Transactions of the Korean Society of Machine Tool Engineers (한국공작기계학회논문집)

The Korean Society of Manufacturing Technology Engineers (한국생산제조학회)
권호 표지

Quality Control System Based on Cbm in Injection Molding Product

CBM 기반의 사출품 품질 관리 시스템

  • 박홍석 (울산대학교 기계자동차공학) ;
  • 김종수 (울산대 기계자동차공학)
  • Published : 2009.04.15
Download PDF
⟨ Previous Next ⟩

Abstract

Most of automotive plastic parts are injection molding products. Inspection of total product is impossible, because number of product to inspect is too many and various. Condition-based Monitoring was proposed to decrease cost and time for inspecting. In this research, a system that predicts quality of part at fabrication point of time, and confirms informations through the internet was developed. Cavity sensors were installed inside of mold, and gathered signals as measuring, and through this process Sensor-based Monitoring system can be observed manufacturing of a part. Monitoring system transmits signals to client through the internet, and finally developed system provides manufacturing informations and predictions of quality as web-based monitoring.

Keywords

References

  1. Park, H. S., 2007, "Advancement in Injection moulding Technology," Technical paper in 40th CIRP INTERNATIONAL SEMINAR on MANUFACTURING SYSTEMS, Liverpool, UK.
  2. Bengtsson, M., Olsson, E., Funk, P., and Jackson, M., 2004, "Technical Design of Condition Based Maintenance Systems - A Case Study using Sound Analysis and Case-Based Reasoning," The 8th Conference of Maintenance and Reliability, Knoxville, USA.
  3. Wang, L. and Gao, R. X., 2006, Condition monitoring and control for intelligent manufacturing, Springer-Verlag, New York.
  4. Min, H. S., Lee, S. H., and Ahn, S. E., 2002, "Monitoring of Laser Fusion Cutting Using Acoustic Emission," Transactions of the Korean Society of Machine Tool Engineers, Vol. 11, No. 3, pp. 39-44.
  5. Jeon, B. C., Shin, B. C., Choi, J. H., and Cho, M. W., 2006, "A Study of the Web based Process Monitoring and Control System Development for Mold Manufacturing Process," Korean Society of Machine Tool Engineers Spring Conference 2006, pp. 372-378.
  6. Kothamasu, R., Huang, S. H., and VerDuin, W. H., 2006, "System health monitoring and prognostics - a review of current paradigms and practices," Int J. Adv. Manuf. Technol., Vol. 28, pp. 1012-1022. https://doi.org/10.1007/s00170-004-2131-6
  7. Bengtsson, M., 2003, "Standardization Issues in Condition Based Maintenance," The 16th Conference of Condition Monitoring and Diagnostic Engineering Management, Sweden, Vaxjo:Vaxjo University Press.
  8. Bengtssonon, M., 2007, Condition based maintenance and its implementation in industrial settings, Ph.D. thesis, Malardalen university, Sweden.
  9. Bengtsson, M., 2004, "Condition Based Maintenance Systems Technology - Where is Development Heading-" The 17th Conference of Euromaintenance, Spain, Barcelona: Puntex-Publicaciones.
  10. Golden, B. L., Wasil, E. A., and Harker, P. T., 1989, The Analytic Hierarchy Process, Application and Studies, Springer-Verlag, New York.