Analysis of EMI Between Overlapped Railway Signalling Systems and Its Countermeasure

철도신호시스템 중첩운영으로 인한 전자파장해현상 분석 및 대책

  • 고영환 (서울메트로 신호팀) ;
  • 윤선호 (서울산업대 철도전기신호공학과) ;
  • 최규형 (서울산업대 철도전기신호공학과)
  • Published : 2009.06.01

Abstract

ATS(Automatic Train Stop) system makes train stop when it runs over the speed limit and ensure the safe operation of train. Seoul Metro line 2 in Korea, which started its passenger service in 1982, has adopted ATS system for its signaling system. The ATS system has only a train stop function at the time of emergency, and Seoul Metro is planning to replaced them with ATC(Automatic Train Control)/ATO(Automatic Train Operation) system which can provide the dedicated speed control for headway reduction and automatic operation of train. Until all the ATS system is replaced with the new ATC system, both systems are to operate simultaneously at the same metro line. In this situation, ATS system sometimes reveals improper operation: train stops suddenly without any obstacles in front of it. These emergency stops cause interruption of passenger service, and abnormal abrasion of wheels and rail. This paper makes it clear that these interruptions are caused by EMI phenomena between ATS on-board device and ATC wayside device : Signal current flowing in AF track circuit of ATC is turn out to be a EMI source that prevent normal operation of the ATS on-board device. Although the two systems have different frequency-ranges (ATS system has frequency range between $78{\sim}130$[kHz] and ATC system has frequency range between $9.5{\sim}16.5$[kHz]), it turned out that EMI phenomena appears between the both systems. This is investigated by measuring the output signal from ATS on-board device passing over ATC wayside device. The FFT(Fast Fourier Transform) analysis of the signal reveals that AF track circuit signal is transmitted to the ATS on-board device and induce noise causing improper operation. The countermeasures to the EMI phenomena are examined in three ways; blocking EMI transmission, enforcement of EMS (Electromagnetic Susceptibility) of ATS on-board device, and blocking the EMI source. It is suggested that the practical solution be blocking EMI source temporarily, that is breaking AF track circuit signal when the trains with ATS on-board device pass over it. To this purpose, TODS(Train Occupation Detection System) is developed, and has made a success in preventing the EMI problem of Seoul Metro line 2.

Keywords

References

  1. T. Takashige, 'Signalling Systems for Safe Railway Transport', Japan Railway & Transportation Review vol. 21, pp.44-52, 1999
  2. F. Guenab, J. L. Boulanger, W. Schon, 'Safety of Railway Control System : A Preliminary Risk Analysis Approach', IEEE International Conference on Industrial Engineering and Engineering Management, Singapore, 2008 https://doi.org/10.1109/IEEM.2008.4738082
  3. H. Arai, K. Sato, 'Investigation of the Safety of Automatic Train Stop System', RTRI Report vol.l4, no.2, 2000, pp.35-40
  4. M. Matsumoto, 'The Revolution of Train Control System in Japan', Proc. of 7th ISADS, 2005, pp.599-606 https://doi.org/10.1109/ISADS.2005.1452145
  5. T. Takashige, 'Overview of Recent Signalling and Telecommunications Technologies', Quarterly Report of RTRI, vol.43, no.4, 2002, pp.153-154 https://doi.org/10.2219/rtriqr.43.153
  6. T. Kiyoshi, H. Nakamura, 'Automatic protection system depending on data oriented control method', Proceedings of IEEE Railroad Conference, Pittsbirg USA, 1993, pp.51-57 https://doi.org/10.1109/RRCON.1993.292963
  7. N. Watanabe, 'Curent Status and vision of automatic train operation at urban transit', IEEJ Journal vol. 123, no. 1, 2003. pp.24-27 https://doi.org/10.1541/ieejjournal.123.24
  8. 정락교 외, '서울메트로 2호선 ATP/ATO 차량도입에 따른 기존 신호설비와의 적합성검토'. 한국철도기술연구원 보고서, 2008
  9. H. Arai, S. Okamoto, 'Development of the compact maintenance system for railway signalling equipment using the multiplex system and FFT analysis', International Conference on Developments in Mass Transit Systems Conf. Publ. No. 453, 1998, pp.184-189
  10. 고영환, 최규형, '신호장치에 의한 ATS 오동작 방지에 대한 연구', 한국철도학회 추계학술대회 논문집, 2007
  11. K. Mabe, K. Sato, M. Fukuda, S. Takahashi, 'Development of new on board speed checking type ATS', Tetsudo Saibane, Shinpojiumu Ronbunshu, vol.39, no.1, 2002, pp.1-4
  12. E. H. Armstrong, 'The Super-Heterodyne-its Origin, Development, and Some Recent Improvements', Proc. of the IRE, vol.12, no.5, 1924, pp.539-552 https://doi.org/10.1109/JRPROC.1924.219990
  13. P. F. Weston, J. Chen, E. Stewart, S. Roberts, 'Condition Monitoring of Audio Frequency Track Circuits', International Conference on Railway Engineering, 2008, pp.1-6
  14. R. T. Sewell, 'Evolution of Electronics in railway signaling from the track circuit standpoint', IEEE 35th Vehicular Technology Conference, Vol. 35, May 1985, pp.292- 298
  15. K. Heummer, 'Interference-free Track Vacancy Detection', International Conference on Mainline Railway Electrification, York. UK, pp. 47-52, 1999
  16. E. H. Armstrong, 'Some Hecent Developments of Regenerative Circuits', Proc. of the IRE, vol.10, no.4, 1922, pp.244-260 https://doi.org/10.1109/JRPROC.1922.219822