Elastomers and Composites

  • 제44권1호
  • /
  • Pages.2-12
  • /
  • 2009
  • /
  • 2092-9676(pISSN)
  • /
  • 2288-7725(eISSN)
한국고무학회 (The Rubber Society of Korea)
권호 표지

재활의료공학용 실리콘고무 응용

Silicone Rubbers in Medical Engineering for Rehabilitation

  • Lee, Suk-Min (KOREC (Korea Orthopedics and Rehabilitation Engineering Center)) ;
  • Song, Jeom-Sik (KOREC (Korea Orthopedics and Rehabilitation Engineering Center))
  • 발행 : 2009.03.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

키워드

참고문헌

  1. 정일남, '제3세대 실리콘화학' 자유아카데미 2004
  2. 특허청, '2002 신기술동향보고서-실리콘 고분자' 특허청 2002
  3. 김진호, 한태륜 '재활의학' 군자출판사 2002
  4. 박윤기, 이재학, 황현교 '보조기 및 의수족' 고문사 1986
  5. Y. Bar-Cohen 'Electroactive Polymer Actuators as Artificial Muscles' SPIE Press 2001
  6. 김남균 외 '의공학개론' 여문각 2000
  7. 권혜정 외, '보장구 의지학' 고문사, 1993
  8. 김홍재, '규소수지' 대광서림, 서울 1975
  9. B. D. Ratner 'Biomaterials Science- An introduction to materials in medicine' Academic Press, 1996
  10. F. H. Silver 'Biomaterials Science and Biocompatibility' Springer 1999
  11. M. Szycher 'Biocompatible polymers, metals, and composites' Technomic Pub. Co. Lancaster, 1983
  12. 김영철, '의료용실리콘 고무의 응용' Rubber Technology, 2, 81 (2001)
  13. Leininger, R. I., Bigg, D. M., 'Handbook of Biomaterial Evaluation', Macmillian Pub. Co., NY, 1986
  14. Szycher, M., ed., 'Biocompatible Polymers, Metals and Composites', Technomic Publishing Co., lancaster, PA, 1983
  15. 정경호, 강승경 '부가중합형 실리콘 고무 인상재' Rubber Technology, 2, 131 (2001)
  16. S. J. Covey, 'Flow Constraint and Loading Rate Effects on Prosthetic Liner Material and Human Tissue Mechanical Response', Journal of Prosthetics & Orthotics, 12, 15 (2000) https://doi.org/10.1097/00008526-200012010-00007
  17. 한국산업표준 KSP 8421 '다리의지 소켓 라이너- 제 1부 용어와 분류' (2006)
  18. 한국산업표준 KSP 0235 '다리의지 소켓 라이너- 제 2부 요구사항 및 테스트 방법' (2007)
  19. 대한민국 특허 이석민, 송점식 외, '미관의지용 고강도 실리콘고무 조성물' 공개번호: 10-0805744 (2008)
  20. ISO 11135 Medical devices-Validation and routine control of ethylene oxide sterilization (1994)
  21. ISO 11137-1 Sterilization of health care products-Requirements for validation and routine control-radiation sterilization (2006)
  22. ISO 11134 Sterilization of health care products-Requirements for validation and routine control-Industial moist heat sterilization (1994)
  23. K. J. Hemmerich, 'Polymer Materials Selection for Radiation-Sterilized Products', Medical Device & Diagnostic Industry, 2000
  24. Information sources include polymer manufactures data; 'Effects of Radiation on polymer & Elastomers' NASA/Jet Propulsion Laboratories, 1988
  25. Skeins and Williams, 'Ionizing Radiation Effect on Selected Biomedical Polymers'; Kiang, 'Effect of Gamma Irradiation on Elastomeric Closures', Technical report 16, PDA, 1992
  26. Ley, 'The Effects of Irradiation on Packaging Materials', 1976