Journal of the Korean Ceramic Society (한국세라믹학회지)

The Korean Ceramic Society (한국세라믹학회)
권호 표지
DOI QR코드

DOI QR Code

Porous Materials from Waste Bottle Glasses by Hydrothermal Treatment

수열처리에 의한 폐병유리의 다공질 재료화

  • Lim, Dong-Kyu (School of Nano & Advanced Material Science and Engineering, Engineering Research Institute Gyeongsang National University) ;
  • Kang, Eun-Tae (School of Nano & Advanced Material Science and Engineering, Engineering Research Institute Gyeongsang National University)
  • 임동규 (경상대학교 나노.신소재공학부) ;
  • 강은태 (경상대학교 나노.신소재공학부)
  • Published : 2009.05.31
Download PDF
⟨ Previous Next ⟩

Abstract

Porous materials were manufactured by hydrothermal treatment of waste bottle glass without foam agent. Factorial design was applied to analyze data by statistical methods and deal with the important factors for a process. The largest effect for porosity was for temperature of hydrothermal treatment. Amount of water and temperature-water interaction appeared to have little effect. The particle size of raw material was also identified as a major factor by one-way ANOVA and the porosity decreased as the size increased. The sintering temperature was not statistically significant for the porosity but was significant for the pore size. The porous material had compressive strength and thermal conductivity comparing with those of ALC (autoclaved lightweight concrete), although it has higher porosity than for ALC.

Keywords

References

  1. Korea Glass Industry Cooperative, http://www.glasskorea.org
  2. F. A. Sigoli, F. Feliciano, M. V. Gitto, M. R. Davolos, and M. J. Junior, 'Porous Silica Matrix Obtained from Pyrex Glass by Hydrothermal Treatment: Characterization and Nature of the Porosity,' J. Am. Ceram. Soc., 86 [7] 1196-201 (2003) https://doi.org/10.1111/j.1151-2916.2003.tb03447.x
  3. E. N. Boulos and N. J. Kreidl, 'Water in Glass : A Reiew,' J. Can. Ceram. Soc., 41 83-90 (1970)
  4. H. Scholze, 'Incorporation of Water in Glasses : I,' Glastech. Ber., 32 81-8 (1959)
  5. F. M. Ernsberger, 'Molecular Water in Glass,' Am. Ceram. Soc., 60 [1-2] 91-2 (1977) https://doi.org/10.1111/j.1151-2916.1977.tb16110.x
  6. M. Tomozawa, 'Water in Glass,' J. Non-Cryst. Solids, 73 197-204 (1985) https://doi.org/10.1016/0022-3093(85)90346-1
  7. R. F. Powell, 'A Realistic Approach to Laboratory Thermal Conductivity Experiments with Solids,' Phys. Educ., 4 199-203 (1969) https://doi.org/10.1088/0031-9120/4/4/302
  8. R. F. Bartholomew, B. L. Butler, H. L. Hoover, and C. K. Wu, 'Infrared Spectra of a Water-Containing Glass,' J. Am. Ceram. Soc., 63 [9-10] 481-85 (1980) https://doi.org/10.1111/j.1151-2916.1980.tb10748.x
  9. T. Uchino, T. Sakka, and M. Iwasaki, 'Interpretation of Hydrated States of Sodium Silicate Glasses by Infrared and Raman Analysis,' J. Am. Ceram. Soc., 74 [2] 306-13 (1991) https://doi.org/10.1111/j.1151-2916.1991.tb06880.x
  10. D. P. Zaburin, 'Infrared Spectra of Hydrogen Bonded Hydroxyl Groups in Silicate Glasses. A Re-interpretation,' Phys. Chem. Glasses, 40 [4] 184-92 (1999)
  11. G. W. Morey and N. L. Bowen, 'High $SiO_2$ Corner of System $Na_2$O-CaO-SiO$_2$,' J. Soc. Glass Technol., 9 232-33 (1925)
  12. D. M. Liu, 'Influence of Porosity and Pore Size on the Compressive Strength of Porous Hydroxyapatite Ceramic,' Ceramics International, 23 [2] 135-39 (1997) https://doi.org/10.1016/S0272-8842(96)00009-0
  13. G. Buntebarth and J. R. Schopper, 'Experimental and Theoretical Investigations on the Influence of Fluids, Solids and Interactions Between them on Thermal Properties of Porous Rocks,' Phys. Chem. Earth, 23 1141-46 (1997) https://doi.org/10.1016/S0079-1946(98)00142-6

Cited by

  1. Effect of Clay-Mineral Composition on Flexural Strength of Clay-based Membranes vol.51, pp.5, 2014, https://doi.org/10.4191/kcers.2014.51.5.380
  2. Effect of Alkaline-Earth Oxide Additives on Flexural Strength of Clay-Based Membrane Supports vol.52, pp.3, 2015, https://doi.org/10.4191/kcers.2015.52.3.180