Journal of the Korean Society for Precision Engineering (한국정밀공학회지)

Korean Society for Precision Engineering (한국정밀공학회)
권호 표지

An Experimental Study on the Determination of Efficient Superfinishing Conditions Using Polishing Film

연마필름을 이용한 효율적인 수퍼피니싱 조건의 결정에 관한 실험적 연구

  • Published : 2009.08.01
Download PDF
⟨ Previous Next ⟩

Abstract

Recently, many studies are being conducted to realize high quality polishing technology, but because of high dependence on field experience and insufficient research for ultra-precision polishing technology, it is difficult to establish standardization of polishing conditions. The purpose of this study is to determine high-efficiency superfinishing conditions which are applicable in the field of machining. To achieve this, we have a developed a superfinishing device and conducted a series of polishing experiments for mechanical materials such as SM45C, Brass, Al7075, and Ti, from the perspective of oscillation speed, the rotational speed of the workpiece, contact roller hardness, contact pressure, and feed rate. From the experimental results, it was confirmed that the polishable superfinishing conditions range and efficient feed rate of polishing film can be determined.

Keywords

References

  1. Namba, Y. and Tsuwa, H., "Wear Process of Abrasive Belt-Studies on the Belt Grinding(3rd Report)," Japan Society of Precision Engineering, Vol. 38, No. 2, pp. 202-208, 1972 https://doi.org/10.2493/jjspe1933.38.202
  2. Susuki, K., Uematsu, T., Ohashi, H., Kitajima, K., Suga, T., Imanaka, O. and Kobayashi, A., "Development of a New Mechanochemical Polishing Method with a Polishing Film for Ceramic Round Bars," Annals of the CIRP, Vol. 41, No. 1, pp. 339-342, 1992 https://doi.org/10.1016/S0007-8506(07)61218-9
  3. Chung, W. J., Kim, J. M., Park, K. B., Ju, J. H. and Sin, O. C., "A Study on Design of Polishing Film Transfer Guide by using TRIZ," Proc. of KSPE Autumn Conference, pp. 387-388, 2006
  4. Hanaoka, T., Sakamiya, K., Kobayashi, A. and Harada, M., "Abrasive Belt Grinding Performance," Annals of the CIRP, Vol. 25, pp. 225-228, 1976
  5. Kuppuswamy, G., "An Investigation of the effect of magnetic Field on Electrolytic Diamond Grinding," Wear, Vol. 54, No. 2, pp. 257-272, 1979 https://doi.org/10.1016/0043-1648(79)90119-4
  6. Kim, H. B., Kim, K. S. and Namgung, S., "A Study on the Mirror Surface Finishing of SM45C using Micro Abrasive Film," Journal of the Korean Institute of Industrial Educators, Vol. 22, No. 1, pp. 190-198, 1997
  7. Jung, S. Y., Jung, Y. G. and Sin, O. C., "A Study on the practical Application Conditions of Polishing Film for High-Efficiency Superfinishing," Proc. of KSMPE Autumn Conference, pp. 115-121, 2008