Journal of Ocean Engineering and Technology (한국해양공학회지)

Korean Society of Ocean Engineers (한국해양공학회)
권호 표지

A Study on Statistical Properties of Vickers Hardness of Friction Welded Parts in Alloy718 Steel (Part 1. As-welded)

Alloy718 마찰용접재의 비커스 경도의 통계적 성질에 관한 연구 (As-welded 재의 경우를 중심으로)

  • Kwon, Hyeok-Yong (Graduate Student, School of Mechanical Engineering, Pukyong National University) ;
  • Choi, Sung-Yoong (Graduate Student, School of Mechanical Engineering, Pukyong National University) ;
  • Lee, Sang-Yeal (Department of Automotive Engineering, Pohang College) ;
  • Kong, Yu-Sik (Graduate Student, School of Mechanical Engineering, Pukyong National University) ;
  • Kim, Seon-Jin (Graduate Student, School of Mechanical Engineering, Pukyong National University)
  • 권혁용 (부경대학교 기계공학부 대학원) ;
  • 최성웅 (부경대학교 기계공학부 대학원) ;
  • 이상열 (포항대학 자동차계열) ;
  • 공유식 (부경대학교 기계공학부 대학원) ;
  • 김선진 (부경대학교 기계공학부 대학원)
  • Published : 2008.10.30
Download PDF
⟨ Previous Next ⟩

Abstract

The objective of this paper is the investigation of the statistical properties of Vickers hardness (HV) of friction welded parts in nickel based super resisting steel, alloy 718 steel. First, we examine the statistical properties on the case of as-welded parts. Several Virkers indentations were made under same nominal conditions. This was repeated for three different applied loads, 100, 200 and 300g with a duration time, 10 second. The arithmetic mean of Vickers hardness in base metal (BM) materials is larger than that of HAZ in all applied loads. The measure of dispersion, that is, the coefficient of variation (COV) for BM and HAZ is decreased by increasing with the applied load. The distribution of Vickers hardness was not found to be symmetric type. The probability distribution of Vickers hardness was well followed Weibull distribution. The shape parameter and the scale parameter (characteristic hardness) are increased by increasing with the applied load, as both BM and HAZ.

Keywords

References

  1. 권상우, 공유식, 김선진 (2008). "Alloy718 마찰접합조건의 최적화와 비파괴평가", 한국해양공학회지, 제22권, 제1호, pp 53-57
  2. 재료강도확률모델연구회편 (1992). 재료강도의 통계적 성질, 양현당(일서)
  3. 안근탁랑(1969). 이론.응용 통계학, 양현당(일서)
  4. Factor, M. and Roman, I. (2000). "Vickers Microindentation of WC-12%Co Thermal Spray Coatings", Surface and Coating Technology, Vol 132, pp 181-193 https://doi.org/10.1016/S0257-8972(00)00738-6
  5. Lin, C.K. and Berned, C.C. (1995). "Statistical Analysis of Microhardness Variations in Thermal Spray Coatings", J. Material Science, Vol 30, pp 111-117 https://doi.org/10.1007/BF00352139
  6. Nelson, W. (1982). Applied Life Data Analysis, John Wiley & Sons, Inc., New York
  7. Schneider, J.M., Bigerelle, M. and Iost, A. (1999), "Statistical Analysis of the Vickers Hardness", Material Science and Engineering A262, pp 256-263
  8. Yanchev, I.Y., Trifonova, E.P., Karakotsou, Ch. Anagnostopoulos, AN. and Bleris G.L. (1995). "Analysis of Microhardness Data in TIxln1-xSe", J. Material Science, Vol 30, pp 5576-5580 https://doi.org/10.1007/BF00356689
  9. Weibull, W. (1951). "A Statistical Distribution Function of Wide Applicability", Journal of Applied Mechanics, Vol 18, pp 293-297