초음파-적외선 열화상 기법에 의한 피로균열 검출에 있어 발열 메커니즘 분석

Analysis of Heat Generation Mechanism in Ultrasound Infrared Thermography

  • 최만용 (한국표준과학연구원 안전그룹) ;
  • 이승석 (한국표준과학연구원 안전그룹) ;
  • 박정학 (한국표준과학연구원 안전그룹) ;
  • 김원태 (공주대학교 생물산업기계공학부) ;
  • 강기수 (한국표준과학연구원 안전그룹)
  • 발행 : 2009.02.28

초록

초음파 적외선 비파괴 열화상 검사기술의 발열 메커니즘은 정확히 규명되지 않았으나, 열-기계 연성효과와 결함 계면 사이의 마찰효과가 주요한 원인인 것으로 추정되고 있다. 본 논문에서는 피로균열을 갖는 알루미늄 합금 시험편에서 결함을 검출하고, 실험조건으로부터 각각의 메커니즘에 따라 온도 변화를 수치 예측하였다. 시험결과와 수치예측 결과로부터 발열의 주요한 원인이 마찰이라는 것을 밝혔다.

Heat generation mechanism of ultrasound infrared thermography is still not well understood, yet and there are two reliable assumptions of heat generation, friction and thermo-mechanical effect. This paper investigates the principal cause of heat generation at fatigue crack with experimental and numerical approach. Our results show most of heat generation is contributed by friction between crack interface and thermo-mechanical effect is a negligible quantity.

키워드

참고문헌

  1. A. Dillenz, A. Salerno, D. Wu, J. Rantala and G. Busse, 'Progress in ultrasonic lockin thermoraphy,' QIRT 98, pp. 154-160, (1998)
  2. 조재완, 서용칠, 정승호, 정현규, 김승호, '초음파 서모그라피를 이용한 실시간 결함 검출에 대한 연구', 비파괴검사학회지, 26권, 4호, pp. 211-219, (2006)
  3. C. Homma, M. Rothenfusser, J. Baumann and R. Shannon, 'Study of the heat generation mechanism in acoustic thermography,' Review of Quantitative Nondestructive Evaluation, Vol. 25, pp. 566-573, (2006) https://doi.org/10.1063/1.2184578
  4. N. G. H. Meyendorf, H. Rosner, V. Kramb and S. Sathish, 'Thermo-acoustic fatigue characterization,' Ultrasonics, Vol. 40, pp. 427-434, (2002) https://doi.org/10.1016/S0041-624X(02)00155-5
  5. Xiaoyan Han, Zhi Zeng, Wei Li, Md. Sawar Islam, Jianping Lu, and Vera Loggins, E. Yitamben, L. D. Favro and G. Newaz, R. L. Thomas, 'Acoustic chaos for enhanced detectability of cracks by sonic infrared imaging,' Journal of Applied Physics, Vol. 95, No. 7, pp. 3792-3797, (2004) https://doi.org/10.1063/1.1652243
  6. W. Thomson(Lord Kelvin), 'On the dynamical theory of heat,' Trans. Roy. Soc. Edimbourg, Vol. 20. (1853)
  7. M. Taburdagitan and M. Akkok, 'Determination of surface temperature rise with thermoelastic analysis of spur gears,' Wear, Vol. 261, pp. 656–665, (2006) https://doi.org/10.1016/j.wear.2006.01.019