한국정밀공학회지 (Journal of the Korean Society for Precision Engineering)

  • 제26권5호
  • /
  • Pages.57-63
  • /
  • 2009
  • /
  • 1225-9071(pISSN)
  • /
  • 2287-8769(eISSN)
한국정밀공학회 (Korean Society for Precision Engineering)
권호 표지

펨토초레이저를 이용한 알루미늄 성형다이의 미세가공에 관한 연구

Die Surface Texturing by Femtosecond Laser for Friction Reduction

  • 최해운 (계명대학교 기계자동차공학부) ;
  • 신현명 (계명대학교 기계자동차공학부)
  • 발행 : 2009.05.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Interface friction in blanking dies, cold forging and extrusion of aluminum alloys is a major cause of inefficient process. This paper describes an investigation of femtosecond laser texturing for reduction of interface friction on sliding surfaces in forming process. Femtosecond direct writing technology was used to fabricate a laser micro-machined die and to create microgroove patterns with varying size and density on metal forming dies. A systematic approach to find the optimum parameters and computer simulation comparison of friction coefficients are provided to study the relation of friction coefficients and die profiles. In metal forming tests, the effectiveness of various laser-machined patterns for enhancing interface lubrication is determined.

키워드

참고문헌

  1. Etsion, I., "State of the Art in Laser Surface Texturing," J. of Tribology, No. 127, Issue 1, pp. 248-253, 2005 https://doi.org/10.1115/1.1828070
  2. Richter, K. and Bart G., "Excimer laser treatment of engine bearing surfaces such as cylinders," General Motors, United States Patent, No. 5072092, 1991
  3. Herbst, L., Lindner, H. and Hoult, T., "An Important Novel Application for Excimer lasers in the Automotive industry," Proc. of ICALEO, 2004
  4. Barber, G., Gao, H. and Tung, S., "Experimental study on the friction characteristics of lasertex steel sheets during metal forming process," TribologyTrans., Vol. 48, No. 2, pp. 245-249, 2005 https://doi.org/10.1080/05698190590929099
  5. Bay, N., "Cold forging of aluminium-state of art," J. Mater. Proc. Tech., Vol. 71, No. 1, p. 76, 1997 https://doi.org/10.1016/S0924-0136(97)00152-0
  6. Geiger, M., Popp, U. and Engel, U., "Excimer Laser Micro Texturing of Cold Forging Tool Surfaces-Influence on Tool Life," Annals of the ClRPManufacturingTechnology, Vol. 51, No. 1, pp. 231-234, 2002 https://doi.org/10.1016/S0007-8506(07)61506-6
  7. Chichkov, B., Momma, C., Nolte, S., Alvensleben, F. and Tunnermann, A., "Femtosecond, picosecond and nanosecond laser ablation of solids," Applied Physics A: Materails Science & Processing, Vol. 63, No. 2, pp. 109-115, 1996 https://doi.org/10.1007/BF01567637
  8. Farson, D., Choi, H., Lu, C. and Lee, L., "Femtosecond laser bulk micromachining of microfluid channels in poly(methylmethacrylate)," Journal of Laser Applications, Vol. 18, No. 3, pp. 210-215, 2006 https://doi.org/10.2351/1.2227015