소성∙가공 (Transactions of Materials Processing)

  • 제18권4호
  • /
  • Pages.342-346
  • /
  • 2009
  • /
  • 1225-696X(pISSN)
  • /
  • 2287-6359(eISSN)
한국소성∙가공학회 (The Korean Society for Technology of Plasticity and materials processing)
권호 표지
DOI QR코드

DOI QR Code

구리-타이타늄 복합선재의 번들압출 성형특성

Forming Characteristics for the Bundle Extrusion of Cu-Ti Bimetal Wires

  • 발행 : 2009.07.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Forming characteristics for the bundle extrusion of Cu-Ti bimetal wires are investigated, which can identify the process conditions for weak mechanical bonding at the contact surface during the direct extrusion of a Cu-Ti bimetal wire bundle. Bonding mechanism between Cu and Ti is assumed as a cold pressure welding. Then, the plastic deformation at the contact zone causes mechanical bonding and a new bonding criterion for pressure welding is developed as a function of the principal stretch ratio and normal pressure at the contact surface by analyzing micro local extrusion at the contact zone. The averaged deformation behavior of Cu-Ti bimetal wire is adopted as a constitutive behavior at a material point in the finite element analysis of Cu-Ti wire bundle extrusion. Various process conditions for bundle extrusions are examined. The deformation histories at the three points, near the surface, in the middle and near the center, in the cross section of a bundle are traced and the proposed new bonding criterion is applied to predict whether the mechanical bonding at the Cu-Ti contact surface happens. Finally, a process map for the direct extrusion of Cu-Ti bimetal wire bundle is proposed.

키워드

참고문헌

  1. S. Imamura, T. Murakami, K. Ikeda, Z. Chen, 2000, Fabrication of Three-Layer Pipes Composed of ZrO2, and Stainless Steel by Multi-Billet Extrusion method, J. Japan. Soc. Tech. Plast., Vol. 41, pp. 131-165
  2. Y. M. Hwang, T. F. Hwang, 2002, An Investigation into the Plastic Deformation Behavior within a Conical Die During Composite Rod Extrusion, J. Materials Processing Tech. Vol. 121, No. 2-3, pp. 226-233 https://doi.org/10.1016/S0924-0136(01)01254-7
  3. A. K. Tayal, R. Natarajan, 1981, A Finite Element Analysis of Axisymmetric Extrusion of Composite Rods, Int. J. Mach. Tool Des. Res. Vol. 21, pp. 227-235 https://doi.org/10.1016/0020-7357(81)90020-2
  4. B. Avitzur, R. Wu, S, Talbert, Y. T. Chou, 1982, Criterion for the Prevention of Core Fracture during Extrusion of Bimetal Rods, J. Eng, Ind., Vol. 104, pp. 293-304 https://doi.org/10.1115/1.3185833
  5. Yeo-Kwon Yun, Hee-Nam Kim and Yong-Su Kim, 2000, The Effect of Process Parameter in Direct Extrusion of Copper Clad Aluminum Composite Materials, Journal of the KIIS, Vol. 15, No. 4
  6. Hee-Nam Kim, Won-Young Kang, 2001, Journal of Research Institute of Industrial Technology, Vol. 20
  7. Hee-Nam Kim, Sung-Hoon Park, 2001, Interface Bonding of Copper Clad Aluminum Rods by the Direct Extrusion, Journal of Research Institute of Industrial Technology, Vol. 20
  8. Jeong-In Kim, Chung-Gil Kang and Hyok-Chon Kwon, 1999, Extrusion Process Analysis of Al/Cu Clad Composite Materials by Finite Element Method, J. Kor. Soci. Comp. Mater, Vol. 12, No. 5
  9. Jong-Ho Kim, Byung-Kwon Suh, Hyuk-Chon Kwon and Woo Young Yoon, 2000, Extrusion Conditions and Bonding Characterization of Al/Cu Clad Composite Material Fabricated by Indirect Extrusion, J. Kor. Inst. Met. & Mater, Vol. 38, No. 3, pp. 474-480
  10. Jae-Seol Lee, Hyuk-Chon Kwon and Mok-Soon Kim, 2000, A Study on the Fabrication and Properties of Ti-Cu Clad Extrudates, J. Kor. Inst. Met & Mater, Vol. 38, No. 2, pp. 388-396
  11. J. M. Seo, J. H. Noh, K. H. Min, B. B. Hwang, K. C. Ham, D. H. Jang, 2007, Inhomogeneous Deformation Between Construction Materials in Cu/Al and Fe/Al Co-extrusion Processes, Trans. Materials Processing, Vol. 16, No.7, pp. 530-537 https://doi.org/10.5228/KSPP.2007.16.7.530
  12. D. H. Jang, 2009, Influence of Process Parameters on the Forming Compatibility in Composite Extrusion Rods, Trans. Materials Processing, Vol. 18, No.1, pp. 80-86 https://doi.org/10.5228/KSPP.2009.18.1.080
  13. P. Kazanowski, M. E. Epler, W. Z. Misolek, 2004, Bi-metal rod Extrusion Process and Product Optimization, Mater. Sci. & Eng. A. Vol. 369, pp.170-180 https://doi.org/10.1016/j.msea.2003.11.002
  14. J. S. Kim, Y-S Lee, S-H Yoon, 2005, Development of a Process Map for Bundle Extrusion of Cu-Ti Bimetal Wires, Proc. of Korean Soc. for Tech. Plasticity, pp. 393-397
  15. ABAQUS User’s Manual