Korean Journal of Materials Research (한국재료학회지)

Materials Research Society of Korea (한국재료학회)
권호 표지
DOI QR코드

DOI QR Code

Through-Thickness Variation of Strain and Microstructure of AA5052 with Rolling Conditions During High Speed Hot Rolling

고속열간압연시 압연조건에 따른 AA5052의 두께방향으로의 변형량 및 미세조직 변화

  • Lee, Seong-Hee (Department of Advanced Materials Science and Engineering, Mokpo National University)
  • Published : 2009.05.27
Download PDF
⟨ Previous Next ⟩

Abstract

The through-thickness variations of strain and microstructure during high-speed hot rolled 5052 aluminum alloy sheet were investigated. The specimens were rolled at temperature ranges from 410 to $560^{\circ}C$ at a rolling speed of 15 m/s without lubrication and quenched into water at an interval of 30 ms after rolling. The redundant shear strain induced by high friction between rolls and the aluminum sheet was increased largely beneath the surface at a rolling reduction above 50%. Dynamic recrystallization occurred in the surface regions of the specimen rolled under conditions of high temperatures or high rolling reductions.

Keywords

References

  1. W. C. Liu, B. Radhakrishnan, Z. Li and J. G. Morris, A472, 170 (2008)
  2. S. B. Kang and H. W. Kim, Bull. of the Kor. Inst. of Met. and Mat., 10, 761 (1997)
  3. H. S. Ko, S. B. Kang and H. W. Kim, J. of the Kor. Inst. of Met. and Mat., 35, 1699 (1997)
  4. J. K. Lee and D. N. Lee, Inter. J. of Mech. Sci., 50, 869 (2007) https://doi.org/10.1016/j.ijmecsci.2007.09.008
  5. H. Utsunomiya, T. Ueno and T. Sakai, Scrip. Mater., 57, 1109 (2007) https://doi.org/10.1016/j.scriptamat.2007.08.024
  6. I. L. Dilamore and W. T. Roberts, Acta. Mata., 12, 281 (1964) https://doi.org/10.1016/0001-6160(64)90204-4
  7. W. Truskowski, J. Krol and B. Major, Met. Trans., 11A, 749 (1980)
  8. T. Sakai, S. Hamada and Y. Saito, Pro. 6th Int. Conf. on Aluminum Alloys (ICAA-6), 1161 (1998)
  9. S. H. Lee and T. Sakai, Met. and Mater. -Int. 14, 263 (2008) https://doi.org/10.3365/met.mat.2008.04.263
  10. T. Sakai, Y. Saito and K. Kato, Trans. ISIJ, 27, 520 (1987) https://doi.org/10.2355/isijinternational1966.27.520
  11. S. H. Lee, Kor. J. Mater. Res., 18(9), 492 (2008) https://doi.org/10.3740/MRSK.2008.18.9.492
  12. M.F. Ashby, Phil. Mag., 21, 399 (1970) https://doi.org/10.1080/14786437008238426