Journal of the Korean Society of Propulsion Engineers (한국추진공학회지)

The Korean Society of Propulsion Engineers (한국추진공학회)
권호 표지

Exergy Analysis of Regenerative Steam-Injection Gas Turbine Systems

증기분사 재생 가스터빈 시스템의 엑서지 해석

  • 김경훈 (금오공과대학교 기계공학부) ;
  • 정영관 (금오공과대학교 기계공학부) ;
  • 한철호 (금오공과대학교 기계공학부)
  • Published : 2009.08.30
Download PDF
⟨ Previous Next ⟩

Abstract

An exergy analysis is carried out for the regenerative steam-injection gas turbine systems which has a potential of enhanced thermal efficiency and specific power. Using the analysis model in the view of the second law of thermodynamics, the effects of pressure ratio, steam injection ratio, ambient temperature and turbine inlet temperature are investigated on the performance of the system such as exergetic efficiency, heat recovery ratio of heat exchangers, exergy destruction, loss ratios, and on the optimal conditions for maximum exergy efficiency. The results of computation show that the regenerative steam-injection gas turbine system can make a notable enhancement of exergy efficiency and reduce irreversibilities of the system.

열효율과 비동력을 대폭 향상시킬 수 있는 잠재성을 가진 증기분사 재생 가스터빈 시스템에 대해 엑서지 해석을 수행하였다. 열역학 제2법칙을 근거로 한 해석 모델을 이용하여 압력비, 증기분사율, 주위 온도, 터빈입구온도 등 주요 설계변수들의 변화에 따라 엑서지 효율, 열교환기의 엑서지 회수율, 엑서지 파괴율 및 손실률 등 시스템의 성능과 최대 엑서지 효율에 미치는 영향을 조사하였다. 계산 결과 재생 증기분사 가스터빈 시스템은 시스템의 엑서지 효율을 대폭 증대시키고 비가역성을 감소시킨다는 사실을 확인하였다.

Keywords

References

  1. Jonsson M. and Yan J., 'Humidified gas turbines - a review of proposed and implemented cycles,' Energy, Vol. 30, 2005, pp.1013-1078 https://doi.org/10.1016/j.energy.2004.08.005
  2. 정두천, '가스터빈 열병합 발전설비,' 설비저널, Vol. 29, 2000, pp.35-38
  3. Poullikkas A., 'An overview of current and future sustainable gas turbine technologies,' Renewable and Sustainable Energy Reviews, Vol. 9, 2005, pp.409-443 https://doi.org/10.1016/j.rser.2004.05.009
  4. Bassily A. M., 'Effects of evaporative inlet and aftercooling on the recuperated gas turbine cycle,' Applied Thermal Eng., Vol. 21, 2001, pp.1875-1890 https://doi.org/10.1016/S1359-4311(01)00054-0
  5. Khaliq A. and Choudhary K., 'Thermodynamic performance assessment of an indirect intercooled reheat regenerative gas turbine cycle with inlet air cooling and evaporative aftercooling of the compressor discharge,' Int. J. Energy Research, Vol. 30, 2001, pp.1295-1312 https://doi.org/10.1002/er.1221
  6. Nishida K., Takaki T., and Kinoshita S., 'Regenerative steam-injection gas-turbine systems,' Applied Energy, Vol. 81, 2005, pp.231-246 https://doi.org/10.1016/j.apenergy.2004.08.002
  7. 박종구, 양옥룡, '흡기냉각-증기분사 가스터빈사이클에 대한 열역학적 연구,' 대한기계학회논문집, Vol. 16, No. 1, 1992, pp.77-86
  8. Kim T.S., Song C.H, Roh S.T, Kauh S.K, 'Influence of ambient condition on thermodynamic performance of the humid air turbine cycle,' Energy, Vol. 25, 2000, pp.313-324 https://doi.org/10.1016/S0360-5442(99)00074-2
  9. 강정식, 차봉준, 양수석, '물입자를 분사하는 원심압축기의 성능해석,' 한국추진공학회2005 춘계학술대회, 2005, pp.237-242
  10. 전무성, 이종준, 김동섭, '수분사를 통한 마이크로터빈 성능향상 해석,' 유체기계저널, Vol. 12, 2009, pp.46-51 https://doi.org/10.5293/KFMA.2009.12.2.046
  11. Kim K. H. and Perez-Blanco H., 'Potential of regenerative gas-turbine systems with high fogging compression,' Applied Energy, Vol. 84, 2007, pp.16-28 https://doi.org/10.1016/j.apenergy.2006.04.008
  12. Perez-Blanco H., Kim K. H., and Ream S., 'Evaporatively-cooled compression using a high-pressure refrigerant,' Applied Energy, Vol. 84, 2007, pp.1028-1043 https://doi.org/10.1016/j.apenergy.2007.02.013
  13. Kim K. H. and Perez-Blanco H., 'An assessment of high-fogging potential for enhanced compressor performance, ASME paper No. GT2006-90482, Barcelona, 2006
  14. Yari M. and Sarabchi K., 'Exergical analysis of the part-flow evaporative gas turbine cycles,' ASME paper No. GT2005-68970, IGTI-Turboexpo, Reno, 2005
  15. Ozgener O. and Hepbasli A., 'A review on the energy and exergy analysis of solar assisted heat pump systems,' Renewable and Sustainable Energy Reviews, Vol. 11, 2007, pp.482-496 https://doi.org/10.1016/j.rser.2004.12.010
  16. Cengel Y. A., 'Heat and mass transfer. A practical approach,' 3rd Ed., McGraw-Hill, 2006
  17. Bejan A., 'Advanced Engineering Thermodynamics,' John Wiley & Sons, 3rd Ed., 2006