Journal of the Korean Society for Aviation and Aeronautics (한국항공운항학회지)

The Korean Society for Aviation and Aeronautics (한국항공운항학회)
권호 표지

A Study on the characteristics of the Signals of AE according to Fracture mode of CFRP

Carbon Fiber Reinforced Plastic(CFRP)복합재의 파괴 거동에 따른 Acoustic Emission(AE)신호 특성에 관한 연구

  • 이경원 (한국항공대학교 대학원 항공우주 및 기계공학과) ;
  • 김종현 (한국항공대학교 대학원 항공우주 및 기계공학과) ;
  • 김재성 (한국항공대학교 대학원 항공우주 및 기계공학과) ;
  • 이보영 (한국항공대학교 항공우주 및 기계공학부)
  • Received : 2009.12.14
  • Accepted : 2009.12.27
  • Published : 2009.12.31
Download PDF
⟨ Previous Next ⟩

Abstract

Recently, the wide range of the composite materials is used for the making airplanes, trains and automobiles body for the lightweight. Despite having complex structures, composite materials usually have well defined mechanical characteristics. However, composite materials are difficult to understand the fracture mechanism clearly by simple mechanical test. Nondestructive evaluation (NDE) combined with mechanical testing can play a more important role and especially Acoustic Emission Testing (AET) would become known to be a useful tool to assess damage and fracture behavior of composites. In this study The experiment was performed to acquire the acoustic emission signal during tensile test using unidirectional CFRP specimen and the data was analyzed the acoustic emission parameters with the waveform.

Keywords

References

  1. Jcantwell, W. J. and Morton. J., 1985, "Residual Strength Assessment of Impact Damaged CFRP Laminates", Proceeding of Int. Conf. Post-Failure Analysis of FIBER Reinforecd Composites, Dayton, Ohio, Vol. 3, PP. 241-257
  2. Malick, P. K., 1988, Fiber-Reinforced Composites, Marcel Decker, Incc., pp. 3-4
  3. X. Lu, W. Sachse and I. Grabec, "Use of an automatic modeler and a small receiver array for acoustic emission (AE) source location", Ultrasonics, Vol. 36, No. 5, pp. 539-547, (1998) https://doi.org/10.1016/S0041-624X(97)00099-1
  4. L. Carlsson and B. Norrbom, "Acoustic emission from graphite/epoxy composite laminates with special reference to delamination", Journal of materials science, Vol. 18, No. 8, pp. 2503-2509 (1983) https://doi.org/10.1007/BF00541857
  5. J. Awerbuch, M.R. Gorman, and M. Madhundar, "Monitoring acoustic emission during quasi static loading unloading cycles of filament wound graphite epoxy laminate coupons", Materials Evaluation, Vol. 43, No. 6, pp.754-764 (1985)
  6. M. Sergeon, E. Vanswijgenhoven, m. Wevers, O. Van Der Biest, "Acoustic Emission during Tensile Testing of SiC fibre reinforced BMAS glass ceramic composites", Composites Part A, Vol.28, no.5, pp.473-480 (1997) https://doi.org/10.1016/S1359-835X(96)00147-9
  7. Joung-Hwi Yoon, Sung-Oan Park, Zhang-Kyu Rhee, and Chang-Ki Woo "A Study on the Fracture Characteristics of CFRP by Axoustic Emission(1)" 한국공작기계학회 추계학술대회 논문집, pp. 283-288
  8. 정희돈, 권영각, 장래웅, 용접부검사방법으로서의 Acoustic Emission, 대한용접학회지, 11-2,(1993) pp. 1-2
  9. Sae-Kyoo Oh, Jung-Hwan Oh, Tae-Eun Jeon, Kyung-Kyoon and Myung-Suk Oh, "Real-Time Evaluation of Friction Weld Quality of Small-Type Hydraulic Valve Spool by Acoustic Emission", 대한 용접,접합학회지 제 12권 2호 (1994), pp.97-107