Journal of the Korean Crystal Growth and Crystal Technology (한국결정성장학회지)

The Korea Association of Crystal Growth (한국결정성장학회)
권호 표지

Fabrication of functional nanoparticles by layer-by-layer self-assembly method

LBL 법을 이용한 기능성 나노 입자 제조

  • Kim, Jin-Ho (Korea Institute of Ceramic Engineering and Technology, Glass & Display Team) ;
  • Hwang, Jong-Hee (Korea Institute of Ceramic Engineering and Technology, Glass & Display Team) ;
  • Lim, Tae-Young (Korea Institute of Ceramic Engineering and Technology, Glass & Display Team) ;
  • Kim, Sae-Hoon (Department of Ceramic Engineering, Gangneung-Wonju National University)
  • 김진호 (한국세라믹기술원 유리 디스플레이팀) ;
  • 황종희 (한국세라믹기술원 유리 디스플레이팀) ;
  • 임태영 (한국세라믹기술원 유리 디스플레이팀) ;
  • 김세훈 (강릉원주대학교 세라믹공학과)
  • Published : 2009.12.31
Download PDF
⟨ Previous Next ⟩

Abstract

$TiO_2$ thin films consisting of positively charged poly (diallyldimethylammonium chloride) (PDDA) and negatively charged titanium (IV) bis (ammonium lactato) dihydroxide (TALH) were successfully fabricated on a poly (methyl methacrylate) (PMMA) by layer-by-layer (LBL) self-assembly method. By the measurement of quartz crystal microbalance (QCM), it was found that as the solution pH of TALH decreased, the deposition volume of TALH increased and the thickness of (PDDA/TALH) thin film coated on the surface of PMMA particles increased. The PMMA particles coated with the coating sequence of (PDDA/TALH)n showed the variation of color changes as a function of the number of bilayer. The number of bilayer (n) of (PDDA/TALH) thin films was 10 and 20, the values of $a^*$ and $b^*$ decreased from those of PMMA particles without coating films and the color changes was shifted to green and blue direction in the $a^*$, $b^*$ chromaticity diagram. And then, the number of n increased to 30 and 40, the values of $a^*$ and $b^*$ increased and the color changes was shifted to red and yellow direction, respectively. Finally the PMMA particles coated with $(PDDA/TALH)_{50}$ thin film showed a little same value of $a^*$ and $b^*$ with the PMMA particles without (PDDA/TALH) thin film.

PMMA 입자의 표면에 양전하를 갖는 전해질 폴리머 PDDA와 음전하를 갖는TALH를 사용하여 $TiO_2$ 박막을 LBL 법에 의해 성공적으로 제조하였다. 수정진동자의 측정을 통해 TALH의 용액의 pH가 감소됨에 따라 TALH의 적층량이 늘어나고 PMMA의 입자 표면에 코팅된 (PDDA/TALH) 박막의 두께가 증가됨을 확인하였다. (PDDA/TALH)n의 순서에 의해 코팅된 PMMA 입자들은 bilayer 수의 변화에 따라 다양한 색 변화를 보여주었다. (PDDA/TALH) 박막의 bilayer 수(n)가 10과 20 일 경우에 $a^*$와 $b^*$의 값은 막이 코팅되지 않은 PMMA의 값보다 감소하였고 색 변화는 $a^*$, $b^*$ 색도도에서 각각 green과 blue 방향으로 이동하였다. 이후 n의 수가 30, 40으로 증가됨에 따라 $a^*$와 $b^*$의 값은 증가하였고 색의 변화는 red와 yellow 방향으로 각각 이동하였다. 최종적으로 $(PDDA/TALH)_{50}$ 박막이 코팅된 PMMA 입자들은 박막이 코팅되지 않은 PMMA 입자들과 거의 비슷한 $a^*$와 $b^*$의 값을 보여주었다.

