Korean Journal of Materials Research (한국재료학회지)

Materials Research Society of Korea (한국재료학회)
권호 표지
DOI QR코드

DOI QR Code

Effect of Protective layer on LTCC Substrate for Thin Metal Film Patterns

LTCC 보호층 형성에 따른 박막 전극패턴에 관한 연구

  • Published : 2009.07.27
Download PDF
⟨ Previous Next ⟩

Abstract

Metal thin film patterns on a LTCC substrate, which was connected through inner via and metal paste for electrical signals, were formed by a screen printing process that used electric paste, such as silver and copper, in a conventional method. This method brought about many problems, such as non uniform thickness in printing, large line spaces, and non-clearance. As a result of these problems, it was very difficult to perform fine and high resolution for high frequency signals. In this study, the electric signal patterns were formed with the sputtered metal thin films (Ti, Cu) on an LTCC substrate that was coated with protective oxide layers, such as $TiO_2$ and $SiO_2$. These electric signal patterns' morphology, surface bonding strength, and effect on electro plating were also investigated. After putting a sold ball on the sputtered metal thin films, their adhesion strength on the LTCC substrate was also evaluated. The protective oxide layers were found to play important roles in creating a strong design for electric components and integrating circuit modules in high frequency ranges.

Keywords

References

  1. T. Rabe and W. A. Schiller, J. Appl. Ceram. Technol., 2(5), 374 (2005) https://doi.org/10.1111/j.1744-7402.2005.02038.x
  2. Y. Fang, M. T. Lanagan, D. K. Agrawal, G. Y. Yang, C. A. Randall, T. R. Shrout, A. Henderson, M. Randall and A. Tajuddin, J. Electroceramics, 15, 13 (2005) https://doi.org/10.1007/s10832-005-0374-8
  3. A. Bellosi, F. Monteverde and D. Sciti, Int. J. Appl. Ceram. Technol., 3(1), 32 (2006) https://doi.org/10.1111/j.1744-7402.2006.02060.x
  4. J. Cheng, D. Agrawal, Y. Zhang and R. Roy, J. Electroceramics, 9, 67 (2002) https://doi.org/10.1023/A:1021646219797
  5. M. Hagymasi, A. Roosen, R. Karmazin, O. Dernovsek and W. Haas, J. Europ. Ceram. Soc. 25, 2061 (2005) https://doi.org/10.1016/j.jeurceramsoc.2005.03.011
  6. S. Cynthia and M. Cisneros, Sens. Actuators A., 138, 63 (2007) https://doi.org/10.1016/j.sna.2007.04.059
  7. E. Polzer, Zero-Shrinking Sintering Process, p. 7-10, Mcgraw-Hill, USA (2007)
  8. W. Tarn, CRC handbook of metal etchants, p. 1258, CRCPress, UK (1990)
  9. N. K. Kang, Multilayer interconnection nano materials and high integration process technology, p. 23-29, Ceramics, Seoul (2007)
  10. M. K. Russak and J. Creter, J. Electrochem. Soc., 131, 556 (1984) https://doi.org/10.1149/1.2115626
  11. L. I. Missel and R. Glang, Handbook of thin film technology, p. 150-152, Mcgraw-Hill, USA (1970)
  12. M. Jobin, M. Taborelli and P. Descouts, J. Appl. Phys., 77, 5149 (1995) https://doi.org/10.1063/1.359259
  13. L. J. Alemany, E. Pardo and J. M. Blasco, Mater. Charact., 44. 271 (2000) https://doi.org/10.1016/S1044-5803(99)00066-2
  14. S. Ban, Y. Iwaya, H. Kono and H. Sato, Dent. Mater., 12, 1115 (2006) https://doi.org/10.1016/j.dental.2005.09.007
  15. A. T. Gwathmey, Electrochem. Soc. Meet., WDC, 12 (1957)
  16. K. Holloway and R. Sinclair, J. Appl. Phys., 61, 1359 (1987) https://doi.org/10.1063/1.338114