DOI QR코드

DOI QR Code

Experimental study of moment redistribution and load carrying capacity of externally prestressed continuous composite beams

  • Chen, Shiming (School of Civil Engineering, Tongji University) ;
  • Jia, Yuanlin (School of Civil Engineering, Tongji University) ;
  • Wang, Xindi (School of Civil Engineering, Tongji University)
  • Received : 2008.07.07
  • Accepted : 2009.03.03
  • Published : 2009.03.30

Abstract

A comparative experimental study of prestressed continuous steel-concrete composite beams was carried out. Two continuous composite beams were tested, one of which was plain continuous steel-concrete composite beam, while the other was a composite beam prestressed with external tendons. Cracking behavior and the load carrying capacity of the beams were investigated experimentally. Full plasticity was developed in the mid-span section each beam, the maximum moments attained at the internal support sections however were governed by local buckling which was related to the slenderness of composite section. It was found that in hogging moment regions, the ultimate resistance of an externally prestressed composite beam would be governed by either distortional lateral buckling or local buckling, or interactive mode of these two buckling patterns. The results show that exerting prestressing on a continuous composite beam with external tendons will increase the extent of internal force and moment redistribution in the beam. The influences of local and distortional buckling on the behaviors of the composite continuous beams are discussed. The Moment redistribution and the load carrying capacity of the prestressed continuous composite beams are evaluated, and it is found that at the ultimate state, the moment redistribution in the prestrssed continuous composite beams is greater than that in non-prestressed composite beams.

Keywords

Acknowledgement

Supported by : National Science Foundation of China

References

  1. Ayyub, B.M., Sohn, Y.G. and Saadatmanesh, H. (1990), 'Prestressed composite girders under positive moment', J. Struct. Eng., 116(11), 2931-2951 https://doi.org/10.1061/(ASCE)0733-9445(1990)116:11(2931)
  2. Ayyub, B.M., Sohn, Y.G. and Saadatmanesh, H. (1992), 'Prestressed composite girders I: Experimental study for negative moment', J. Struct. Eng, 118(10), 2743-2762 https://doi.org/10.1061/(ASCE)0733-9445(1992)118:10(2743)
  3. Ayyub, B.M., Sohn, Y.G. and Saadatmanesh, H. (1992), 'Prestressed composite girders II: Analytical study for negative moment', J. Struct. Eng., 118(10), 2763-2783 https://doi.org/10.1061/(ASCE)0733-9445(1992)118:10(2763)
  4. Chen, S. (2005), 'Experimental study of prestressed steel-concrete composite beams with external tendons for negative moment', J. Constr. Steel Res., 61(12), 1613-1630 https://doi.org/10.1016/j.jcsr.2005.05.005
  5. Chen, S. (2006), 'Discussion of Finite element model for externally prestressed composite beams with deformable connection', J. Struct. Eng., 132(12), 2036-2038 https://doi.org/10.1061/(ASCE)0733-9445(2006)132:12(2036)
  6. Chen, S. and Gu, P. (2005), 'Load carrying capacity of composite beams prestressed with external tendons under positive moment', J. Constr. Steel Res., 61(4), 515-530 https://doi.org/10.1016/j.jcsr.2004.09.004
  7. Chen, S. and Zhang, Z. (2006), 'Effective width of a concrete slab in steel-concrete composite beams prestressed with external tendons', J. Constr. Steel Res., 62(5), 493-500 https://doi.org/10.1016/j.jcsr.2005.08.009
  8. Dall'Asta1, A. and Zona, A. (2005), 'Finite element model for externally prestressed composite beams with deformable connection', J. Struct. Eng., 131(5), 706-714 https://doi.org/10.1061/(ASCE)0733-9445(2005)131:5(706)
  9. European Committee for Standarisation. Eurocode 4 Design of composite steel and concrete structures. Part 1.1: General rules and rules for buildings, CEN, Brussels, ENV1994-1-1
  10. Lorenc, W. and Kubica, E. (2006), 'Behavior of composite beams prestressed with external tendons: Experimental study', J. Constr. Steel Res., 62(12), 1353-1366 https://doi.org/10.1016/j.jcsr.2006.01.007
  11. Nie, J.G., Cai, C.S., Zhou, T.R. and Li, Y. (2007), 'Experimental and analytical study of prestressed steelconcrete composite beams considering slip effect', J. Struct. Eng., 133(4), 530-540 https://doi.org/10.1061/(ASCE)0733-9445(2007)133:4(530)
  12. Saadatamanesh, H., Albrecht, P. and Ayyub, B.M. (1989), 'Experimental study of prestressed composite beams', J. Struct. Eng., 115(9), 2348-2363 https://doi.org/10.1061/(ASCE)0733-9445(1989)115:9(2348)
  13. Uy, B. and Craine, S. (2004), 'Static flexural behavior of externally post-tensioned steel-concrete composite beams', Adv. Struct. Eng., 7(1), 1-20 https://doi.org/10.1260/136943304322985729
  14. Xue, W., Ding, M., He, C. and Li, J. (2008), 'Long-term behavior of prestressed composite beams at service loads for one year', J. Struct. Eng., 134(6), 930-937 https://doi.org/10.1061/(ASCE)0733-9445(2008)134:6(930)
  15. Zona, A., Ragni, L. and Dall'Asta, A. (2009), 'Simplified method for the analysis of externally prestressed steelconcrete composite beams', J. Constr. Steel Res., 65(2), 308-313 https://doi.org/10.1016/j.jcsr.2008.07.015
  16. Zong, Z. et al. (2002), 'Experimental study of external prestressed steel-concrete composite continuous beams', China J. Highway Transport, 15(1), 44-49

Cited by

  1. Numerical simulation of an external prestressing technique for prestressed concrete end block vol.33, pp.5, 2009, https://doi.org/10.12989/sem.2009.33.5.605
  2. Development and Evaluation of New Connection Systems for Hybrid Truss Bridges vol.11, pp.2, 2013, https://doi.org/10.3151/jact.11.61
  3. Mechanical Performance of Steel-Concrete Composite Beams Subjected to a Hogging Moment vol.140, pp.1, 2014, https://doi.org/10.1061/(ASCE)ST.1943-541X.0000800
  4. Experimental and numerical studies of continuous composite beams taking into consideration slab cracking vol.18, pp.4, 2016, https://doi.org/10.17531/ein.2016.4.13
  5. Numerical analysis of second-order effects of externally prestressed concrete beams vol.35, pp.5, 2010, https://doi.org/10.12989/sem.2010.35.5.631
  6. MECHANICAL BEHAVIOUR OF COMPOSITE GIRDERS SUBJECTED TO HOGGING MOMENT: EXPERIMENTAL STUDY vol.67, pp.3, 2009, https://doi.org/10.2208/jscejseee.67.583
  7. MECHANICAL BEHAVIOUR OF COMPOSITE GIRDERS SUBJECTED TO HOGGING MOMENT: EXPERIMENTAL STUDY vol.28, pp.2, 2009, https://doi.org/10.2208/jsceseee.28.29s