Keywords

References

  1. F. Caruso, "Nanoengimeering of particles surfaces", Adv. Mater. 13 (2001) 11 https://doi.org/10.1002/1521-4095(200101)13:1<11::AID-ADMA11>3.0.CO;2-N
  2. K.S. Mayya, D.I. Gittins and F. Caruso, "Gold-titania core-shell nanoparticles by polyelectrolyte complexation with a titania precursor”, Chem. Mater. 13 (2001) 3833 https://doi.org/10.1021/cm011128y
  3. L.M. Liz-Marzan, M. Siersig and P. Mulvaney, "Synthesis of nanosized gold-silica core-shell particles", Langmuir 12 (1996) 4329 https://doi.org/10.1021/la9601871
  4. M.K. Nazeeruddin, A. Kay, I. Rodicio, R. Humphry-Baker, E. Muller, P. Liska, N. Vlachopoulos and M. Gratzel, “Conversion of light to electricity by cis-$X_2Bis$(2,2'-bipyridyl-4,4'-dicarboxylate) ruthenium(II) charge-transfer sensitizer (X = $Cl^-$, $Br^-$, $I^-$, $CN^-$ and $SCN^-$) on nanocrystalline TiO2 electrodes”, Am. Chem. Soc. 115 (1993) 6382 https://doi.org/10.1021/ja00067a063
  5. A.L. Linsebigler, L. Guangquan and J.T. Yates, Jr., "Photocatalysis on TiO2 surface: principles, machanisms, and selected results", Chem. Rev. 95 (1995) 735 https://doi.org/10.1021/cr00035a013
  6. P. Chrysicopoulou, D. Davazoglou, Chr. Trapalis and G. Kordas, "Optical properties of very thin (< 100 nm) solgel $TiO_2$", Thin Solid Films 323 (1998) 188 https://doi.org/10.1016/S0040-6090(97)01018-3
  7. M. Takeuchi, T. Itoh and H. Nagasaka, "Dielectric properties of sputtered TiO2 films", Thin Solids Films 51 (1978) 83 https://doi.org/10.1016/0040-6090(78)90215-8
  8. K.S. Yeung and Y.W. Lam, "A simple chemical vapour deposition method for depositing thin $TiO_{2}$ films", Thin Solids Films 109 (1983) 169 https://doi.org/10.1016/0040-6090(83)90136-0
  9. J.H. Kim and S. Shiratori, "Characterization of $TiO_2$/ Polyelectrolyte thin film fabricated by a layer-by-layer self-assembly method", Jpn. J. Appl. Phys. 44 (2005) 7588 https://doi.org/10.1143/JJAP.44.7588
  10. Y. Tsuge, J.H. Kim, Y. Sone, O. Kuwaki and S. Shiratori, "Fabrication of transparent TiO2 film with high adhesion by using self-assembly method: Application to super-hydrophilic film", Thin Solid Films 516 (2008) 2463 https://doi.org/10.1016/j.tsf.2007.04.084
  11. G. Decher, J.D. Hong and J. Schmitt, "Buildup of ultrathin multilayer films by a self-assembly process: Consequtively alternating adsorption of anionic and cationic polyelectrolytes on charged surfaces", Thin Soild Films 210/211 (1992) 831 https://doi.org/10.1016/0040-6090(92)90417-A
  12. J.D. Mendelsohn, C.J. Barrett, V.V. Chan, A.J. Pal, A.M. Mayes and M.F. Rubner, "Fabrication of micrporous thin films from polyelectrolyte multilayers", Langmuir 16 (2000) 5017 https://doi.org/10.1021/la000075g
  13. S.S. Shiratori and M.F. Rubner, "pH-dependent thickness behavior sequentially adsorbed layers of weak polyelectrolytes", Macromolecules 33 (2000) 4213 https://doi.org/10.1021/ma991645q
  14. F. Caruso, X. Shi, R.A. Caruso and A. Susha, "Hollow titania spheres from layered precursor deposition on sacrificial colloidal core particles", Adv. Mater 13 (2001) 740 https://doi.org/10.1002/1521-4095(200105)13:10<740::AID-ADMA740>3.0.CO;2-6