Hybrid Motion Blending Algorithm of 3-Axis SCARA Robot based on $Labview^{(R)}$ using Parametric Interpolation

매개변수를 이용한 $Labview^{(R)}$ 기반의 3축 SCARA로봇의 이종모션 제어 알고리즘

  • Published : 2009.04.15

Abstract

In order to implement continuous-path motion on a robot, it is necessary to blend one joint motion to another joint motion near a via point in a trapezoidal form of joint velocity. First, the velocity superposition using parametric interpolation is proposed. Hybrid motion blending is defined as the blending of different two type's motions such as blending of joint motion with linear motion, in the neighborhood of a via point. Second, hybrid motion blending algorithm is proposed based on velocity superposition using parametric interpolation. By using a 3-axis SCARA (Selective Compliance Assembly Robot Arm) robot with $LabVIEW^{(R)}$ $controller^{(1)}$, the velocity superposition algorithm using parametric interpolation is shown to result in less vibration, compared with PTP(Point- To-Point) motion and Kim's algorithm. Moreover, the hybrid motion $algorithm^{(2)}$ is implemented on the robot using $LabVIEW^{(R)(1)}$ programming, which is confirmed by showing the end-effector path of joint-linear hybrid motion.

Keywords

References

  1. Kim, D. Y., "Development of a new weaving Algorithm using a Bezier Spline and A study on the Realization of CP (Continuous Path) Motion with Jerk Continuity," Master of Engineering treatise, Changwon National University, Republic of Korea.
  2. National Instruments, 2002, LabVIEW Motion control Fundamentals, Republic of Korea.
  3. National Instruments, 2004, LabVIEW Fundamentals, Republic of Korea.
  4. Fu, K. S. Gonzalez, R. C., and Lee, C.S.G, 1987, Robotics, McGraw-Hill, New York, pp. 163-189.
  5. Ju, J. H., "Monte-Carlo Simulation Technique for Error Analysis of 3-axis SCARA Robot using Observability," Journal of the KSMTE, Vol. 17, No. 4, pp. 8-14.
  6. Kim, J. H., "Prototyping and Visualization Techniques of 3-axis SCARA Robot Using DOE and $LabVIEW{\circledR}$," Journal of the KSMTE, Vol. 17, No. 3, pp. 40-46.
  7. Kim, J. H., "Prototyping and Visualization Techniques of 3-axis SCARA Robot Using DOE and $LabVIEW{\circledR}$," Journal of the KSMTE, Vol. 17, No. 3, pp. 40-46.
  8. Shin, W. J., "A Study on the Error Compensation of Three-DOF Translational Parallel Manipulator", Journal of the KSMTE, Vol. 13, No. 3, pp. 44-52.
  9. Thomas, M. and Tesar, D., 1982, "Dynamic Modeling of Serial Manipulator Arms," Transactions of the ASME, Vol. 104, pp. 218-228. https://doi.org/10.1115/1.3256313