DOI QR코드

DOI QR Code

Effect of Manufacturing Conditions on the Properties of Oil-absorbable Melt Blown Nonwoven

멜트블로운 부직포 제조공정이 유흡착포의 특성에 미치는 영향

  • Shin, Hyun-Sae (Department of Fiber System Engineering, Dankook University) ;
  • Jin, Lu (Department of Fiber System Engineering, Dankook University) ;
  • Yoo, Joo-Hwan (Department of Fiber System Engineering, Dankook University)
  • 신현세 (단국대학교 파이버시스템공학) ;
  • 김로 (단국대학교 파이버시스템공학) ;
  • 유주환 (단국대학교 파이버시스템공학)
  • Published : 2009.12.27

Abstract

Oil-absorbable nonwovens were produced by melt-blown processing of polypropylene chips. The melt-blown processing conditions, such as air pressure, and gear pump speed, DCD. In this study, these three factors were chosen to produce samples. Experimental array and variance analysis of the design of experiment were used to increase the field repeatability and universality. The effect of the factors on oil absorption properties of melt-blown nonwoven fabric such as oil absorbency were evaluated. As a result, the fiber diameter decreased as gearpump speed decreased or air pressure increased. The oil absorbency increased as air pressure increased or gearpump speed decreased and with the DCD increasing the oil absorbency significantly increased.

References

  1. B. Wu, M.H. Zhou. 'Recycling of waste tyre rubber into oil absorbent', Wast Management, pp.1-5, 2008
  2. Lin Hailan and Liao Jianhe, Preparation and Properties of NR Oil Absorption Composite, Rubber Industry(China), 7, 403-407(2007)
  3. T. Shimizu, S. Koshiro, Effect of Cell Structure on Oil Absorption of Highly Oil Absorptive Polyurethane Foam for On-Site Use, Journal of Applied Polymer Science, 65, 179-186(1997) https://doi.org/10.1002/(SICI)1097-4628(19970705)65:1<179::AID-APP21>3.0.CO;2-Y
  4. C. H. Joo, T. Y. Park, Structure and Technology Trend of Meltblown Nonwoven, Journal of the Korean Fiber Society, 28(12), 8-16(1991)
  5. Korean Industrial Standard, K1600:2005, 2005
  6. J. H. Song, 'Quality Control', Young-Seol Publisher, Seoul, pp.317-354, 1998
  7. Ishikawa, Kaoru, Fujimori, and Toshimi Kume, 'Method of Experimental Design', Japan, pp.153-155, 1972
  8. B. Majumdar and R. L. Shambaugh, Air Drag on Filaments in the Melt Blowing Process, Journal of Rheology, 34, 591(1990) https://doi.org/10.1122/1.550097
  9. Young Min kim, Ho Gyu Jeong, Effect of Meltblown Processing Conditions on the Physical Properties of Polypropylene Fiber Web Fabrics, Journal of the Korean Fiber Society, 33(2), 107-115(1996)
  10. Hyunjoo Shim and Sung Chul Kim, Effect of Processing Factors on the Physical Properties of Meltblown Polypropylene Fiber Web Fabrics(Ⅱ), Journal of the Korean Fiber Society, 33(6), 492-498(1996)

Cited by

  1. Functional Finishing of Nonwoven Filter for Dust-proof/Medical Masks by Corona Discharging Treatment vol.25, pp.3, 2013, https://doi.org/10.5764/TCF.2013.25.3.232