한국생산제조학회지 (Journal of the Korean Society of Manufacturing Technology Engineers)

  • 제18권3호
  • /
  • Pages.270-278
  • /
  • 2009
  • /
  • 2508-5093(pISSN)
  • /
  • 2508-5107(eISSN)
한국생산제조학회 (The Korean Society of Manufacturing Technology Engineers)
권호 표지

A6061-T6과 A5052-H32재의 이종 마찰교반용접시 핀 형상이 기계적 강도에 미치는 영향에 관한 연구

A Study on the Effect that Pin Shape on Mechanical Strength in Dissimilar Friction Stir Welding A6061-T6 and A5052-H32

  • 박희상 (한국표준과학연구원 안전그룹) ;
  • 최원두 (충남대학교 기계공학과 대학원) ;
  • 고준빈 (한밭대학교 기계설계공학과) ;
  • 이영호 (충남대학교 기계공학과 대학원) ;
  • 신기석 (충남대학교 기계공학과 대학원) ;
  • 김인철 (충남대학교 기계공학과 대학원) ;
  • 최만용 (한국표준과학연구원 안전그룹)
  • 발행 : 2009.06.15
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Friction stir welding is a relatively new solid state joining process. A6061-T6 and A5052-H32 aluminium alloy has gathered wide acceptance in the fabrication of light weight structures requiring a high strength to weight ratio and good corrosion resistance. This friction stir process uses a non-consumable tool to generate frictional heat in the abutting surfaces. The welding parameters such as tool rotational speed, welding speed, etc., and tool pin profile play a major role in deciding FSP zone formation in A6061-T6 and A5052-H32 aluminium alloy. Three different tool pin profiles have been used to fabricate the dissimilar butt joints. The formation of friction stir processed zone has been analysed macroscopically. Tensile properties of the joints have been evaluated and correlated with the friction stir processed zone formation.

키워드

참고문헌

  1. Kallee, S. and Nichola, D., 1998, "Application of Friction Stir Welding to Lightweight Vehicles," Proc. of IBEC 98, Detroit, Michigan, 29 sept-1 OCt., SAE, pp. 330-335
  2. Arbegast, W. J. and Hartley, P., 1999, "Friction stir weld technology development at Lockheed Martin Michoud Space System -an overview," Proc. Intl. Conf. on Trends in Welding Research, eds. J. M. Vitek, S.A. David, J.A. Johnson, H.B. Smartt and T. Deb-roy, ASM International, Materials Park, Ohio, pp. 541-546.
  3. Chang, W. S., Choi, K. Y, Kim, S. H., and Kweon, Y. G., 2001, "Some Aspects of Friction Stir Welding and Its Application Technologies," Journal of Korean Welding Society, Vol. 19, No.6, pp. 7-15.
  4. Thomas, W. M. et, 1991, "Friction Stir Butt Welding," International Patent Application No. PCT/GB92 Patent Application No. 9125978.8.
  5. Dawes, C. J., 1995, "An introduction to friction stir welding and its development," Welding and Metal Fabrication, Vol. 63, No. 1, pp. 13-14.
  6. Dawes C. J, and Thomas, W. M., 1996, "Friction stir process welds aluminum alloys," Welding Journal USA., Vol. 75, No.3, pp. 41-45.
  7. Bangg, K, S., Lee, W. B., Yeon, Y. M., and Jeung, S. B., 2002, "Study on properties of joints of dissimilar materials Al(5083)/Al(6005) by FSW," The korean Welding Society, Priceedings of the Korean Welding Society Conference, pp. I09-111.
  8. Kim, H. J., Cheon, C. K., Kim, S. H., and Chang, W. S., 2006, "Microstructures and Mechanical Properties of the Friction Stir Welded Dissimilar joint of AZ31B/A6061," Journal of Korean Welding Society, Vol. 34, No.4, pp. 6-10.
  9. Shigematusu, J., Kwon, Y. J., Suzuki, K., lmai, T., and Sito, N., 2003, "Joining of 5083 and 6061 aluminum alloys by friction stir welding," Journal of Materials Science Letters, Vol. 22, No.5, pp. 353-356.
  10. Park, H. S., Lee, Y. H., Choi, W. D., and Ko, J. B., 2008, "A study on the effect that pin shape and welding speed have an influence on mechanical strength in friction stir welding A16061-T6," Journal of the Korean Society of Machine Tool Engineers, Vol. 17, No.4, pp. 22-28.
  11. Rajesh, S. R., Bang, H. S., Chang, W. S., Kim, H. J., Oh, C. I., and Chu, J. S., 2007, "Numerical determination of residual stress in friction stir weld using 3D-analytical model of stir zone," Journal of Materials Processing Technology, Vol. 187-188, pp. 224-226.
  12. Lee, W. B., Kim, S. W., Lee, C. Y., and Cheng, S. B., 2004, "Effect of Welding Parameters on the Friction Stir Weld ability of 5052 Al alloy," Journal of Korean Welding Society, Vol. 22, No.3, pp. 69-76.
  13. Jang, S. K., 2003, "An experimental study on lap joint using FSW with 2mmt Aluminum Alloy plate," Journal of the Korean Society of Marine Engineers, Vol. 27, No.6, pp. 728-735.