DOI QR코드

DOI QR Code

Estimation of the distribution density of snow crab, Chionoecetes opilio using a deep-sea underwater camera system attached on a towing sledge

예인식 심해용 비디오카메라를 이용한 대게의 서식밀도 추정

  • An, Heui-Chun (Fisheries Resources & Environment Division, East Sea Fisheries Research Institute, NFRDI) ;
  • Lee, Kyoung-Hoon (Fisheries Engineering Division, National Fisheries Research & Development Institute) ;
  • Bae, Jae-Hyun (Fisheries Engineering Division, National Fisheries Research & Development Institute) ;
  • Bae, Bong-Seong (Fisheries Resources & Environment Division, East Sea Fisheries Research Institute, NFRDI) ;
  • Shin, Jong-Keun (Research & Development Planning Division, NFRDI)
  • 안희춘 (동해수산연구소 자원환경과) ;
  • 이경훈 (국립수산과학원 수산공학과) ;
  • 배재현 (국립수산과학원 수산공학과) ;
  • 배봉성 (동해수산연구소 자원환경과) ;
  • 신종근 (국립수산과학원 연구기획과)
  • Published : 2009.08.31

Abstract

This study shows that the distribution density of snow crab, Chionoecetes opilio, was estimated using an underwater video monitoring system attached on the towing sledge. The field experiments were carried out at the coastal waters around Chuksan, East Sea, where ranged from 110 to 130m depth during September and October 2007. The sledge was towed for 40 minutes and the towing speed was controlled between 1.5 to 1.7 knot and each research areas were calculated to multiply towed distance by the detection width of the video monitoring system(1.2m), and then, distribution density of snow crab in each observations were estimated as a counted number of crab per 1,000$m^2$. The result shows that their survey, taken between two months, reflected similar results during survey period, and the maximum and mean distribution densities in September estimated to be 77.0(number/1,000$m^2$) and 19.9, respectively, and those of October were 36.0 and 21.8, respectively.

Keywords

References

  1. Chen, L. S., Y.W. Mai and B. Cotterell, 1989. Impact fracture energy of mineral-filled polypropylene. Polymer Eng. and Sci., 29(8), 505-512 https://doi.org/10.1002/pen.760290804
  2. Fernando, G. and G.R. Dickson, T. Anderson, H. Reiter and B. Harris, 1988. Fracture of hybrid composites : part 1. J. Mat. Sci., 23, 3732-3743 https://doi.org/10.1007/BF00540521
  3. Mashall, G.P., J.G. Williams and C.E. Turner, 1973. Fracture toughness and absorbed energy measurements in impact test on brittle materials. J. Mat. Sci., 8, 949-956 https://doi.org/10.1007/BF00756625
  4. Mateen, A.Q. and S.A. Siddiqi, 1989. Impact properties of polyurethane and glass fibres reinforced composites. J. Mat. Sci., 24, 4516-4524 https://doi.org/10.1007/BF00544538
  5. Munro, M. and C.P.Z. Lai, 1988. The elevated temperature dependence of fracture energy mechanism of hybrid carbon-glass fiber reinforced composites. J. Mat. Sci., 23, 3129-3168 https://doi.org/10.1007/BF00551284
  6. Plati, E. and J.G. Williams, 1975. The determination of the fracture parameters of polymers in impact. Polymers Eng. Sci., 15, pp. 470-477 https://doi.org/10.1002/pen.760150611
  7. Sova, M., M. Raab, and M. Slizova, 1993. Polypropylene composite materials oriented by solid-state drawing : low-temperature impact behaviour. J. Mat. Sci., 28, 6516-6523 https://doi.org/10.1007/BF01352223
  8. Tomlinson, W. J. and J.R. Holland, 1994. Pultrusion and properties of unidirectional glass fibre-Polypropylene matrix composites. J. Mat. Sci. Letters, 13, 675-677 https://doi.org/10.1007/BF00271231
  9. Um, Y.S., K.H. Park, S.W. Koh, and H.J. Kim, 1999. A study on the impact fracture behavior of glass fiber polypropylene composites. Bull. Korean Soc. Fish. Tech., 35(4), 421-427
  10. Voelker, M.J., 1991. Low temperature impact properties of long fiber thermoplastic composite molding materials. Polymer Comp., 12(4), 119-121 https://doi.org/10.1002/pc.750120208

Cited by

  1. A study on structural feature and size distribution of swimming fish using an 3 dimensional pattern laser vol.52, pp.2, 2016, https://doi.org/10.3796/KSFT.2016.52.2.103
  2. Measurement of size and swimming speed of Bluefin tuna (Thunnus thynnus) using by a stereo vision method vol.47, pp.3, 2011, https://doi.org/10.3796/KSFT.2011.47.3.214