Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지

Fuel Oil Characteristics of Mulching Waste Vinyl by Indirect Heating Emulsion System

간접가열 유화설비에 의한 폐멀칭비닐의 연료유 특성

  • 김해지 (진주산업대학교 자동차공학과) ;
  • 김남경 (진주산업대학교 자동차공학과)
  • Received : 2009.03.04
  • Accepted : 2009.03.08
  • Published : 2009.03.30
Download PDF
⟨ Previous Next ⟩

Abstract

This paper describes the fuel oil characteristics of mulching waste vinyl by indirect heating emulsion system. For the emulsion experiment of waste vinyl, the system is composed of melting furnace, the 1th pyrolysis furnace, and the 2nd pyrolysis furnace. The mulching waste vinyl is used for the fuel oil characteristics analysis of mulching waste vinyl. The refined oil, gasoline, and diesel oil are extracted and quantified to analysis the fuel oil characteristics. From the results of experiments, it has been shown that the production of fuel oil from mulching waste vinyl is possible using the emulsion system.

Keywords

References

  1. Demirbas, A., "Pyrolysis of municipal plastic wastes for recovery of gasoline-range hydrocarbons," J. of Analytical and Applied Pyrolysis, Vol. 72, pp. 97-102, 2004. https://doi.org/10.1016/j.jaap.2004.03.001
  2. Jerzy, W.,"Engine fuel derived from waste plastics by thermal treatment," Fuel, Vol. 81, pp. 473-481, 2002. https://doi.org/10.1016/S0016-2361(01)00118-1
  3. Sakata, y., Azhar Uddin, M. and Muto, A., "Degradation of polyethylene and polypropylene into fuel oil by using solid acid and non-acid catalysts," J. of Analytical and Applied Pyrolysis, Vol. 51, No. 1-2, pp.135-155. 1999. https://doi.org/10.1016/S0165-2370(99)00013-3
  4. Andras A., Norbert, M and Laszlo, B., "Petrochemical feedstock by thermal cracking of plastic waste," J. of Analytical and Applied Pyrolysis, Vol. 79, pp. 409-414, 2007. https://doi.org/10.1016/j.jaap.2006.12.031
  5. Serrano, D. P., Aguado, J., M and Palazzi, G., "Feedstock recycling of agriculture plastic film wastes by catalytic cracking," Applied Catalysis B: Environmental, Vol. 49, pp. 257-265, 2004. https://doi.org/10.1016/j.apcatb.2003.12.014
  6. Adil, K., Bilgesu, A.Y., "Catalytic and thermal oxidative pyrolysis of LDPE in a continuous reactor system," J. of Analytical and Applied Pyrolysis, Vol. 78, pp. 7-13, 2007. https://doi.org/10.1016/j.jaap.2006.03.008
  7. Seo, Y.H., Shin, D.H., "Determination of paraffin and aromatic hydrocarbon type chemicals in liquid distillates produced from the pyrolysis process of waste plastics by isotope-dilution mass spectrometry," Fuel, Vol. 81, pp. 2103-2112, 2002. https://doi.org/10.1016/S0016-2361(02)00197-7
  8. 신대현, 윤왕래, 최익수, "폐플라스틱의 화학적 재활용과 열분해 유화기술," 고분자과학과 기술, Vol. 13, No. 3, pp.332-330, 2002.
  9. 에너지관리공단 폐기물연구회, "폐기물 에너지화 기술 - 폐기물 열분해," pp.93, 2002.
  10. 환경부, "2004 전국 폐기물 발생 및 처리현황," 2004.
  11. 이균정, "최신 제어시스템," 피어슨에듀케이션코리아, 2005.