Self-Optimizing Structural Design of a Pre-engineered Building System with Nonprismatic Members based on AISC2005

AISC2005에 기준한 변단면 선설계 건축물시스템의 자동화 최적구조설계

  • 김용석 (국립목포대학교 건축공학전공) ;
  • 오명호 (국립목포대학교 건축공학전공) ;
  • 송병규 ((주)민영엔지니어링건축사사무소)
  • Received : 2008.10.03
  • Accepted : 2009.01.29
  • Published : 2009.04.27

Abstract

Structural design of most nonprismatic Pre-Engineered Building Systems (PEBS) is performed using optimizing software developed in foreign countries. In this study, a structural optimizing software for the design of 3-D structures of nonprismatic PEBS is developed according to the allowable stress design method of AISC2005 and KBC. Optimizing structural design with nonprismatic members is carried out by repeating the process of structural analysis and member design to minimize the weight of a structure. According to the optimizing design results of 2-D and 3-D structures with nonprismatic members, there are considerable steel savings in designing structures with nonprismatic H-shaped built-up sections rather than with H-shaped rolled sections. When H-shaped built-up sections were used, the weight of the structural steel was reduced when AISC2005 specification rather than AISC1898 was used in the design. It is therefore concluded that utilizing the new AISC2005 specification is safer in preventingweb buckling because the height of a member is designed to be small despite some differences depending on the structural type.

철골 Pre-Engineered Building System(PEBS)이 국내에서도 80년도 후반부터 상당히 일반화되었지만 변단면 PEBS는 대부분 국외에서 개발된 최적화 프로그램으로 구조설계가 수행되고 있다. 이 연구에서는 3차원 변단면 PEBS의 구조설계를 AISC2005의 허용응력설계법과 KBC 기준에 따라 주어진 여러 제약조건들을 만족하도록 수치해석법으로 최적화하는 프로그램을 개발하였다. 변단면 구조물의 최적화 설계는 구조해석과 최적 부재설계를 수행하는데, 구조물의 최소 중량화를 위해서 구조해석과 부재설계 과정을 허용응력조건과 변위조건이 만족될 때까지 반복 수행한다. 2, 3차원 변단면 구조물을 최적화 설계한 결과에 의하면 변단면 용접 H-형강으로 설계하는 것이 압연 H-형강보다 상당한 철골 절약효과가 있는 것으로 나타났다. 변단면 용접 H-형강으로 설계하는 경우 구조물의 종류에 따라 차이는 있지만 AISC2005 기준으로 설계하는 것이 AISC1989 기준보다 철골량이 줄어들었고, 부재 춤도 작게 설계되어 웨브 좌굴에 새 기준이 더 안전한 것으로 평가되었다.

Keywords

Acknowledgement

Supported by : 국토해양부

References

  1. 김용석(1995) 변단면 철골구조 최적화를 위한 자동화설계 프로그램에 관한 연구, 한국강구조공학회논문집, 제7권 제1호, pp.153-159
  2. 김치경(1999) 변단면 PEB를 위한 엔지니어링 데이터베이스의 설계와 구축, 대한건축학회논문집 구조계, 15권 8호(통권130호), pp.3-14
  3. 김호수(1996) 변단면부재와 P.E.B.시스템에 의한 박공형철골조의 최적설계방안에 관한 연구, 대한건축학회논문집, 12권 5호(통권 91호), pp.155-166
  4. 심현주 외4인(2007) 춤이 큰 웨브 변단면 H형 보의 휨내력에 대한 실험적 평가, 한국강구조공학회논문집, 제19권 제5호(통권 90호), pp.483-492
  5. 이한주, 김호수, 신호범(2007) 변단면 부재를 이용한 산형 철골조 건물의 최적설계, 대한건축학회논문집 구조계, 제23권 제10호(통권 228호), pp.67-74
  6. A. Borkowski & S. Jendo(1990) Structural Optimization: Mathematical Programming, Vol. 2, Plenum Press
  7. AISC(2005) Specification for Structural Steel Buildings, ANSI/AISC 360-05
  8. C. G. Salmon et al.(1996) Steel Structures : Design and Behavior, 4th Ed., Harper & Row Publishers
  9. MBMA(2002) Metal Building Systems Manual: Design Practices Code of Standard Practice Guide Specifications Nomenclature
  10. R. K. Livesley(1975) Matrix Methods of Structural Analysis, 2ND Ed., Pergamon Press
  11. Z. Friedman and J. B. Kosmatka(1992) Exact Stiffness Matrix of A Nonuniform Beam-I. Extension, Torsion and Bending of a Bernoulli-Euler Beam, Computers & Structures, Vol. 42, No. 5, pp. 671-682 https://doi.org/10.1016/0045-7949(92)90179-4