Die Surface Texturing by Femtosecond Laser for Friction Reduction

펨토초레이저를 이용한 알루미늄 성형다이의 미세가공에 관한 연구

  • 최해운 (계명대학교 기계자동차공학부) ;
  • 신현명 (계명대학교 기계자동차공학부)
  • Published : 2009.05.01

Abstract

Interface friction in blanking dies, cold forging and extrusion of aluminum alloys is a major cause of inefficient process. This paper describes an investigation of femtosecond laser texturing for reduction of interface friction on sliding surfaces in forming process. Femtosecond direct writing technology was used to fabricate a laser micro-machined die and to create microgroove patterns with varying size and density on metal forming dies. A systematic approach to find the optimum parameters and computer simulation comparison of friction coefficients are provided to study the relation of friction coefficients and die profiles. In metal forming tests, the effectiveness of various laser-machined patterns for enhancing interface lubrication is determined.

Keywords

References

  1. Etsion, I., "State of the Art in Laser Surface Texturing," J. of Tribology, No. 127, Issue 1, pp. 248-253, 2005 https://doi.org/10.1115/1.1828070
  2. Richter, K. and Bart G., "Excimer laser treatment of engine bearing surfaces such as cylinders," General Motors, United States Patent, No. 5072092, 1991
  3. Herbst, L., Lindner, H. and Hoult, T., "An Important Novel Application for Excimer lasers in the Automotive industry," Proc. of ICALEO, 2004
  4. Barber, G., Gao, H. and Tung, S., "Experimental study on the friction characteristics of lasertex steel sheets during metal forming process," TribologyTrans., Vol. 48, No. 2, pp. 245-249, 2005 https://doi.org/10.1080/05698190590929099
  5. Bay, N., "Cold forging of aluminium-state of art," J. Mater. Proc. Tech., Vol. 71, No. 1, p. 76, 1997 https://doi.org/10.1016/S0924-0136(97)00152-0
  6. Geiger, M., Popp, U. and Engel, U., "Excimer Laser Micro Texturing of Cold Forging Tool Surfaces-Influence on Tool Life," Annals of the ClRPManufacturingTechnology, Vol. 51, No. 1, pp. 231-234, 2002 https://doi.org/10.1016/S0007-8506(07)61506-6
  7. Chichkov, B., Momma, C., Nolte, S., Alvensleben, F. and Tunnermann, A., "Femtosecond, picosecond and nanosecond laser ablation of solids," Applied Physics A: Materails Science & Processing, Vol. 63, No. 2, pp. 109-115, 1996 https://doi.org/10.1007/BF01567637
  8. Farson, D., Choi, H., Lu, C. and Lee, L., "Femtosecond laser bulk micromachining of microfluid channels in poly(methylmethacrylate)," Journal of Laser Applications, Vol. 18, No. 3, pp. 210-215, 2006 https://doi.org/10.2351/1.2227015