한국전산유체공학회지 (Journal of computational fluids engineering)

한국전산유체공학회 (Korean Society of Computational Fluids Engineering)
권호 표지

원형휜-원형관 열교환기의 휜효율 이론에 관한 수치적 검증

VERIFICATION OF FIN EFFICIENCY THEORY FOR THE CIRCULAR FINNED-TUBE HEAT EXCHANGER BY NUMERICAL EXPERIMENT

  • 강희찬 (군산대학교 기계자동차공학부) ;
  • 임복빈 (군산대학교대학원 기계공학과) ;
  • 이종휘 (군산대학교대학원 기계공학과)
  • 발행 : 2009.12.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The purpose of the present study is to investigate the convective heat transfer characteristics and the validity of fin efficiency of the circular finned-tube heat exchanger by using commercial CFD code. The heat transfer coefficient obtained by using the laminar model was 22% overestimated to the experimental data. The fin surface temperature compared with the experimental data measured by the liquid crystal method. The fin efficiency by the present numerical experiment, defined as normalized and averaged fin surface temperature, was greater than the theoretical fin efficiency and the difference is increased at high value of the factor $mr{\phi}$.

키워드

참고문헌

  1. 1994, Webb, R.L., Principles of Enhanced Heat Transfer, John Wiley and Sons
  2. 1997, Wang, C.C., Fu, W.L. and Chang, C.T., "Heat Transfer and Friction Characteristics of Typical Wavy Fin-and-tube Heat Exchanger," Experimental Thermal and Fluid Science, Vol.14, No.2, pp.174-186 https://doi.org/10.1016/S0894-1777(96)00056-8
  3. 1989, Hatada, T., Ueda, U., Oouchi, T. and Shimitz, T., "Improved Heat Transfer Performance of Air Coolers by Strip Fins Controlling Air Flow Distribution," ASHRAE Transactions, Vol.95, Part 1, pp.166-170
  4. 1996, Wang, C.C., Chen, P.Y. and Jang, J.Y., "Heat Transfer and Friction Characteristic of Convex-Louver Fin-and-Tube Heat Exchanger," Experimental Heat Transfer, Vol.9, pp.61-78 https://doi.org/10.1080/08916159608946514
  5. 1997b, Wang, C.C., Lee, W.S. and Chang, C.T., "Heat and Mass Transfer for Plate Fin-and-tube Heat Exchanger with and without Hydrophilic Coating," Working Paper
  6. 1996, Kang, H.C. and Kim, M.H., "An Experimental Study on the Thermohydraulic Characteristics of Actual Plane and Strip Fins for Air-conditioner," Proceedings of the 3rd KSME-JSME Thermal Engineering Conference, Vol.3, Kyoungju, Korea, pp.139-144
  7. 2003, Moon, M.S., "Numerical Investigation of Air-Side Heat Transfer and Pressure Drop in Circular Fin-and-tube Heat Exchanger"
  8. 1976, Goldstein, L.Jr. and Sparrow, E.M., "Experiments on the Transfer Characteristics of a Corrugated Fin and Tube Heat Exchanger Configuration," J. of Heat Transfer, Vol.98, pp.23-34
  9. 1987, Beecher, D.T. and Fagan, T.J., "Effect of Fin Pattern on the Air-Side Heat Transfer Coefficient in Plate Finned-Tube Heat Exchangers," ASHRAE Transactions, Vol. 93, Part 2
  10. 1992, Ali, M.M. and Ramadhyani, S., "Experiment on Connective Heat Transfer in Corrugate Channels," Experimental Heat Transfer, Vol.5, pp.175-193 https://doi.org/10.1080/08916159208946440
  11. 1977, Ito, M., Kimura, H. and Senshu, T., "Development of High Efficiency Air-cooled Heat Exchanger," Hitachi Review, Vol.26. pp.323-327
  12. 1988, Bayazito$\breve{g}$lu, Y. and $\ddot{O}$zisik, M.N., Elements of Heat Transfer, McGraw-Hill
  13. 1999, Kang, H.C., "판형 휜을 갖는 열교환기의 휜효율에 관한 수치해석적 연구," 공기조화.냉동공학회 논문집, Vol.11, pp.903-911
  14. 1945, Schmidt, T.E., "La Production Calorifuque des Surfaces Munies D'ailettes," Annexe Du Bulletin De L'Institute International Du Froid, Annexe G-5
  15. 2006, ANSYS, Inc., ANSYS CFX Training Manual, Vol. 124
  16. 2003, 강희찬, 조도영, 강민철, "원형휜-원형관의 열전달특성," 설비공학논문집, Vol.15, pp.762-767
  17. 2004, 강희찬, 강민철, "단일 원형휜-원형관에 대한 강제대류열전달 상관식," 설비공학논문집, Vol.16, pp.584-588