Communications for Statistical Applications and Methods

The Korean Statistical Society (한국통계학회)
권호 표지
DOI QR코드

DOI QR Code

A Readjustment Procedure after Signalling in the Integrated Process Control

통합공정관리에서 재수정 절차

  • 박창순 (중앙대학교 수학통계학부) ;
  • 이재헌 (중앙대학교 수학통계학부)
  • Published : 2009.05.31
Download PDF
⟨ Previous Next ⟩

Abstract

This paper considers the integrated process control procedure for detecting special causes in an IMA(1,1) process that is being adjusted automatically after each observation using a minimum mean squared error adjustment policy. When the control chart signals after the occurrence of a special cause, the special cause will be detected and eliminated from the process by the rectifying action. However, when the elimination of the special cause costs high or is not practically possible, an alternative action is to readjust the process with appropriately modified adjustment scheme. In this paper, we propose the readjustment procedure after having a true signal, and show that the use of the readjustment can reduce the deviation of a process from the target.

통합공정관리의 기본절차는 잡음이 내재하는 공정에 수정조치를 취하여 공정 편차를 백색잡음으로 전환하도록 하여 공정제곱편차를 최소화하게 된다. 이러한 수정활동 중 공정에 이상원인이 발생하면 관리도를 통하여 이를 탐지하고 제거하게 된다. 수정된 공정은 이상원인 발생 전에는 백색잡음이 되지만, 이상원인 발생 후에는 다양한 형태의 시계열 모형으로 변환하게 된다. 만일 수정된 공정을 탐지하여 이상원인의 신호가 있을 경우 교정활동을 통하여 이를 제거해야 하지만, 교정활동의 비용이 많이 발생하거나 또는 구조적으로 이를 제거할 수 없는 경우에는 이상원인의 효과를 감안하여 수정활동을 재조정해야 할 것이다. 이 논문에서는 공정모형으로 IMA(1,1) 모형을 가정하고 통합공정관리 절차를 수행하는 경우, 이상신호 발생 후 재수정 절차를 제안한다.

Keywords

References

  1. Box, G. E. P. and Kramer, T. (1992). Statistical process control and feedback adjustment - A discussion, Technometrics, 34, 251-285 https://doi.org/10.2307/1270028
  2. Del Castillo, E. (2002). Statistical Process Adjustment for Quality Control, John Wiley & Sons, New York
  3. Jiang, W. (2004). A joint monitoring scheme for automatically controlled processes, lIE Transactions, 36, 1201-1210 https://doi.org/10.1080/07408170490507828
  4. Montgomery, D. C. (1999). A perspective on models and the quality sciences: Some challenges and future directions, ASQ Statistics Division Newsletter, 18, 8-13
  5. Nembhard, H. B. and Chen, S. (2007). Cuscore control charts for generalized feedback-control systems, Quality and Reliability Engineering International, 23, 483-502 https://doi.org/10.1002/qre.831
  6. Pan, R. and Del Castillo, E. (2003). Integration of sequential process adjustment and process monitoring techniques, Quality and Reliability Engineering International, 19, 371-386 https://doi.org/10.1002/qre.590
  7. Park, C. (2007). An algorithm for the properties of the integrated process control with bounded adjustments and EWMA monitoring, International Journal of Production Research, 45, 5571-5587 https://doi.org/10.1080/00207540701325397
  8. Park, C. and Lee, J. (2008). An integrated process control scheme based on the future loss, The Korean Journal of Applied Statistics, 21, 247-264 https://doi.org/10.5351/KJAS.2008.21.2.247
  9. Park, C. and Reynolds, M. Jr. (2008). Economic design of an integrated process control procedure with repeated adjustments and EWMA monitoring, Journal of the Korean Statistical Society, 37, 155-174 https://doi.org/10.1016/j.jkss.2007.10.005
  10. Runger, G., Testik, M. C. and Tsung, F. (2006), Relationships among control charts used with feedback control, Quality and Reliability Engineering International, 22, 877-887 https://doi.org/10.1002/qre.774
  11. Vander Wiel, S. A. (1996). Monitoring processes that wander using integrated moving average models, Technometrics, 38, 139-151 https://doi.org/10.2307/1270407

Cited by

  1. Parameter estimation in a readjustment procedure in the multivariate integrated process control vol.24, pp.6, 2013, https://doi.org/10.7465/jkdi.2013.24.6.1275