에 ZigBee, Bluetooth, RFID(Radio Frequency Identification)와 같은 근거 리 무선통신 시스템에 대한 연구가 활발히 진행되고 있으며, 이와 같은 시스템들은 대부분 소출력무선기기들이다. 미래에는 개인을 중심으로 하는 WPAN(Wireless Personal Area Network)을 위해서 더 많은 소출력 무선기기들이 출현할 것이며, 간섭저감기술은 소출력무선기기들이 한정된 주파수 자원을 효율적으로 이용하기 위한 필수 기술이 될 것으로 예상된다. 본 논문에서는 두 가지의 주파수를 공유 방법을 고려하였다. 첫 번째는 이미 특정 시스템에 할당된 주파수를 공유하는 경우이고, 두 번째는 새로운 주파수대역을 할당하는 경우이며, 이 두 가지 경우에 대한 효율적인 주파수 공유 방법을 연구하였다. 첫 번째 방법으로 주파수출 공유하는 경우의 한 가지 예로서 ZigBee, RPID, DCP(Digital Cordless Phone) 및 Bluetooth가 특정 주파수대역을 공유하는 경우 주파수 공유 조건을 검토하였다. 그리고 두 번째 공유 방법에서는 서로 다른 간섭저감기술을 사용하는 통신시스템에 대해서 공평한 신호 방사조건을 유지하기 위한 balancing factor의 개념을 제안하였으며, FH(Frequency Hopping) 시스템을 기준으로 하는 경우 LBT(Listen Before Talk)는 0.9, DS (Direct Spreading)은 0.8의 balancing factor를 이 용하면, 이들 간섭저감기술들 사이의 방사조건을 비슷하게 유지 할 수 있기 때문에 전체적으로 더 많은 시스템이 주파수를 공유할 수 있음을 보였다.

Keywords

References

  1. Tolga M. Duman and Ali Ghrayeb, Coding for MIMO Communication Systems, John Wiley & Sons, 2007
  2. Steve C. Cripps, Advanced Techniques in RF Power Amplifier Design, Artech House, 2002
  3. ET Docket No. 02- 135, Spectrum Policy Task Force Report, Nov. 2002
  4. IEEE Std 802.15.4b, Wireless Medium Access Control(MAC) and Physical Layer(PHY) Specifications for Low-Rate Wireless Personal Area Networks (LR-WPANs), 2005
  5. Todor Cooklev, Wireless Communication Standards : A Study of IEEE 802.11, 802.15, and 802.16, IEEE Press, 2004
  6. FCC, Part 15 - Radio Frequency Devices, Feb. 2006
  7. ERC-REC 70-03, Relating to the Use of Short Range Devices(SRD), May 2005
  8. ETSI EN 300 175-2, Digital Enhanced Cordless Telecommunications(DECT); Common Interface; Part 2- Physical Layer(PHL), 1999
  9. IEEE Std 802.15.1, Wireless Medium Access Control (MAC) and Physical Layer(PHY) Specifications for Wireless Personal Area Networks(WPANs), 2002