Transactions of the Korean Society of Machine Tool Engineers (한국공작기계학회논문집)

The Korean Society of Manufacturing Technology Engineers (한국생산제조학회)
권호 표지

A Study on Analysis of Dynamic Characteristics and Evaluation of Dynamic Compliance of a 5-Axis Multi-tasking Machine Tool by Using F.E.M and Exciter Test

유한요소법과 가진시험법을 이용한 다기능 5축 복합가공기의 동특성 해석 및 동적 컴플라이언스 평가에 관한 연구

  • 장성현 (창원대학교 기계설계공학과) ;
  • 최영휴 (창원대학교 메카트로닉스공학부) ;
  • 하종식 (한국정밀기계(주))
  • Published : 2009.04.15
Download PDF
⟨ Previous Next ⟩

Abstract

This paper describes a study on dynamic characteristics analysis and dynamic compliance evaluation of a 5-axis multi-tasking machine tool of ram-head type. Structural dynamics analysis and evaluation are necessary to machine tool design and development to secure good machine tool performance against tough and harsh machining conditions. In this study, natural frequencies and corresponding vibration modes of the machine tool structure were analyzed by using both F.E.M. modal analysis and impulse hammer test. Furthermore, dynamic compliance of the machine tool was analyzed by using F.E.M. and also measured by using a hydraulic exciter test. Both the theoretical analysis and experimental test results showed good agreement with each other.

Keywords

References

  1. Choi, Y. H., Jang, S. H., Park, H. M., Jang, S. J., and Cho, Y. J., 2005, "A Genetic Algorithm Based Multi-step Design Optimization of a Machine Structure for Minimum Weight and Compliance," Proc. of SICE 2005, pp. 476-481.
  2. Choi, Y. H., Jang, S. H., Kim, I. S., Cho, Y. J., and Oh, C. W., 2006, "Structural Design Optimization of Multi-tasking Machine with 5-Axes," Proc. of Korean Society of Machine Tool Engineer Conference, pp. 215-220.
  3. Kim, S. G., Jang, S. H., Hwang, H. Y., Choi, Y. H., and Ha, J. S., 2004, "Analysis of Dynamic Characteristics and Evaluation of Dynamic Stiffness of a 5-Axis Multi-tasking Machine Tool by using F.E.M and Exciter Test," Proc. of ICSMA, pp. 565-569.
  4. Tobias, S. A., 1965, Machine Tool Vibrations, Wiley, New York.
  5. Koenigsberger, F. and Tlusty, J., 1970, Machine Tool Structure, Pergamon Press, Oxford.
  6. Weck, M. and Teipel, K., 1984, Handbook of Machine Tools, Wiley, New York.
  7. Ewins, D. J., 1986, Modal Testing: Theory, Practice and Application, Research Studies Press, London, pp. 49-64.
  8. Weck, M. and Eckstein, R., 1987, "An Examination Technique to Determine Static Weakpoints of Machine Tools," Annals of the CIRP, Vol. 36, No.1, pp. 257-261. https://doi.org/10.1016/S0007-8506(07)62599-2
  9. Xu, M. and Birchmeier, J. R., 1977, "Dynamic Stiffness Testing and its Applications in Machine Tool," Journal of Sound and Vibration, Vol. 31, pp. 8-21.
  10. Eun, I. U., 2000, "Development of Static and Dynamic Behavior of Machine Tools in the Period from 1980-1990," Handout of RRC Seminar in Changwon National University.