DOI QR코드

DOI QR Code

Anthropometric Analysis and Usability Evaluation of Four-wheeled Walker

보행보조차의 인체측정학적 분석 및 사용성 평가를 통한 디자인 개선

  • Published : 2009.05.30

Abstract

In this study, anthropometric analysis and usability evaluation for four-wheeled walker were carried out and then ergonomics design guidelines were proposed. In anthropometric analysis, design factors of four-wheeled walker were firstly identified and anthropometric design guidelines were made using Korean human scales. Design suitability for two typical four-wheeled walkers was analyzed in based on anthropometric design guidelines. Usability evaluation for two typical walkers was also performed through observation method and expert evaluation. Several usability problems were identified and design solutions were proposed for the design improvement of four-wheeled walker. Finally a design model of four wheeled walker considering analysis results was proposed.

Keywords

References

  1. 고효주, 교구용 책.걸상의 설계에 관한 인간공학적 연구, 조선대학교 산업대학원, 1986.
  2. 노인안전실태, 소비자시대, 4-5, 2007년 10월호.
  3. 산업자원부, 산업디자인을 위한 한국인 인체측정 및 활용 기술개발에 관한 연구, 1998.
  4. 이건, 휠체어 디자인을 위한 기초 연구, 서울시립대학교 디자인대학원, 2001.
  5. 이춘섭 옮김, 인체공학과 실내공간, 미진사, 1990.
  6. 한국표준연구소, VDT Workstation의 인간공학적 설계 및 평가기술에 관한 연구, 과학기술처, 1991.
  7. Cacha, C. A., Ergonomics and Safety in Hand Tool Design, Lewin Pub.,1992.
  8. Chaffin, D. B. and Anderson, G. B. J, Occupational Biomechannics. NewYork: John Wiley & Sons, 1991.
  9. Eastman Kodak Company, Ergonomic Design for People at Work. vol 1,New York: Van Nostrand Reinhold, 1983.
  10. Fisk, A. D. and Rogers, W. A., Handbook of Human Factors and the OlderAdult, Academic Press, 1997.
  11. 곽원모 외, 사무실 의자의 인간공학적 디자인, 디자인학연구, Vol. 31, 73-80, 1999.
  12. 구본언 외, 후천성 장애인을 위한 휠체어와 목발의 인간공학적 고찰, 산업경영시스템학회지, Vol. 23, 77-85, 2000.
  13. 송순영, 고령자 소비자정책의 발전방향, 소비자문제연구, Vol 30, 2006.
  14. 이관석 외, 한국 노인시설의 인체공학적 연구, 인간공학회지, Vol. 19, 73-76, 2000.
  15. 한국인 인체측정치수, http://sizekorea.kats.go.kr.
  16. Andreoni, G., Method for the analysis of posture and interface pressure ofcar drivers, Applied Ergonomics, Vol. 33, 511-522, 2002. https://doi.org/10.1016/S0003-6870(02)00069-8
  17. Floyd, W. F. and Roberts, D. F, Anatomical and physiological principles inchair and table design, Ergonomics, Vol. 2, 1-16, 1959. https://doi.org/10.1080/00140135808930397
  18. Mandal, A. C., The seated man (homo seden), the seated work position:theory and practice, Applied Ergonomics, Vol. 12, 19-20, 1981. https://doi.org/10.1016/0003-6870(81)90089-2

Cited by

  1. Worker-Centered Design for Working Area in the Electronic Industry vol.33, pp.3, 2014, https://doi.org/10.5143/JESK.2014.33.3.229