DOI QR코드

DOI QR Code

Influence of Deposition Method on Refractive Index of SiO2 and TiO2 Thin Films for Anti-reflective Multilayers

  • Song, Myung-Keun (Department of Materials Engineering, Korea Aerospace University) ;
  • Yang, Woo-Seok (Nano Bio-photonics Team, Korea Electronics Technology Institute) ;
  • Kwon, Soon-Woo (Department of Advanced Materials Engineering, Sungkyunkwan University) ;
  • Song, Yo-Seung (Department of Materials Engineering, Korea Aerospace University) ;
  • Cho, Nam-Ihn (Department of Electronic Engineering, Sun Moon University) ;
  • Lee, Deuk-Yong (Department of Materials Engineering, Daelim College of Technology)
  • Published : 2008.09.30

Abstract

Anti-Reflective (AR) thin film coatings of $SiO_2$ (n= 1.48) and $TiO_2$ (n=2.17) were deposited by ion-beam assisted deposition (IBAD) with End-Hall ion source and conventional electron beam (e-beam) evaporation to investigate the effect of deposition method on the refractive indicies (n) of the fIlms. Green-light generation using a GaAs laser diode was achieved via excitation of the second harmonic. The latter resulted from the transmission of the fundamental guided-mode wave of 1064 nm through periodically poled $LiNbO_3$. Large differences in the refractive indicies of each of the layers in the multilayer coating may improve AR performance. IBAD of $SiO_2$ reduced its refractive index from 1.45 to 1.34 at 1064 nm. Conversely, e-beam evaporation of $TiO_2$ increased its refractive index from 1.80 to 2.11. In addition, no fluctuations in absorption at the wavelength of 1064 nm were found. The results suggest that films prepared by different deposition methods can increase the effectiveness of multilayer AR coatings.

Keywords

References

  1. M. Nakamura, M. Kotoh, H. Taniguchi, and K. Tadatomo, "Bulk Periodically Poled MgO-doped $LiNbO_3$ by External Electric Field Application," Japanese J. Appl. Phys., 38 L512-14 (1999) https://doi.org/10.1143/JJAP.38.L512
  2. Y. Cho, S. Kazuta, and H. Ito, "Scanning-nonlinear-dielectric- microscopy Study on Periodically Poled $LiNbO_3$ for A High-performance Quasi-phase Matching Device," Appl. Phys. Lett., 79 2955-57 (2001) https://doi.org/10.1063/1.1414299
  3. L.E. Myers and W.R. Bosenberg, "Periodically Poled Lithium Niobate and Quasi-phase-matched Optical Parametric Oscillators," IEEE J. Quantum Electronics, 33 1663-72 (1997) https://doi.org/10.1109/3.631262
  4. Y. Kong, J. Xu, B. Li, S. Chen, Z. Huang, L. Zhang, S. Liu, W. Yan, H. Liu, X. Xie, L. Shi, X. Li, and G. Zhang, "The Asymmetry Between The Domain Walls of Periodically Poled Lithium Niobate Crystals," Opt. Mater., 27 471-73 (2004) https://doi.org/10.1016/j.optmat.2004.03.029
  5. B. Vincent, A. Boudrioua, R. Kremer, and P. Moretti, "Second Harmonic Generation in Helium-implanted Periodically Poled Lithium Niobate Planar Waveguides," Opt. Comm., 247 461-69 (2005) https://doi.org/10.1016/j.optcom.2004.11.079
  6. S.W. Kwon, Y.S. Song, W.S. Yang, H.M. Lee, W.K. Kim, H.Y. Lee, and D.Y. Lee, "Effect of Photoresist Grating Thickness and Pattern Open Width on Performance of Periodically Poled $LiNbO_3$ for A Quasi-phase Matching Device," Opt. Mater., 29 923-26 (2007) https://doi.org/10.1016/j.optmat.2006.02.008
  7. S.W. Kwon, Y.S. Song, W.S. Yang, H.M. Lee, W.K. Kim, H.Y. Lee, B.Y. Kim, M.H. Lee, and D.Y. Lee, "Influence of Annealing Temperature on Domain Shape of Periodically Poled $LiNbO_3$," Thin Solid Films, 515 922-26 (2006) https://doi.org/10.1016/j.tsf.2006.07.161
  8. S.W. Kwon, W.S. Yang, H.M. Lee, W.K. Kim, H.Y. Lee, Y.S. Song, M.H. Park, D.H. Yoon, B.Y. Kim, N. Cho, and D.Y. Lee, "Domain Reversal of Periodically Poled $LiNbO_3$ With A Shorter Domain Inverted Period," Thin Solid Films, 516 183-88 (2007) https://doi.org/10.1016/j.tsf.2007.06.117
  9. J. Amin, V. Pruneri, J. Webjorn, P.St.J. Russel, D.C. Hanna, and J.S. Wilkinson, "Blue Light Generation in A Periodically Poled Ti:$LiNbO_3$ Channel Waveguide," Opt. Comm., 135 41-4 (1997) https://doi.org/10.1016/S0030-4018(96)00497-X
  10. M. Gilo and N. Croitoru, "Properties of $TiO_2$ Films Prepared by Ion-assisted Deposition Using A Gridless End- Hall Ion Source," Thin Solid Films, 283 84-9 (1996) https://doi.org/10.1016/0040-6090(95)08500-9
  11. M.G. Krishna, K.N. Rao, and S. Mohan, "Optical Properties of Ion Assisted Deposited Zirconia Thin Films," J. Vac. Sci.Technol. A, 10 3451-55 (1992) https://doi.org/10.1116/1.577801
  12. S. Woo and C.K. Hwangbo, "Influence of Plasma Ion-beam Assistance on $TiO_2\;and\;MgF_2$ Thin Films Deposited by Plasma Iion-assisted Deposition," Surf. Coat. Technol., 201 8250-57 (2007) https://doi.org/10.1016/j.surfcoat.2006.01.085
  13. F. Richter, H. Kupfer, P. Schlott, T. Gessner, and C. Kaufmann, "Optical Properties and Mechanical Stress in $SiO_2/Nb_2O_5$ Multilayers," Thin Solid Films, 389 278-83 (2001) https://doi.org/10.1016/S0040-6090(01)00864-1