Deformation Measurement of I-Plate-Girder Bridge of Railroad Using Digital Photogrammetry

수치사진측량을 이용한 I형 철도 판형교 변형 측량

  • 이효성 (순천대학교 공과대학 토목공학과) ;
  • 조희진 (순천대학교 산업대학원 토목공학과) ;
  • 안기원 (경상대학교 공과대학 토목공학과) ;
  • 박병욱 (한경대학교 공과대학 토목공학과)
  • Published : 2009.12.31

Abstract

This study proposed digital close-range photogrammetric technique to measure deformation of I-plate-girder bridge. To compare deformation-measurement using the proposed method, a loading tester is used in the same time. As results, deviations of measuring values between the two methods range from 1mm to 2mm, and we could find-out simultaneously deflection and torsion of I-plate girder by repeated load of train. Then this study verified a measuring feasibility of I-plate-girder deformation by the proposed method. This may be alternative method of precise-stability inspection and manpower inspection.

본 연구에서는 철도 판형교의 변형량을 측정하기 위해, 수치근접 사진측량 기법을 제안하였다. 제안방법에 의한 변형측량의 비교를 위해 기존 재하시험 방법을 동시에 수행하였다. 그 결과, 제안방법과 재하시험에 의한 측정값 차이는 1~2mm 정도였으며, 열차의 반복하중으로 인한 I형거더의 처짐과 비틀림 현상을 동시에 파악할 수 있었다. 따라서 수치사진측량으로 I형거더의 변형측정 가능성을 확인할 수 있었으며. 이 방법은 정밀안전진단과 인력점검의 대안적 방법이 될 수 있을 것이다.

Keywords

References

  1. 김병호 (2005), 철도교 설계현황 및 강교량 적용방안, 제1 4회 건설 해양분야 철강이용기술 발표회, http://www.ctn.or.kr/news/articleView.html?idxno=6487
  2. 박병욱 (1991), SPOT 위성데이터를 이용한 수치표고 모델 생성에 관한 연구, 박사학위논문, 서울대학교, pp. 1-137
  3. 서충인 (2006), 기존선 속도향상을 위한 판형교의 궤도구조 체결시스템 향상방안연구, 석사학위논문, 우송대학교, pp. 1-60
  4. 오재홍, 이창노, 어양담 (2006), 비측정용 디지털 카메라의 효율적인 자체 검정을 위한 대상지 구성, 한국측량학회지, 한국측량학회, 제 24권, 제 3호, pp. 677-685
  5. 윤태영, 이종관 (1999), 강도로교 피로설계요령, 한국강구조 학회논문집, 한국강구조학회, 제 11권, 제 1호,pp. 75-82
  6. 이효성 (2008), 사진측량용 이동식 표정판을 이용한 모형지반 변형량 측정, 한국측량학회지, 한국측량학회,제 26권, 제 4호, pp. 323-331
  7. 장동일, 이종득, 김성훈 (1999), 강철도교의 피로손상 증가, 한국강구조 학회논문집, 한국강구조학회, 제 3권,제 1호, pp. 173-181
  8. Albert, J., Maas, H-G., Schade, A. and Schwarz, W. (2002) Pilot studies on photogrammetric bridge deformation measurement, Proceedings of the 2nd IAG Commission IV Symposium on Geodesy for Geotechnical and Structural Engineering 21-24, Berlin, Germany
  9. Dold, J. (1998), The role of a digital intelligent camera in automating industrial photogrammetry, Photogrammetric Record, Vol. 16, No. 92, pp. 199-212 https://doi.org/10.1111/0031-868X.00121
  10. Maas, H-G. and Hampel, U. (2006), Photogrammetric techniques in civil engineering material testing and structure monitoring, Photogrammetric Engineering & Remote Sensing Vol. 72, No. 1, pp. 39-45 https://doi.org/10.14358/PERS.72.1.39
  11. Luhmann (2006), Close range photogrammetry principles, methods and applications, John Wiley & Sons Inc., New Yok, pp. 469-493
  12. Mikhail, E. M., Bethel, J. S. and McGlone, J. C. (2001), Introduction to modern photogrammetry, John Wiley & Sons Inc., New Yok, pp. 247-275
  13. Moffitt, F. H. and Mikhail, E. M. (1980), Photogrammetry, 3rd ed., Happer & Row, New Yok, pp. 442-445
  14. Jiang, R., J?uregui, D. V. and White, K. R. (2008), Closerange photogrammetry applications in bridge measurement: literature review, Journal of the International Measurement Confederation, Vol. 41, pp. 823-834 https://doi.org/10.1016/j.measurement.2007.12.005