한국정밀공학회지 (Journal of the Korean Society for Precision Engineering)

  • 제26권4호
  • /
  • Pages.55-63
  • /
  • 2009
  • /
  • 1225-9071(pISSN)
  • /
  • 2287-8769(eISSN)
한국정밀공학회 (Korean Society for Precision Engineering)
권호 표지

압력 비평형형 유압 베인 펌프의 토출 압력 맥동 특성 연구

A Study on the Discharge Pressure Ripple Characteristics of the Pressure Unbalanced Vane Pump

  • 장주섭 (경원대학교 기계자동차공학과)
  • Jang, Joo-Sup (Department of Mechanical & Automotive Engineering, Kyungwon Univ.)
  • 발행 : 2009.04.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This paper reports on the theoretical and experimental study of the pressure ripples in a pressure unbalanced type vane pump which have widespread use in industry. Because they can infinitely vary the volume of the fluid pumped in the system by a control. Pressure ripples occur due to the flow ripples induced by geometry of side plate, leakage flow, reverse flow from the outlet volume produced by pressure difference between pumping chamber and outlet volume when the pumping chamber connected with the outlet volume. In this paper, we measured the pressure variation of a pumping chamber, reaction force on a cam ring, the mathematical model for analyzing the pressure ripples which included vane detachment and fluid inertia effects in notch area has been presented, and was applied to predict the level and the wave form of the pressure ripples according to operating conditions.

키워드

참고문헌

  1. Kojima, E., Shinada, M. and Oshino, T., "Characteristic of Fluid borne Noise Generated by Fluid Power Pump(2nd Report, Pressure Pulsation in Balanced Vane Pump)," Bulletin of JSME, Vol. 27, No. 225, pp. 475-482, 1984 https://doi.org/10.1299/jsme1958.27.475
  2. Jang, J. -S., Kim, K. -H., Cho, M. -R. and Han, D. -C., "The Characteristics of Pressure Ripple in Variable Displacement Vane Pumps: Comparison between Theory and Experiment," Proc. Instn. Mech. Engrs. Part A: power and Energy, Vol. 216, Issue 1, pp. 89-96, 2002 https://doi.org/10.1243/095765002760024971
  3. Jang, J. -S. and Kim, K. -H., "A Study on the Discharge Pressure Ripple Characteristics of Variable Displacement Vane Pump," Transactions of the KSAE, Vol. 11, No. 3, pp. 106-114, 2003
  4. Ueno, H., Shintani, R. and Okazima, A., "Pressure and Flow Ripples of a Variable Displacement Vane Pump," J. of JSME, Vol. 53, No. 490, pp. 1742-1749,1986
  5. Cho, M. R., Han, D. C., Jang, J. S., Park, M. H. and Lee, C. H., "A Study on the Compression Process of Balanced Type Vane Pump for Electro-Hydraulic Power Steering," Transactions of the KSAE, Vol. 4, No. 5, pp. 215-222, 1996
  6. Kim, K. D., Cho, M. R., Han, D. C., Choi, S. H. and Jang, J. S., "An Analytical Study on the Pressure Ripples in a Positive Displacement Vane Pump," Transactions of the KSME(A), Vol. 22, No. 11, pp. 1964-1972, 1998
  7. Edge, K. A. and Darling, J., "Cylinder Pressure Transients in Oil Hydraulic Pumps with Sliding Plate Valve," Proc. Instn. Mech. Engrs. Part B: Journal of Engineering Manufacture, Vol. 200, No. B1, pp. 45-54, 1986
  8. Edge, K. A. and Johnston, D. N., "The 'Secondary Source' Method for the Measurement of Pump Pressure Characteristics, Part 2: Experimental Results," Proc. Instn. Mech. Engrs., Vol. 204, No. A1, pp. 41-46, 1990
  9. Kim, K. D., Cho, M. R., Han, D. C., Choi, S. H. and Moon, H. J., "A Study on the Role of Notch and Radius Reduction Ratio in the Balanced Vane Pump," J. of the KSPE, Vol. 15, No. 1, pp. 87-93, 1998