DOI QR코드

DOI QR Code

A design of hybrid type linear motor and measurement of the thrust force characteristics

Hybrid type linear motor의 설계와 추력특성시험

  • 김문환 (신라대학교 자동차기계공학과)
  • Published : 2009.10.31

Abstract

A Hybrid type Linear Pulse Motor(LPM) for low cost is designed as single side stator structure. The static and dynamic characteristics measurement systems are designed. Experimental measurement systems, which measure the static and dynamic characteristic of the LPM, are uggested for the prototype LPM. It becomes known the values of the thrust forces. Finally the microstep drive method is adopted to the drive of prototype LPM. The waveform difference is measured between the microstep method and rectangular wave. From the experimental results, it can be confirmed that the repetitive ripple of the thrust force of the prototype LPM are reduced by taking the microstep drive method.

저가격형으로 프로토타잎 하이브리드형 리니어 펄스 모터(LPM)가 편측형으로 설계되었다. 모터의 정특성 및 동특성 측정위한 측정기기를 설계 제안하였다. 실험측정결과 프로토타잎 리니어 펄스 모터의 정특성 및 동특성을 구체적인 추력의 값으로 확인하였다. 프로트타잎 리니어 펄스 모터를 구형파와 마이크로스텝 구동으로 구동하여 각각의 경우의 추력의 변화를 확인하였다. 실험결과 마이크로스텝구동방식에서 추력리플이 현저히 줄어든 것을 확인할 수 있었다.

Keywords

References

  1. Yamada 외, "Development of a Flat LPM having a large Thrust/Input Ratio of 20NfW for Artifical Heart Applications" 電氣學會 論文誌 VoL 109, No., 1, pp.57-90, 1990
  2. 山本, 山田, "平板狀永久磁石形リニアモータの磁石回路と始動特性解析", 電氣學會論文誌, Vol.104-B. No.5, pp.265-272, 1984
  3. 조윤현, 구대현, 이재봉, "서보액튜에이터용 Hybrid형 LPM의 정추력 및 수직력 계산", 대한전기학회 하계학술대회 논문집, pp.43-45, 1994
  4. 윤신용, 백수현, 김용, "리니어필스모터의 추력 및 수직력에 대한 특성 해석", 조명 전기 설비학회 논문지, Vol.13, No.4, pp.142-151, 한국조명전기설비학회, 1999
  5. 설진수, 임경화, "선형 모터의 동특성 분석", 한국 소음 진동공학회 춘계학술대회, Vol. 2005, pp.258-263, 2005
  6. G. Singh, B.C. Kuo, and R. Marion, "Dynamic Modelling of Pennanent-Magnet Step Motors", Proceedings Fourth Annual Symposium-Incremental Motion Control Systems and Devices, 1975
  7. K.S. Kordik, "Dynamic Torque Measurements for Step Motors", Proceedings Fifth Annual SymposiumIncremental Motion Control Systems and Devices, 1976
  8. Takashi Kenjo, " Stepping Motors and their Micrpprocessor Controls", Oxford University Press, 1984
  9. Yamada, "産業用 リニアモーター", 工業調査會 刊行, 1981