한국자동차공학회논문집 (Transactions of the Korean Society of Automotive Engineers)

  • 제17권1호
  • /
  • Pages.24-34
  • /
  • 2009
  • /
  • 1225-6382(pISSN)
  • /
  • 2234-0149(eISSN)
한국자동차공학회 (The Korean Society of Automotive Engineers)
권호 표지

금속폼을 이용한 Partial DPF의 설계 및 전산유체해석 연구

Study of Design & CFD Analysis for Partial DPF Utilizing Metal Foam

  • 윤천석 (한남대학교 기계공학과) ;
  • 조규백 (한국기계연구원 친환경엔진연구센터)
  • 발행 : 2009.01.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

DPF(Diesel Particulate Filter)s have been used to reduce the most of PM(particulate matters) from the exhaust emissions of diesel engine vehicles. Metal foam is one of promising materials for the DPFs due to its cost effectiveness, good thermal conductivity and high mechanical strength. It can be fabricated with various pore sizes and struct thickness and coated with catalytic wash-coats with low cost. In order to design metal foam filter and analyze the flow phenomena, pressure drop and filtration experiment are carried out. Partial DPF which has PM reduction efficiency of more than 50 % is designed in this paper. Also, CFD analysis are performed for different configurations of clean filters in terms of pressure drop, uniformity index, and velocity magnitude at face of filter. Filter thickness and the gap between front and rear filters are optimized and recommended for manufacturing purpose.

키워드

참고문헌

  1. http://www.dieselnet.com
  2. G. C. Koltsakis, D. K. Katsaounis, Z. C. Samaras, Z. C., D. Naumann, S. Saberi and A. Bohm, 'Filtration and Regeneration Performance of a Catalyzed Metal Foam Particulate Filter,' SAE 2006-01-1524, 2006
  3. G. Cho, H. Choi, Y. Jeong, H. Kim, S. Ahn, B. Jeong, Y. Choi, D. Kim, C.S. Yoon, E. Lee, K. Oh, S. Han, K. Kim, S. Park, G. Kim and S. Choi, 'PM Reduction Performance and Regeneration Characteristics of Catalyzed Metal Foam Filters for a 3L Diesel Passenger Vehicle,' SAE 2007-01-3456, 2007
  4. H. Choi, Study on Prediction of Pressure Drop of a Metallic Foam DPF, M. S. Thesis, Sungkyunkwan University, 2006
  5. J. Kim, K. Cha, K. Oh, H. Kim, Y. Jeong and G. Cho, 'A Study on the Particle Reduction Performance of Metal Foam Filter,' Fall Conference Proceedings, Vol.I, KSAE, pp.479- 484, 2005
  6. J. Kim, K. Cha, H. Kim, G. Cho and Y. Jeong, 'The Characteristics of Pressure Drop and Trapping for Diesel Particulate Filter System Using Pellet Filters,' Spring Conference Proceedings, Vol.I, KSAE, pp.280-286, 2004
  7. S. Lee, G. Cho, J. Kim, H. Kim, E. Lee, K. Oh, S. Han, K. Kim and Y. Jeong, 'Study on the Performance of Radial Type Metal Foam DPF,' Spring Conference Proceedings, Vol.I, KSAE, pp.414-419, 2006
  8. A. G. Konstandopoulos and J. H. Johnson, 'Wall-flow Diesel Particulate Filters - Their Pressure Drop and Collection Efficiency,' SAE 890405, 1989
  9. A. Konstandopoulos, E. Skaperdas and M. Masoudi, 'Inertial Contributions to the Pressure Drop of Diesel Particulate Filters,' SAE 2001-01-0909, 2001
  10. H. Weltens, H. Bressler, F. Teres, H. Neumaier and D. Rammoser, 'Optimization of Catalytic Converter Gas Flow Distribution by CFD Predictions,' SAE 930780, 1993
  11. A. Martin, N. Will, A. Bordet, P. Cornet, C. Gomdoin and X. Mouton, 'Effect of Flow Distribution on Emissions Performance of Catalytic Converters,' SAE 980936,1998
  12. M. Berkman and A. Katari, 'Transient CFD : How Valuable is It for Catalyst Design,' SAE 2002-01-0064, 2002
  13. Fluent Inc., Fluent 6 User's Guide, 2002
  14. C. S. Yoon, "CFD Analysis for Development of Partial DPF Utilizing Metal Foam," Research Report, 2007
  15. S. Park, D. Lee, J. Kim, G. Cho, H. Kim and Y. Jeong, 'Filtration Characteristics of Metal Foam Filters for DPF Combined with Electrostatic Precipitation Mechanism,' Transactions of KSAE, Vol.15, No.2, pp.151-158, 2007